Parker 204 Series 1/8 INCH Solenoid Valves

1/8 inch round Bodied Parker 2 way and 3 way Solenoid Valves from Flow Factor

Parker 204 and 304 Series Solenoid Valves provide fluid control for food & beverage, commercial, industrial, instrumentation, transportation and HVAC markets. The 204 (2-way) and 304 (3-way) Valves have stainless steel bodies, Viton seals, 1/8" ports and have pressures from 80 - 950 psi AC voltages, 30 to 390 psi in DC voltages for the 2-way valves and 20-375 psi for the 3-way valves (AC or DC).   RoHS  CE, UL, cUL

Compatible Fluids

Lubricated Air, non-Lubricated Air, Inert Gases, Water, Petroleum Products and additional fluids compatible with the materials of construction. Pressure ratings apply to all compatible fluids within stated temperature ranges.

Optional Construction

Consult Fluid Control Division for alternate materials, alternate coil features including Class H 185oC , other voltage needs etc.

Weight including Conduit Coil:

2-way normally closed 9oz/255g 3-way normally closed 10oz/284g

AC Ambient Temperature Range

32°F (0°C) to 135°F (57°C)

DC Ambient Temperature Range

32°F (0°C) to 125°F (52°C)

AC Media Temperature Range

32°F (0°C) to 240°F (116°C)

DC Media Temperature Range

32°F (0°C) to 240°F (116°C)

NORMALLY CLOSED 2 WAY VALVES:

1/8 Ports, Viton Seals, 303 Stainless Steel Bodies, 0 Minimum Pressure

20CC02EV4   3/64 orifice, 0.06 Cv,  AC Max. Pressure 950  DC Max. Pressure390

20CC02GV4  1/16 Orifice, 0.10 Cv, AC Max Pressure 625, DC Max. Pressure 255

20CC02JV4   5/64 Orifice,  0.15 Cv, AC Max Pressure 450, DC Max Pressure 180

20CC02LV4  3/32 Orifice,  0.22 Cv, AC Max Pressure 320, DC Max Pressure 130

20CC02MV4  7/64 Orifice, 0.28 Cv, AC Max Pressure 245, DC Max Pressure 100

20CC02PV4  1/8 Orifice,  0.32 Cv, AC Max Pressure 175, DC Max Pressure 60

20CC02QV4  5/32 Orifice,  0.38 Cv, AC Max Pressure 100, DC Ma Pressure 30

Add Coils codes below for a complete Solenoid Vale Assembly.

NORMALLY OPEN 2 WAY VALVES:

1/8 Ports, Viton Seals, 303 Stainless Steel Bodies, 0 Minimum Pressure

20CF02AV4   1/32 orifice, 0.02 Cv,  AC Max. Pressure 375  DC Max. Pressure 375

20CF02EV4  3/64 Orifice, 0.06 Cv, AC Max Pressure 230, DC Max. Pressure 230

20CF02GV4   1/16 Orifice,  0.10 Cv, AC Max Pressure 150, DC Max Pressure 150

20CF02JV4   5/64 Orifice,  0.14 Cv, AC Max Pressure 105, DC Max Pressure 105

20CF02LV4   3/32 Orifice, 0.20 Cv, AC Max Pressure 80, DC Max Pressure 80

Add Coils codes below for a complete Solenoid Vale Assembly.

Encapsulated Watertight Designs. Available as Modular Coils or for Fully Assembled Valves.

Conduit Coil Coil Code: C4

Construction: - ClassF - 18” lead wires - Ground wire - 1/2” NPT conduit hub - NEMA 4X, IP65 protection AC: 10 Watts except 2 Way Normally Closed is 8.5 Watts DC: 8 Watts

C4A ~ 12vdc

C4B ~ 24 vdc

C4E ~ 24/60 AC

C4F ~ 120/60 AC

C4G ~ 240/60 AC

Leaded Coil Coil Code: B4

Construction: - ClassF - 18” lead wires - Ground wire AC: 10 Watts except 2 Way Normally Closed is 8.5 Watts DC: 8 Watts

B4A ~ 12vdc

B4B ~ 24 vdc

B4E ~ 24/60 AC

B4F ~ 120/60 AC

B4G ~ 240/60 AC

DIN Coil Coil Code: D6

Construction: - ClassH - DIN 43650A/ISO 4400 configuration - NEMA 4X, IP65 protection with a suitable plug and gasket AC: 10 Watts except 2 Way Normally Closed is 8.5 Watts DC: 8 Watts

D4A ~ 12vdc

D4B ~ 24 vdc

D4E ~ 24/60 AC

D4F ~ 120/60 AC

D4G ~ 240/60 AC

Parker 20CC02EV4C4F, 1/8 inch 2-way Valve, 0-950 psi, 120/60, NC, Nema 4
Parker 20CC02GV4C4F, 1/8 inch 2-way Valve, 0-625 psi, 120/60, NC, Nema 4
Parker 20CC02LV4C4F, 1/8 inch 2-way Valve, 0-320 psi, 120/60, NC, Nema 4
Parker 20CC02MV4C4F, 1/8 inch 2-way Valve, 0-245 psi, 120/60, NC, Nema 4
Parker 20CC02PV4C4F, 1/8 inch 2-way Valve, 0-175 psi, 120/60, NC, Nema 4
Parker 20CC02QV4C4F, 1/8 inch 2-way Valve, 0-100 psi, 120/60, NC, Nema 4

Parker 20CC02EV4C4B, 1/8 inch 2-way Valve, 0-390 psi, 24vdc, NC, Nema 4
Parker 20CC02GV4C4B, 1/8 inch 2-way Valve, 0-255 psi, 24vdc, NC, Nema 4
Parker 20CC02LV4C4B, 1/8 inch 2-way Valve, 0-130 psi, 24vdc, NC, Nema 4
Parker 20CC02MV4C4B, 1/8 inch 2-way Valve, 0-100 psi, 24vdc, NC, Nema 4
Parker 20CC02PV4C4B, 1/8 inch 2-way Valve, 0-60 psi, 24vdc, NC, Nema 4
Parker 20CC02QV4C4B, 1/8 inch 2-way Valve, 0-30 psi, 24vdc, NC, Nema 4

NEMA 7 COILS AVAILABLE FOR EXPLOSION PROOF APPLICATIONS.


WWW.FLOWFACTOR.COM

Barksdale Diaphragm Pressure Switches

Barksdale Diaphragm Pressure Switches from Flow Factor

Barksdale D1T, D2T Series

Barksdale's D1T & D2T Terminal Block Diaphragm Pressure Switches offer superior accuracy in a robust package, making them the ideal solution to your industrial pressure control needs. These switches are ideal for applications requiring water-tight, NEMA 4 housings a covered terminal strip and tamper-proof external adjustment. (Factory set models are also available.) With pressure ranges up to 150 psi, these housed diaphragm pressure switches are suitable for use in either positive pressure or vacuum applications. Single-and dual-circuit models are available. Housed models feature a durable, anodized aluminum enclosure. For applications requiring a highly accurate switch in a durable package, Barksdale's D1T & D2T Terminal Block Diaphragm Pressure Switches are the ideal choice.

Terminal Block Diaphragm Switch by Barksdale

NEMA 4 Housing with terminal strip, tamper-proof external adjustment, up to 150 psi.

Single and Dual Terminal Block Diaphragm

Applications

▪   Machine tools

▪   Pneumatics

▪   Medical

▪   Marine & shipbuilding

▪   Pump & compressor monitoring

▪   Oil & gas

▪   Water equipment

▪   Mining

▪   Lubrication equipment

Features

▪   High reliability

▪   High accuracy

▪   NEMA 4

▪   Ideal for pressure and vacuum applications

▪   Single and dual switching capability

▪   Tamper-proof external adjustment

Diaphragm Seal Option Available

Barksdale Pressure Switch, D1T-H2SS, 1/4 inch SS NPT, .02 - 1.70 PSI range, 1 Setting

Barksdale Pressure Switch, D2T-H2SS, 1/4 inch SS NPT, .02 - 1.70 PSI range, 2 Settings
Barksdale Pressure Switch, D1T-A3SS, 1/4 inch SS NPT, .03 - 3.00 PSI range,1 Setting
Barksdale Pressure Switch, D2T-A3SS, 1/4 inch SS NPT, .03 - 3.00 PSI range, 2 Settings
Barksdale Pressure Switch, D1T-H18SS, 1/4 inch SS NPT, .40 - 18.00 PSI range, 1 Setting
Barksdale Pressure Switch, D2T-H18SS, 1/4 inch SS NPT, .40 - 18.00 PSI range, 2 Settings
Barksdale Pressure Switch, D1T-A80SS, 1/4 inch SS NPT, .50 - 80.00 PSI range, 1 Setting
Barksdale Pressure Switch, D2T-A80SS, 1/4 inch SS NPT, .50 - 80.00 PSI range, 2 Settings
Barksdale Pressure Switch, D1T-H150SS, 1/4 inch SS NPT, 1.50 - 150.00 PSI range, 1 Setting
Barksdale Pressure Switch, D2T-H150SS, 1/4 inch SS NPT, 1.50 - 150.00 PSI range, 2 Settings

Barksdale D1S, D2S, D1H, D2H Series

Barksdale's Diaphragm Pressure Switches offer superior accuracy in a robust package, making them the ideal solution to your industrial pressure control needs. Diaphragm switches are ideal for applications demanding instrument class accuracy and where pressure pulsations are less than 25 cycles per minute. Available in various pressure ranges up to 150 psi, diaphragm switches are suitable for use in either positive pressure or vacuum applications. Single, and dual, and triple circuit models are available. Housed models (D1H & D2H) feature a durable, anodized aluminum enclosure with an integrated 1/2" NPT conduit connector, a tamper-resistant cover for the setpoint adjustment screws, and are rated to NEMA 4 as a standard.  For applications requiring a highly accurate switch in a durable package, Barksdale's Diaphragm Pressure Switches are the ideal choice.

Stripped & Housed Diaphragm Switches by Barksdale

Barksdale D1S, D2S Series

Stripped, suitable for control box installations with adjustments up to 150 psi.

Barksdale D1H, D2H, D3H Series

NEMA 4 Housing, tamper-proof external adjustment, up to 150 psi.

Applications

▪   Pump & compressor monitoring

▪   Engine monitoring

▪   Machine tools

▪   Hydraulic power units

▪   Medical equipment

▪   Waste management

▪   Food & beverage

▪   Factory automation

    Metal working

Features

▪   Stripped and housed versions available

▪   High accuracy

▪   Ideal for pressure or vacuum

▪   Easy setpoint adjustment

▪   NEMA 4 (Housed Models)

▪   Up to 3 setpoints available in one switch

    Diaphragm Seal Option Available

Barksdale Pressure Switch, D1H-H2SS, 1/4 inch SS NPT, .02 - 1.70 PSI range, 1 setting

Barksdale Pressure Switch, D2H-H2SS, 1/4 inch SS NPT, .02 - 1.70 PSI range, 2 settings

Barksdale Pressure Switch, D1H-A3SS, 1/4 inch SS NPT, .03 - 3.00 PSI range, 1 setting

Barksdale Pressure Switch, D2H-A3SS, 1/4 inch SS NPT, .03 - 3.00 PSI range, 2 settings
Barksdale Pressure Switch, D1H-H18SS, 1/4 inch SS NPT, .40 - 18.00 PSI range, 1 setting
Barksdale Pressure Switch, D2H-H18SS, 1/4 inch SS NPT, .40 - 18.00 PSI range, 2 settings
Barksdale Pressure Switch, D1H-A80SS, 1/4 inch SS NPT, .50 - 80.00 PSI range, 1 setting
Barksdale Pressure Switch, D2H-A80SS, 1/4 inch SS NPT, .50 - 80.00 PSI range, 2 settings
Barksdale Pressure Switch, D1H-H150SS, 1/4 inch SS NPT, 1.50 - 150.00 PSI range, 1 setting
Barksdale Pressure Switch, D2H-H150SS, 1/4 inch SS NPT, 1.50 - 150.00 PSI range, 2 settings


For quotes on any Barskdale part number, please use our BARKSDALE Parts Form

www.flowfactor.com

Watlow FIREBAR 1.25 Screw Plug Immersion Heaters

Fire Bar Screw Plug Immersion Heaters by Watlow and Flow Factor

Watlow FIREBAR 1.25 inch Screw Plug Immersion heaters (BDNF Series) for heating Process water. The screw plug is made of 304 Stainless Steel and the element is made of Alloy 800. The watt density is about 45 watts per square inch.

Available with a General Purpose Housing (NEMA 1) or Moisture/Explosion resistant housing (NEMA 4/7). 

Also available with integral thermostats in two ranges 60-250 or 100-550 degrees F.

The FIREBAR has a few advantages over a tubular element.

The FIREBAR element has three resistant wires and thus can be wired in single or three phase with only a single element.

The FIREBAR element has lower watt density for the same length of immersion, or put another way it can have higher wattage with less immersion depth.

The FIREBAR design has better heat transfer due to the design of the element than the round tubular element, it creates more surface area within the medium.

Call Flow Factor for more information or to order.  216-765-4231

Email to info@flowfactor.com

www.flowfactor.com

Watlow Screw Plug Immersion Heaters - 2 1/2 Inch Plugs

Flow Factor sells Watlow Screw Plug Immersion Heaters


Watlow is a world leader in the manufacture of Electric heating elements.  Immersion heaters are made with electric elements with a fitting so that the heater can protrude though the tank wall for direct immersion into the liquid or medium being heated.  The elements can be made of Copper, Stainless Steel, Steel or Alloy 800 (a nickel enriched metal).  Watlow uses Alloy 800 for the majority of their heaters and Stainless for specific types of liquids like DI Water.  With the cost of copper skyrocketing, Watlow has discontinued its' use.  n this blog are the most common size of screw plug heater the 2 1/2 inch size.  2.5 inch screw plug are popular since a bundle of three elements can be used along with a thermowell.  The common voltages are 240 and 480 in either 1 phase or 3 phase, three phase being more common due to the lower amp draw and the widespread use of 480 within USA manufacturing facilities.

Heaters in this blog are designed for use with water or liquids similar in viscosity of water.  Oils and other more viscous materials will need different wattages and materials of construction than these water heaters.

Watlow's BLN (3 elements) series Screw Plug Immersion heaters are for CLEAN water have a 2 1/2 inch NPT(M) Stainless Steel Screw Plug and nickel alloy 800 electric heating elements. The Watt Density is between 59 and 61 and total wattages from 2 to 18 kilowatts (KW). Voltages come in 120 single phase or 240 and 480 three phase with General Purpose (NEMA 1) enclosure. The units with the built in Thermostat have a range of 30-110F, 60-250F or 100-550F.  Please note that running the elements dry will cause them to burn out.  Use a low water cut off or liquid level control to protect the heating elements.

Watlow BLN77L1S, Immersion Heater, 3 kw, 120 VAC/1 phase, Alloy 800 Elements

Watlow BLN77L3S4, Immersion Heater, 3 kw, 240 VAC/1 ph, Alloy 800 Elements, 30-110 Tstat

Watlow BLN77L13S7A, Immersion Heater, 3 kw, 480 VAC/1 ph, Alloy 800 Elements, 100-550 Tstat

Watlow BLN710L1S, Immersion Heater, 4.5 kw, 120 VAC/1 phase, Alloy 800 Elements

Watlow BLN710L3S4, Immersion Heater, 4.5 kw, 240 VAC/1 ph, Alloy 800 Elements, 30-110 Tstat

Watlow BLN610K13S7A, Immersion Heater, 4.5 kw, 480 VAC/1 ph, Alloy 800 Elements, 100-550 Tstat

Watlow BLN720L3S, Immersion Heater, 9 kw, 240 VAC/3 phase, Alloy 800 Elements

Watlow BLN720L3S4, Immersion Heater, 9 kw, 240 VAC/1 ph, Alloy 800 Elements, 30-110 Tstat

Watlow BLN726C5S, Immersion Heater, 12 kw, 480 VAC/3 phase, Alloy 800 Elements

Watlow BLNF15C3S, Immersion Heater, 15 kw, 240 VAC/3 phase, Alloy 800 Elements

Watlow BLNF28L5S, Immersion Heater, 32 kw, 480 VAC/3 phase, Alloy 800 Elements


Watlow's BLN (3 elements) series Screw Plug Immersion heaters are for CLEAN water have a 2 1/2 inch NPT(M) Stainless Steel Screw Plug and nickel alloy 800 electric heating elements. The Watt Density is between 59 and 61 and total wattages from 2 to 18 kilowatts (KW). Voltages come in 120 single phase or 240 and 480 three phase with Moisture Resistant/Explosion resistant (NEMA 4 & 7) enclosure. The units with the built in Thermostat have a range of 30-110F, 60-250F or 100-550F.  Please note that running the elements dry will cause them to burn out.  Use a low water cut off or liquid level control to protect the heating elements.

Watlow BLN77L1C, Immersion Heater, 3 kw, 120 VAC/1 phase, Alloy 800 Elements

Watlow BLN77L3C4, Immersion Heater, 3 kw, 240 VAC/3 phase, Alloy 800 Elements, 30-110 Tstat

Watlow BLN77L13C7A, Immersion Heater, 3 kw, 480 VAC/3 phase, Alloy 800 Elements, 100-550 Tstat

Watlow BLN710L1C, Immersion Heater, 4.5 kw, 120 VAC/1 phase, Alloy 800 Elements

Watlow BLN710L3C4, Immersion Heater, 4.5 kw, 240 VAC/3 phase, Alloy 800 Elements, 30-110 Tstat

Watlow BLN610K13C7A, Immersion Heater, 4.5 kw, 480 VAC/3 phase, Alloy 800 Elements, 100-550 Tstat

Watlow BLN720L3C, Immersion Heater, 9 kw, 240 VAC/3 phase, Alloy 800 Elements

Watlow BLN720L3C4, Immersion Heater, 9 kw, 240 VAC/3 phase, Alloy 800 Elements, 30-110 Tstat

Watlow BLN720L5C, Immersion Heater, 9 kw, 480 VAC/3 phase, Alloy 800 Elements

Watlow BLN726C5C, Immersion Heater, 12 kw, 480 VAC/3 phase, Alloy 800 Elements

Watlow BLNF15C3C, Immersion Heater, 15 kw, 240 VAC/3 phase, Alloy 800 Elements

Watlow BLNF28L5C, Immersion Heater, 32 kw, 480 VAC/3 phase, Alloy 800 Elements

These BLN (3 elements) series Watlow Screw Plug Immersion heaters for PROCESS water or solution water have a 2 1/2 inch NPT(M) Stainless Steel Screw Plug and nickel alloy 800 electric heating elements. The Watt Density is between 47 and 49 and total wattages from 2 to 18 kilowatts (KW). Voltages come in 120 single phase or 240 and 480 three phase with General Purpose (NEMA 1) enclosure. The units with the built in Thermostat have a range of 30-110F, 60-250F or 100-550F. Use of a liquid level control is recommended to protect the heating elements from "running dry"!  The use of a contactor may also be required to switch a high amp load.

Watlow BLN79G3S, Immersion Heater, 3 kw, 240 VAC/3 phase, Alloy 800 Elements

Watlow BLN79G3S5A, Immersion Heater, 3 kw, 240 VAC/1 ph, Alloy 800 Elements, 60-250 Tstat

Watlow BLN79G5S4, Immersion Heater, 3 kw, 480 VAC/1 ph, Alloy 800 Elements, 30-110 Tstat

Watlow BLN712R1S, Immersion Heater, 4.5 kw, 120 VAC/1 phase, Alloy 800 Elements

Watlow BLN712R3S5A, Immersion Heater, 4.5 kw, 240 VAC/1 ph, Alloy 800 Elements, 60-250 Tstat

Watlow BLN712R5S7A, Immersion Heater, 4.5 kw, 480 VAC/1 ph, Alloy 800 Elements, 100-550 Tstat

Watlow BLN719R3S4, Immersion Heater, 7.5 kw, 240 VAC/1 ph, Alloy 800 Elements, 30-110 Tstat

Watlow BLN719R5S, Immersion Heater, 7.5 kw, 480 VAC/3 phase, Alloy 800 Elements

Watlow BLN724R3S7A, Immersion Heater, 9 kw, 240 VAC/1 ph, Alloy 800 Elements, 100-550 Tstat

Watlow BLN724R5S, Immersion Heater, 9 kw, 480 VAC/3 phase, Alloy 800 Elements

Watlow BLN739R5S, Immersion Heater, 15 kw, 480 VAC/3 phase, Alloy 800 Elements

Watlow BLN747G5S, Immersion Heater, 18 kw, 480 VAC/3 phase, Alloy 800 Elements

Watlow Heater Cmpany BLN (3 elements) series Screw Plug Immersion heaters for PROCESS water have a 2 1/2 inch NPT(M) Stainless Steel Screw Plug and nickel alloy 800 electric heating elements. The Watt Density is between 47 and 49 and total wattages from 2 to 18 kilowatts (KW). Voltages come in 120 single phase or 240 and 480 three phase with Moisture Resistant/Explosion resistant (NEMA 4 & 7) enclosure. The units with the built in Thermostat have a range of 30-110F, 60-250F or 100-550F. Liquid level controls should be used to protect the heater from turning on with no liquid present.  Call Flow Factor for Explosion Proof Level control.  

Watlow BLN79G1C, Immersion Heater, 3 kw, 120 VAC/1 phase, Alloy 800 Elements

Watlow BLN79G3C5A, Immersion Heater, 3 kw, 240 VAC/3 phase, Alloy 800 Elements, 60-250 Tstat

Watlow BLN79G5C7A, Immersion Heater, 3 kw, 480 VAC/3 phase, Alloy 800 Elements, 100-550 Tstat

Watlow BLN717G3C, Immersion Heater, 6 kw, 240 VAC/3 phase, Alloy 800 Elements

Watlow BLN717G3C7A, Immersion Heater, 6 kw, 240 VAC/3 phase, Alloy 800 Elements, 100-550 Tstat

Watlow BLN717G5C5A, Immersion Heater, 6 kw, 480 VAC/3 phase, Alloy 800 Elements, 60-250 Tstat

Watlow BLN719R3C7A, Immersion Heater, 7.5 kw, 240 VAC/3 phase, Alloy 800 Elements, 100-550 Tstat

Watlow BLN724R3C, Immersion Heater, 9 kw, 240 VAC/3 phase, Alloy 800 Elements

Watlow BLN724R3C7A, Immersion Heater, 9 kw, 240 VAC/3 phase, Alloy 800 Elements, 100-550 Tstat

Watlow BLN724R5C, Immersion Heater, 9 kw, 480 VAC/3 phase, Alloy 800 Elements

Watlow BLN732G5C, Immersion Heater, 12 kw, 480 VAC/3 phase, Alloy 800 Elements

Watlow BLN739R5C, Immersion Heater, 15 kw, 480 VAC/3 phase, Alloy 800 Elements

Watlow BLN747G5C, Immersion Heater, 18 kw, 480 VAC/3 phase, Alloy 800 Elements

Watlow's BLR (3 elements) series Screw Plug Immersion heaters for DI OR DEMINERALIZED water have a 2 1/2 inch NPT(M) Stainless Steel Screw Plug and STAINLESS STEEL electric heating elements. The Watt Density is between 59 and 61 and total wattages from 2 to 18 kilowatts (KW). Voltages come in 120 single phase or 240 and 480 three phase with General Purpose (NEMA 1) enclosure. The units with the built in Thermostat have a range of 30-110F, 60-250F or 100-550F. Liquid Level control is important to protect the elements from burning up in dry air.  Over Temperature limits are also a good idea.

Watlow BLR77L1S, Immersion Heater, 3 kw, 120 VAC/1 phase, Stainless Steel Elements

Watlow BLR77L3S4, Immersion Heater, 3 kw, 240 VAC/1 ph, Stainless Steel Elements, 30-110 Tstat

Watlow BLR77L5S5A, Immersion Heater, 3 kw, 480 VAC/1 ph, Stainless Steel Elements, 60-250 Tstat

Watlow BLR710L5S, Immersion Heater, 4.5 kw, 480 VAC/3 phase, Stainless Steel Elements

Watlow BLR714L3S4, Immersion Heater, 6 kw, 240 VAC/1 ph, Stainless Steel Elements, 30-110 Tstat

Watlow BLR714L5S5A, Immersion Heater, 6 kw, 480 VAC/1 ph, Stainless Steel Elements, 60-250 Thermostat

Watlow BLR717L3S4, Immersion Heater, 7.5 kw, 240 VAC/1 ph, Stainless Steel Elements, 30-110 Thermostat

Watlow BLR717L5S, Immersion Heater, 7.5 kw, 480 VAC/3 phase, Stainless Steel Elements

Watlow BLR720L3S4, Immersion Heater, 9 kw, 240 VAC/1 ph, Stainless Steel Elements, 30-110 Thermostat

Watlow BLR720L3S7A, Immersion Heater, 9 kw, 240 VAC/1 ph, Stainless Steel Elements, 100-550 Thermostat

Watlow BLR726C5S, Immersion Heater, 12 kw, 480 VAC/3 phase, Stainless Steel Elements

Watlow BLR731L5S, Immersion Heater, 15 kw, 480 VAC/3 phase, Stainless Steel Elements

Watlow BLR737C5S, Immersion Heater, 18 kw, 480 VAC/3 phase, Stainless Steel Elements

Watlow's BLR (3 elements) series Screw Plug Immersion heaters for DI OR DEMINERALIZED water have a 2 1/2 inch NPT(M) Stainless Steel Screw Plug and nickel alloy 800 electric heating elements. The Watt Density is between 59 and 61 and total wattages from 2 to 18 kilowatts (KW). Voltages come in 120 single phase or 240 and 480 three phase with Moisture Resistant/Explosion resistant (NEMA 4 & 7) enclosure. The units with the built in Thermostat have a range of 30-110F, 60-250F or 100-550F.

Watlow BLR77L1C, Immersion Heater, 3 kw, 120 VAC/1 phase, Stainless Steel Elements, Ex. Proof

Watlow BLR77L3C4, Immersion Heater, 3 kw, 240 VAC/3 phase, Stainless Steel Elements, 30-110 Thermostat

Watlow BLR77L5C7A, Immersion Heater, 3 kw, 480 VAC/3 phase, Stainless Steel Elements, 100-550 Thermostat

Watlow BLR710L3C, Immersion Heater, 4.5 kw, 240 VAC/3 phase, Stainless Steel Elements, Ex. Proof

Watlow BLR710L3C7A, Immersion Heater, 4.5 kw, 240 VAC/3 ph, Stainless Steel Elements, 100-550 Thermostat

Watlow BLR710L5C5A, Immersion Heater, 4.5 kw, 480 VAC/3 ph, Stainless Steel Elements, 60-250 Thermostat

Watlow BLR714L5C4, Immersion Heater, 6 kw, 480 VAC/3 phase, Stainless Steel Elements, 30-110 Thermostat

Watlow BLR717L3C, Immersion Heater, 7.5 kw, 240 VAC/3 phase, Stainless Steel Elements, Ex. Proof

Watlow BLR717L5C, Immersion Heater, 7.5 kw, 480 VAC/3 phase, Stainless Steel Elements, Ex. Proof

Watlow BLR720L3C5A, Immersion Heater, 9 kw, 240 VAC/3 phase, Stainless Steel Elements, 60-250 Thermostat

Watlow BLR720L5C, Immersion Heater, 9 kw, 480 VAC/3 phase, Stainless Steel Elements, Ex. Proof

Watlow BLR726C5C, Immersion Heater, 12 kw, 480 VAC/3 phase, Stainless Steel Elements, Explosion Proof Housing

Watlow BLR731L5C, Immersion Heater, 15 kw, 480 VAC/3 phase, Stainless Steel Elements, Explosion Proof


Watlow BLR737C5C, Immersion Heater, 18 kw, 480 VAC/3 phase, Stainless Steel Elements, Explosion Proof Housing




www.flowfactor.com
866-360-9830