Littelfuse PC-102 Series Pump Controllers from Flow Factor
For a Quote, Click HERE!
Littelfuse PC-102CICI-DL:
Dual seal-leak detector uses inputs to sense seal failures and energize the output relay. Input logic direct or inverted is DIP switch selectable.
Littelfuse PC-102CICI-LT:
Seal-leak and over-temperature detector uses one input to sense seal failures and the temperature input to detect motor overheating. Configurable to suit various probes. Seal input logic direct or inverted, plus over-temperature trip reset automatic or manual, is DIP switch selectable.
Littelfuse PC-102 Pump Protection Controller |
Littelfuse PC-102 Description
The LIttelfuse PC-102 series is a dual-channel switch that provides dual protection against seal failures and over-temperature in submersible pumping applications.
The relays have two form-C isolated output relays and two LEDs, which illuminate when each associated output relay is energized.
The sensitivity adjustment (4.7k-100kOhms) allows you to define the input impedance at which the output relays will change state. The sensitivity for the over-temperature detector can be set to 4k Ohms with use of the DIP switches.
Littelfuse PC-102 Specifications
Input Characteristics
Frequency 50/60Hz
Functional Characteristics:
Probe Sense Voltage 5vdc pulsed
Sensitivity 4.7k-100kΩ Sensitivity (for temp) Selectable 4kΩ with DIP switches
Input Logic Direct or inverted
Debounce Time Delay 0.5 or 2 seconds
Output Characteristics:
Relay Output Rating (2 Form C isolated)
Pilot Duty 180VA @ 120VAC, C150, General Purpose 5A @ 240VAC
General Characteristics:
Temperature Range -20° to 55°C (-4° to 131°F)
Maximum Input Power 2 W
Depluggable Connector Phoenix Contact-Series MSTB plugs
Output Relay Status Indicators LEDs
Terminal Torque 4.5 in.-lbs.
Wire range 12-20 AWG
Standards Passed:
Electrostatic Discharge (ESD) IEC 61000-4-2, Level 3, 6kV contact, 8kV air.
Radio Frequency Immunity (RFI) IEC 61000-4-3, Level 3, 10V/m
Fast Transients IEC 61000-4-4, Level 3, 4kV input power 2kV inputs/outputs
Safety Marks:
UL UL508 (File #E68520)
Dimensions H 88.9 mm (3.5”); W 52.93 mm (2.08”); D 59.69 mm (2.35”)
Weight 0.9 lb. (14.4 oz., 408.23 g)
Mounting Method 35mm DIN rail or Surface Mount (#6 or #8 screws)
For a Quote, Click HERE!
Flow Factor
216-765-4231
Littelfuse...PC-102...Littelfuse...PC-102...Littelfuse...PC-102...Littelfuse...PC-102