Watlow FIREBAR® Heaters from Flow Factor

FIREBAR® Single/Double-Ended Heaters by Watlow

Get a Quote HERE!

Watlow FIREBAR heating elements provide added heating performance over standard round tubular heating elements—especially for immersion applications in petroleum-based liquids requiring high kilowatts. 

The FIREBAR's unique flat surface geometry packs more power in shorter elements and assemblies, along with a host of other performance improvements. These include:

-Minimizing coking and fluid degrading

-Enhancing the flow of fluid past the element's surface to carry heat from the sheath

-Improving heat transfer with a significantly larger boundary layer allowing much more liquid     to flow up and across the sheath's surface

Watlow FIREBAR elements are available in single- and double-ended constructions with one inch or 5⁄8 inch heights. These two configuration variables make it possible to use FIREBAR elements instead of round tubular elements in virtually all applications.

70 percent greater surface area per linear inch compared to a 0.430 in. (11 mm) diameter round tubular heater

Compacted MgO insulation maximizes thermal conductivity and dielectric strength

Precision wound nickel-chromium resistance wires

0.040 in. (1 mm) thick MgO walls transfer heat more efficiently

Three resistance coil design readily adapts to a variety of electrical sources and wattages outputs

Get a Quote HERE!

Flow Factor

216-765-4231

www.flowfactor.com

Watlow Over-The-Side Immersion Heaters

Flow Factor and Over-The-Side Immersion Heaters

Contact Flow Factor HERE!

L and O Shaped Immersion Heaters

Over-The-Side immersion heaters are ideal for heating water, Oils and solvents, salts and acids. These Immersion heaters provide application versatility with optional sheath materials, kilowatt (KW) ratings, terminal enclosures and mounting methods.  Voltages are can be 120, 240 or 480 and KW ratings from 3 to 18.  (Specials could be made as well.)

The Over-The-Side L and O shaped Immersion "install from the top" heaters slide easily into tanks, with the heated portion immersed along the side or bottom. The O-T-S immersion heaters can come equipped with integral thermostats, thermal wells and sensors if needed for temperature control or monitoring. Sludge legs can be added as well to keep the bottom style heaters above the tank bottom. The heater riser can be up to 60 feet if necessary, common riser height is 39 and 51 inches.

Applications are:
Water Heating
Freeze Protection
Viscous oils
Storage Tanks
Degreasing Tanks
Solvents
Salts
Caustic Solutions
Parafin

Standard L shaped 240 volt part numbers are:

OLN714L3W  3 KW 48 Watt Density
OLN722L3W  6 KW 48 Watt Density
OLN730C3W  9 KW 48 Watt Density
OLN737L3W  12 KW 48 Watt Density
OLN745C3W  15 KW 48 Watt Density
OLN752L3W  18 KW 48 Watt Density
OLNA22L3W  3 KW  23 Watt Density
OLNA37L3W  6 KW  23 Watt Density
OLNA52L3W  9 KW  23 Watt Density
OLS722L3W   3 KW  23 Watt Density
OLS737L3W   6 KW  23 Watt Density
OLS752L3W   9 KW  23 Watt Density

Standard L shaped 480 volt part numbers are:

OLN714L13W  3 KW  48 Watt Density
OLN722L5W    6 KW  48 Watt Density
OLN730C5W    9 KW  48 Watt Density
OLN737L5W  12 KW  48 Watt Density
OLN745C5W  15 KW  48 Watt Density
OLN752L5W  18 KW  48 Watt Density
OLNA22L5W  3 KW   23 Watt Density
OLNA37L5W  6 KW  23 Watt Density
OLNA52L5W  9 KW  23 Watt Density
OLS722L5W   3 KW   23 Watt Density
OLS737L5W   6 KW   23 Watt Density
OLS752L5W   9 KW   23 Watt Density

Over-The-Side Immersion Heaters - L and O Shaped

Standard O shaped 240 volt part numbers are:

ORN710N3W  3 KW 48 Watt Density
ORN713J3W  6 KW 48 Watt Density
ORN716A3W  9 KW 48 Watt Density
ORN718J3W  12 KW 48 Watt Density
ORN721E3W  15 KW 48 Watt Density
ORN723J3W  18 KW 48 Watt Density
ORNA13J3W  3 KW  23 Watt Density
ORNA18J3W  6 KW  23 Watt Density
ORNA23J3W  9 KW  23 Watt Density
ORS713J3W   3 KW  23 Watt Density
ORS718J3W   6 KW  23 Watt Density
ORS723J3W   9 KW  23 Watt Density

Standard O shaped 480 volt part numbers are:

ORN710N13W  3 KW 48 Watt Density
ORN713J5W  6 KW 48 Watt Density
ORN716A5W  9 KW 48 Watt Density
ORN718J5W  12 KW 48 Watt Density
ORN721E5W  15 KW 48 Watt Density
ORN723J5W  18 KW 48 Watt Density
ORNA13J5W  3 KW  23 Watt Density
ORNA18J5W  6 KW  23 Watt Density
ORNA23J5W  9 KW  23 Watt Density
ORS713J5W   3 KW  23 Watt Density
ORS718J5W   6 KW  23 Watt Density
ORS723J5W   9 KW  23 Watt Density

Please use our Parts Form HERE for a quote/


FLOW FACTOR
216-765-4231
www.flowfactor.com