Tuesday, December 31, 2013

Penberthy Jet Pump Applications


Flow Factor carries Penberthy - Pentair Jet Pumps

Problems/Solutions Using Jet Pumps
Below are listed some of the problems encountered by our users in different industries and the solutions that were used to solve these problems. These industries include:
Water/Waste Water Treatment
Marina
Automotive
Food Processing
Environmental
Water Collection Pits
Railway
Mixing/Blending
Barge Terminal
Tank Heating
Brewery
Transporting Solids
Corn Processing
Heating Systems

Water/Waste Water Treatment:
Problem

A water treatment plant wanted to entrain activated carbon as a filtering media to treat and regenerate application material to meet EPA regulations prior to disposing in a sewer.
Solution

A Penberthy Model ELL was used to hydraulically transport the carbon media. Model LM could also have been used
Problem

A treatment facility needed to pump and mix a variety of chemicals in a water stream to control pH levels.
Solution

Using a Penberthy L Series liquid motive jet, they were able to do this in-line

Automotive Industry:
Problem

Assemblers had to hold windshields in place during assembly.
Solution

Using a Penberthy G Series jet, they were able to generate a vacuum to hold the windshield while it was positioned.
Problem

A tire manufacturer needed to evacuate steam from a bladder in order for the tire to be removed from the tire press.
Solution

A Penberthy G Series jet was installed to evacuate the steam and speed up the production cycle.
Problem

Settling of materials in electrocoat and pretreatment tanks in automotive paint lines had to be eliminated in order to improve overall paint quality.
Solution

Installation of Penberthy Model TME (Tank Mixing Eductors) provided low electrical conductivity and smooth mixing flow characteristics, improving paint finishes.

Environmental Ground Water Testing:
Problem

A chemist required an efficient method of extracting ground water samples for chemical analysis.
Solution

Using Penberthy Series L jet pumps, samples were taken and transferred to holding tanks for evaluation and testing.

Railcar Cleaning:
Problem

Railcars need an effective method of removing a variety of powdered materials.
Solution
A simple and effective method would be to use a Penberthy GST Model jet using compressed air as the motive

Barge Terminals/Barge Cleaning:
Problem

Barge terminal operators need a cost-effective method of removing rainwater from barges.
Solution
Penberthy Model L Series jet pumps are used to hydraulically pump the water from the barge. This water is transported into another barge for testing and treatment before being discharged back into the river.

Breweries:
Problem

A brewery needed to heat liquids as part of the pasteurization process.
Solution
Using a Penberthy Model SRH, the liquid was heated and pasteurized in-line. In this application, processing was improved by 30%.

Corn Processing Plants:
Problem

A corn processing plant needed an inexpensive and efficient method or removing carbon dust from the bottom of their furnaces.
Solution
They attached a perforated pipe to the suction inlet of a Penberthy Model LM jet, and using water as the motive, a vacuum was created sucking up the carbon dust.

Plastics Industries:
Problem

The company needed an effective means of detecting leaks in molds.
Solution
By using a Penberthy Model LM jet with the suction hooked up to the mold, they were able to generate a vacuum which detected leaks in the mold or seals.

Boat Docks:
Problem

Boats sitting in a marina during the winter months became immobilized due to ice buildup.
Solution
Using a Penberthy Model CTE, warmer water was brought to the surface preventing the water from freezing.

Food Processing:
Problem

A processor potato chips wanted to heat water in a blancher to remove potato skins.
Solution
A Penberthy Model SRH was installed at the bottom of a tank. The water draining from the tank had sufficient head pressure to mix with the steam to allow recirculation back into the tank as well as reaching desired temperature.

Water Collection Pits:
Problem

A number of businesses and homeowners needed an effective way to remove water from sump pits during flooding.
Solution
Penberthy Sump Drainer and L Series jets provided reliable methods of removing the water using no electrical power.

Mixing/Blending Applications:
Problem

A storage tank manufacturer needed to move dry solids - diatomaceous earth - into a blending tank.
Solution
Using a Penberthy Model LM with a Penberthy Washdown Hopper, they were able to mix the earth with the motive fluid and transport it into the blending tank. Once in the tank, a Penberthy Model CTE was used to provide continuous in-tank mixing.

Tank Heating:
Problem

A company needed to maintain a minimum liquid temperature in their tanks, regardless of outside ambient temperatures.
Solution

Using a Penberthy Model CTE as an in-tank heater in conjunction with a simple temperature control system, steam was mixed with the liquid when the outside temperature fell below a certain level.

Transporting Solids:
Problem

A manufacturer of silo systems for wastewater treatment that used wetting cones with powdered activated carbon needed a means of moving the resulting slurry.
Solution

By installing various Penberthy Series L liquid motive jets at the bottom of each cone, the manufacturer was able to move the slurry away using water as the motive.

Heating Systems:
Problem

Condensation pits associated with underground heating systems needed to be emptied.
Solution

A Penberthy model 2-R Sump Drainer was installed in each pit. This stand-alone system uses water as the motive and requires no electrical power.

Flow Factor - 216-765-4231

Friday, December 13, 2013

Penberthy 1/2A GH Jet Pump (Eductor)

Flow Factor has in Stock:

1/2A GH Jet Pump / Eductor in Bronze.



Pentair / Penberthy part number 7000167772

Eductor Model number  GH-4ABZCNTNTNT-01

FLOW FACTOR MODEL NUMBER  1/2AGHBR

CLICK TO ORDER HERE


CLICK HERE  FOR  THE  JET  PUMP/EDUCTOR  MAIN PAGE ON FLOW FACTOR.

866-360-9830
info@flowfactor.com


Saturday, November 30, 2013

Parker 204 Series 1/8 INCH Solenoid Valves

1/8 inch round Bodied Parker 2 way and 3 way Solenoid Valves from Flow Factor

Parker 204 and 304 Series Solenoid Valves provide fluid control for food & beverage, commercial, industrial, instrumentation, transportation and HVAC markets. The 204 (2-way) and 304 (3-way) Valves have stainless steel bodies, Viton seals, 1/8" ports and have pressures from 80 - 950 psi AC voltages, 30 to 390 psi in DC voltages for the 2-way valves and 20-375 psi for the 3-way valves (AC or DC).   RoHS  CE, UL, cUL


Compatible Fluids
Lubricated Air, non-Lubricated Air, Inert Gases, Water, Petroleum Products and additional fluids compatible with the materials of construction. Pressure ratings apply to all compatible fluids within stated temperature ranges.

Optional Construction
Consult Fluid Control Division for alternate materials, alternate coil features including Class H 185oC , other voltage needs etc.

Weight including Conduit Coil:
2-way normally closed 9oz/255g 3-way normally closed 10oz/284g

AC Ambient Temperature Range
32°F (0°C) to 135°F (57°C)

DC Ambient Temperature Range
32°F (0°C) to 125°F (52°C)

AC Media Temperature Range
32°F (0°C) to 240°F (116°C)

DC Media Temperature Range
32°F (0°C) to 240°F (116°C)

NORMALLY CLOSED 2 WAY VALVES:
1/8 Ports, Viton Seals, 303 Stainless Steel Bodies, 0 Minimum Pressure

20CC02EV4   3/64 orifice, 0.06 Cv,  AC Max. Pressure 950  DC Max. Pressure390
20CC02GV4  1/16 Orifice, 0.10 Cv, AC Max Pressure 625, DC Max. Pressure 255
20CC02JV4   5/64 Orifice,  0.15 Cv, AC Max Pressure 450, DC Max Pressure 180
20CC02LV4  3/32 Orifice,  0.22 Cv, AC Max Pressure 320, DC Max Pressure 130
20CC02MV4  7/64 Orifice, 0.28 Cv, AC Max Pressure 245, DC Max Pressure 100
20CC02PV4  1/8 Orifice,  0.32 Cv, AC Max Pressure 175, DC Max Pressure 60
20CC02QV4  5/32 Orifice,  0.38 Cv, AC Max Pressure 100, DC Ma Pressure 30
Add Coils codes below for a complete Solenoid Vale Assembly.

NORMALLY OPEN 2 WAY VALVES:
1/8 Ports, Viton Seals, 303 Stainless Steel Bodies, 0 Minimum Pressure

20CF02AV4   1/32 orifice, 0.02 Cv,  AC Max. Pressure 375  DC Max. Pressure 375
20CF02EV4  3/64 Orifice, 0.06 Cv, AC Max Pressure 230, DC Max. Pressure 230
20CF02GV4   1/16 Orifice,  0.10 Cv, AC Max Pressure 150, DC Max Pressure 150
20CF02JV4   5/64 Orifice,  0.14 Cv, AC Max Pressure 105, DC Max Pressure 105
20CF02LV4   3/32 Orifice, 0.20 Cv, AC Max Pressure 80, DC Max Pressure 80

Add Coils codes below for a complete Solenoid Vale Assembly.

Encapsulated Watertight Designs. Available as Modular Coils or for Fully Assembled Valves.

Conduit Coil Coil Code: C4
Construction: - ClassF - 18” lead wires - Ground wire - 1/2” NPT conduit hub - NEMA 4X, IP65 protection AC: 10 Watts except 2 Way Normally Closed is 8.5 Watts DC: 8 Watts

C4A ~ 12vdc
C4B ~ 24 vdc
C4E ~ 24/60 AC
C4F ~ 120/60 AC
C4G ~ 240/60 AC

Leaded Coil Coil Code: B4
Construction: - ClassF - 18” lead wires - Ground wire AC: 10 Watts except 2 Way Normally Closed is 8.5 Watts DC: 8 Watts

B4A ~ 12vdc
B4B ~ 24 vdc
B4E ~ 24/60 AC
B4F ~ 120/60 AC
B4G ~ 240/60 AC

DIN Coil Coil Code: D6
Construction: - ClassH - DIN 43650A/ISO 4400 configuration - NEMA 4X, IP65 protection with a suitable plug and gasket AC: 10 Watts except 2 Way Normally Closed is 8.5 Watts DC: 8 Watts

D4A ~ 12vdc
D4B ~ 24 vdc
D4E ~ 24/60 AC
D4F ~ 120/60 AC
D4G ~ 240/60 AC


Parker 20CC02EV4C4F, 1/8 inch 2-way Valve, 0-950 psi, 120/60, NC, Nema 4
Parker 20CC02GV4C4F, 1/8 inch 2-way Valve, 0-625 psi, 120/60, NC, Nema 4
Parker 20CC02LV4C4F, 1/8 inch 2-way Valve, 0-320 psi, 120/60, NC, Nema 4
Parker 20CC02MV4C4F, 1/8 inch 2-way Valve, 0-245 psi, 120/60, NC, Nema 4
Parker 20CC02PV4C4F, 1/8 inch 2-way Valve, 0-175 psi, 120/60, NC, Nema 4
Parker 20CC02QV4C4F, 1/8 inch 2-way Valve, 0-100 psi, 120/60, NC, Nema 4

Parker 20CC02EV4C4B, 1/8 inch 2-way Valve, 0-390 psi, 24vdc, NC, Nema 4
Parker 20CC02GV4C4B, 1/8 inch 2-way Valve, 0-255 psi, 24vdc, NC, Nema 4
Parker 20CC02LV4C4B, 1/8 inch 2-way Valve, 0-130 psi, 24vdc, NC, Nema 4
Parker 20CC02MV4C4B, 1/8 inch 2-way Valve, 0-100 psi, 24vdc, NC, Nema 4
Parker 20CC02PV4C4B, 1/8 inch 2-way Valve, 0-60 psi, 24vdc, NC, Nema 4
Parker 20CC02QV4C4B, 1/8 inch 2-way Valve, 0-30 psi, 24vdc, NC, Nema 4

NEMA 7 COILS AVAILABLE FOR EXPLOSION PROOF APPLICATIONS.


WWW.FLOWFACTOR.COM

Barksdale Diaphragm Pressure Switches

Barksdale Diaphragm Pressure Switches from Flow Factor


Barksdale D1T, D2T Series
Barksdale's D1T & D2T Terminal Block Diaphragm Pressure Switches offer superior accuracy in a robust package, making them the ideal solution to your industrial pressure control needs. These switches are ideal for applications requiring water-tight, NEMA 4 housings a covered terminal strip and tamper-proof external adjustment. (Factory set models are also available.) With pressure ranges up to 150 psi, these housed diaphragm pressure switches are suitable for use in either positive pressure or vacuum applications. Single-and dual-circuit models are available. Housed models feature a durable, anodized aluminum enclosure. For applications requiring a highly accurate switch in a durable package, Barksdale's D1T & D2T Terminal Block Diaphragm Pressure Switches are the ideal choice.



Terminal Block Diaphragm Switch by Barksdale
NEMA 4 Housing with terminal strip, tamper-proof external adjustment, up to 150 psi.
Single and Dual Terminal Block Diaphragm




Applications
   Machine tools
   Pneumatics
   Medical
   Marine & shipbuilding
   Pump & compressor monitoring
   Oil & gas
   Water equipment
   Mining
   Lubrication equipment

Features
   High reliability
   High accuracy
   NEMA 4
   Ideal for pressure and vacuum applications
   Single and dual switching capability
   Tamper-proof external adjustment
Diaphragm Seal Option Available


Barksdale Pressure Switch, D2T-H2SS, 1/4 inch SS NPT, .02 - 1.70 PSI range, 2 Settings
Barksdale Pressure Switch, D1T-A3SS, 1/4 inch SS NPT, .03 - 3.00 PSI range,1 Setting
Barksdale Pressure Switch, D2T-A3SS, 1/4 inch SS NPT, .03 - 3.00 PSI range, 2 Settings
Barksdale Pressure Switch, D1T-H18SS, 1/4 inch SS NPT, .40 - 18.00 PSI range, 1 Setting
Barksdale Pressure Switch, D2T-H18SS, 1/4 inch SS NPT, .40 - 18.00 PSI range, 2 Settings
Barksdale Pressure Switch, D1T-A80SS, 1/4 inch SS NPT, .50 - 80.00 PSI range, 1 Setting
Barksdale Pressure Switch, D2T-A80SS, 1/4 inch SS NPT, .50 - 80.00 PSI range, 2 Settings
Barksdale Pressure Switch, D1T-H150SS, 1/4 inch SS NPT, 1.50 - 150.00 PSI range, 1 Setting
Barksdale Pressure Switch, D2T-H150SS, 1/4 inch SS NPT, 1.50 - 150.00 PSI range, 2 Settings


Barksdale D1S, D2S, D1H, D2H Series
Barksdale's Diaphragm Pressure Switches offer superior accuracy in a robust package, making them the ideal solution to your industrial pressure control needs. Diaphragm switches are ideal for applications demanding instrument class accuracy and where pressure pulsations are less than 25 cycles per minute. Available in various pressure ranges up to 150 psi, diaphragm switches are suitable for use in either positive pressure or vacuum applications. Single, and dual, and triple circuit models are available. Housed models (D1H & D2H) feature a durable, anodized aluminum enclosure with an integrated 1/2" NPT conduit connector, a tamper-resistant cover for the setpoint adjustment screws, and are rated to NEMA 4 as a standard.  For applications requiring a highly accurate switch in a durable package, Barksdale's Diaphragm Pressure Switches are the ideal choice.


Stripped & Housed Diaphragm Switches by Barksdale
Barksdale D1S, D2S Series
Stripped, suitable for control box installations with adjustments up to 150 psi.
Barksdale D1H, D2H, D3H Series
NEMA 4 Housing, tamper-proof external adjustment, up to 150 psi.

Applications
   Pump & compressor monitoring
   Engine monitoring
   Machine tools
   Hydraulic power units
   Medical equipment
   Waste management
   Food & beverage
   Factory automation
    Metal working

Features
   Stripped and housed versions available
   High accuracy
   Ideal for pressure or vacuum
   Easy setpoint adjustment
   NEMA 4 (Housed Models)
   Up to 3 setpoints available in one switch
    Diaphragm Seal Option Available


Barksdale Pressure Switch, D2H-A3SS, 1/4 inch SS NPT, .03 - 3.00 PSI range, 2 settings
Barksdale Pressure Switch, D1H-H18SS, 1/4 inch SS NPT, .40 - 18.00 PSI range, 1 setting
Barksdale Pressure Switch, D2H-H18SS, 1/4 inch SS NPT, .40 - 18.00 PSI range, 2 settings
Barksdale Pressure Switch, D1H-A80SS, 1/4 inch SS NPT, .50 - 80.00 PSI range, 1 setting
Barksdale Pressure Switch, D2H-A80SS, 1/4 inch SS NPT, .50 - 80.00 PSI range, 2 settings
Barksdale Pressure Switch, D1H-H150SS, 1/4 inch SS NPT, 1.50 - 150.00 PSI range, 1 setting
Barksdale Pressure Switch, D2H-H150SS, 1/4 inch SS NPT, 1.50 - 150.00 PSI range, 2 settings


For quotes on any Barskdale part number, please use our BARKSDALE Parts Form

www.flowfactor.com