The ASCO 8210 Solenoid valves are their most popular series and these valves are universally accepted for all general purpose solenoid valve applications.
The 8210 series ASCO solenoid valves range from 3/8 inch to 2-1/2 inch. They can be rated up to 300 PSI and there are both Normally Closed and Normally Open types. Valve bodies can be brass or stainless steel and paired with Buna-N, EPR, Viton or Teflon seals for higher temperatures or more caustic fluids. Most of the series 8210 valves require 5 PSI MINIMUM operating pressure but there are some with a ZERO minimum and can be used for draining application or closed loop applications. All of the valves are pilot operated, meaning that they use the line pressure to open or close the valve. (No pilot valve is required).
The 8210 valves can come in the most common voltages, 12, 24, 120 VDC and 24, 120, 240, 480 vac.
The below chart shows the specs for this series.
 |
| ASCO 8210 Series Solenoid Valves |
Flow Factor
866-360-9830
www.flowfactor.com
No comments:
Post a Comment