Showing posts with label control relay. Show all posts
Showing posts with label control relay. Show all posts

Sunday, November 29, 2020

Littelfuse LLC6 Series - Low Level Cutoff

 Low Level Cutoff Liquid Level Control

LIttelfuse LLC6 Series from Flow Factor


The Littelfuse LLC6 Series is a plug-in, single-probe conductive liquid level control designed for low liquid level cutoff protection. It offers a factory fixed time delay of 1 - 60s and is available in input voltages of 24, 120, or 230VAC. LED indicator illuminates whenever the Littelfuse LLC6’s 10A, SPDT output relay is energized. Available with automatic/manual reset or a special manual reset with power outage feature, which auto resets the unit when power is restored and the water level is acceptable. 24VAC and 120VAC units are recognized as limit switches under UL353 (230VAC units are UL508) and CSA certified under Standard 14.

Littelfuse LLC6 Liquid Level Cutoff Relay










Operation: 

Automatic Reset (Reset terminals not connected): When liquid rises to the low level cutoff probe, the output relay and the LED indicator energize. When the liquid falls below low level cutoff probe, the output relay and the LED indicator de-energize after a fixed time delay.

Manual Reset (Reset switch connected)

When the liquid level falls below the low level probe, the output relay and LED de-energize after a fixed time delay. When the liquid level rises to the low level probe, the output relay and LED indicator remain de-energized until the manual reset switch is opened; then they energize immediately

Power Outage Manual Reset (Reset switch connected):

A power outage causes the output relay and LED indicator to de-energize. Upon restoration of power, if the liquid level is above the low level probe, the output relay and LED indicator will re-energize. If the liquid level is below the low level probe, the output relay and LED indicator remain de-energized until the Normally Closed (NC) reset switch is opened.

Features & Benefits:

Isolated 12VAC on Probe >> Prevents Electrolysis

Industry Standard 11 Pin Connection >> No Special Connections

LED indication >> Visual Indication we energized

Power Outage Protection >> Automatically resets after power outage

Littelfuse Part Numbers:

LLC6210F10M: 

24Vac, 10 seconds Delay, 10K Ohms, Automatic/Manual Reset

LLC6410F10M: 

120Vac, 10 seconds Delay, 10K Ohms, Automatic/Manual Reset

LLC643F10M: 

120Vac, 3 seconds Delay, 26K Ohms, Automatic/Manual Reset

LLC6610F10M: 

230Vac, 10 seconds Delay, 5K Ohms, Power Outage Manual Reset

Littelfuse LLC6 Accessories:

BZ1 Panel Mount Kit
NDS-11 11 pin Socket
PSC11 Hold Down Clips
PHST-38QTN Electrode
LLP-24 Threaded Probe (24 inches)

Contact Flow Factor HERE!

Flow Factor
216-765-4231
www.flowfactor.com

Littelfuse LLC6...Littelfuse LLC6...Littelfuse LLC6...Littelfuse LLC6...Littelfuse LLC6

Monday, October 26, 2020

Littelfuse PC-102 Series Pump Controllers

 Littelfuse PC-102 Series Pump Controllers from Flow Factor

For a Quote, Click HERE!

Littelfuse PC-102CICI-DL:

Dual seal-leak detector uses inputs to sense seal failures and energize the output relay. Input logic direct or inverted is DIP switch selectable.

Littelfuse PC-102CICI-LT:

Seal-leak and over-temperature detector uses one input to sense seal failures and the temperature input to detect motor overheating. Configurable to suit various probes. Seal input logic direct or inverted, plus over-temperature trip reset automatic or manual, is DIP switch selectable. 

Littelfuse PC-102 Pump Protection Controller










Littelfuse PC-102 Description

The LIttelfuse PC-102 series is a dual-channel switch that provides dual protection against seal failures and over-temperature in submersible pumping applications.

The relays have two form-C isolated output relays and two LEDs, which illuminate when each associated output relay is energized.

The sensitivity adjustment (4.7k-100kOhms) allows you to define the input impedance at which the output relays will change state. The sensitivity for the over-temperature detector can be set to 4k Ohms with use of the DIP switches.

Littelfuse PC-102 Specifications

Input Characteristics 

Frequency 50/60Hz 

Functional Characteristics: 

Probe Sense Voltage 5vdc pulsed 

Sensitivity 4.7k-100kΩ Sensitivity (for temp) Selectable 4kΩ with DIP switches 

Input Logic Direct or inverted 

Debounce Time Delay 0.5 or 2 seconds 

Output Characteristics:

Relay Output Rating (2 Form C isolated) 

Pilot Duty 180VA @ 120VAC, C150,  General Purpose 5A @ 240VAC 

General Characteristics: 

Temperature Range -20° to 55°C (-4° to 131°F) 

Maximum Input Power 2 W 

Depluggable Connector Phoenix Contact-Series MSTB plugs 

Output Relay Status Indicators LEDs 

Terminal Torque 4.5 in.-lbs. 

Wire range 12-20 AWG 

Standards Passed:

Electrostatic Discharge (ESD) IEC 61000-4-2, Level 3, 6kV contact, 8kV air. 

Radio Frequency Immunity (RFI) IEC 61000-4-3, Level 3, 10V/m 

Fast Transients IEC 61000-4-4, Level 3, 4kV input power 2kV inputs/outputs 

Safety Marks: 

UL UL508 (File #E68520) 

Dimensions H 88.9 mm (3.5”); W 52.93 mm (2.08”); D 59.69 mm (2.35”) 

Weight 0.9 lb. (14.4 oz., 408.23 g) 

Mounting Method 35mm DIN rail or Surface Mount (#6 or #8 screws)

For a Quote, Click HERE!

Flow Factor

216-765-4231

www.flowfactor.com

Littelfuse...PC-102...Littelfuse...PC-102...Littelfuse...PC-102...Littelfuse...PC-102

Saturday, October 24, 2020

5 Channel Pump Controller from Littelfuse - PC-105

PC-105 Series - 5-Channel Pump Controller

from Littelfuse and Flow Factor

For a Quote, Click HERE!

The Littelfuse PC-105 is a 5-channel pump controller designed to handle multiple pump applications. Alternatively, it can operate as a 5-channel switch. The Little Fuse PC-105’s control functions support all of the popular industry standard multi-pump pump-up and pump-down configurations. It can indicate low, high and out-of-sequence alarms and use alternating and non-alternating pump control. The non-alternating pump can be used as a jockey pump or emergency pump. Using the built-in DIP switches, individual pumps can be disabled when taken out of service for repair or maintenance.

Littelfuse PC-105 Five Channel Pump Control









Features:

Compact Design

Low, High and Out of Sequence alarms

Variable time delay/lag pump delay from 2-255 seconds

DuPlex SPS (seperate pump stop) pump control

DuPlex, TriPlex or QuadraPlex pump control

Pump-up or pump-down functions

External Silence, reset and alternation configuration

Five Channel Relay Configuration

DIN rail or surface mountable

SPECS:

120 VAC supply power

50/60 hz frequency

Probe Sense Voltage is 5vdc continuous

Relay Output Rating is 7 am[ps @240 VAC

Max Input Power is 4 watts

12-20 AWG wire size range

Pump In-Rush delay is 2 seconds

Electrostatic discharge  (ESD) is IEC 61000-4-2, Level 3, 6kV contact, 8kV air

Radio Frequency Immunity (RFI) is Level 3, 10V/m

Fast Transients is Level 3, 4kV input power

UL listed UL508

Dimensions: 3.7 x 5.0 x 2.4 inches and 1.2 Pounds

Littelfuse PC-105 Pump Control Wiring












For a Quote, Click HERE!

Flow Factor

216-765-4231

www.flowfactor.com

Littelfuse...PC-105...Littelfuse...PC-105...Littelfuse...PC-105...Littelfuse...PC-105