Penberthy Jet Pump for Oil Separation

Flow Factor can offer a Penberthy Jet pump for Oil Separation Processes

Penberthy educators may be used in oil/water separation processes to purify water prior to release.  A recirculation pump is used with the educator to pull air or gas into impure water.  The air or gas then bonds with oil, forming a frothy top layer.  This froth may then be skimmed off.

This application requires the air to be finely divided.  The most common units used are Penberthy Model LH, LM or ELL eductors, based on motive pressure and discharge pressure.

Call for pricing or application help at 216-765-4231.
email to info@flowfactor.com
www.flowfactor.com

Barksdale Diaphragm Pressure Switches with Terminal Box

Flow Factor sells Barksdale Mechanical Diaphragm pressure Switches - Model D1T/D2T



Barksdale D1T and D2T pressure switches come in 5 different ranges:
0 -1.7 PSI
.03 - 3 PSI
.4 - 18 PSI
.5 - 80 PSI
1.5 - 150 PSI

Mechanical Pressure switches are most accurate in the middle of their range and can be 10-15% accuracy  at the ends of the range. Pick a switch where your set point is in the middle of the range.

The Barksdale D1T and D2T switches have 10 amp relays and are SPDT.
These mechanical switches are highly reliable and can withstand many years of industrial use.

The pressure switches are UL and CSA approved.

There are many different models and the catalog cut sheet can be seen HERE.

The D1T switch is a single stage switch and the D2T is a two stage switch that can be set with 2 set points; a low and a high for example.

Most common models are:

D1T-H2SS
D2T-H2SS
D1T-A3SS
D2T-A3SS
D1T-H18SS
D2T-H18SS
D1T-A80SS
D2T-A80SS
D1T-H150SS
D2T-H150SS

Flow Factor
866-360-9830

Flow Factor Stocks Parker Jackes Evans Solenoid Valves

Flow Factor Stocks Parker Premier Water and Steam Valves for quick delivery

The below Parker parts tend to be in stock for immediate shipment.

Water    Steam/Water   Steam
GP200    GP207         GP257    1/4 inch valves
GP300    GP307         GP357    3/8 inch valves
GP400    GP407         GP457    1/2 inch valves
GP600    GP607         GP657    3/4 inch valves
GP10A    GP1007       GP1057   1  inch valves

Coils in stock

PARKER GP23 coil, 24 VAC for Parker GP valves

PARKER GP23 coil, 120 VAC for Parker GP valves

PARKER GP23 coil, 120/240 VAC for Parker GP valves

PARKER GP23 coil, 480 VAC for Parker GP valves

GP Kits in stock

Parker Repair Kit for GP 207 valve.

Kit part number is 76724

Parker Repair Kit for GP 307 valve.

Kit part number is 76728

Parker Repair Kit for GP 407 valve.

Kit part number is 76728

Parker Repair Kit for GP 607 valve.

Kit part number is 76732

www.flowfactor.com
866-360-9830

1330 Combustion Valves by Jefferson

Flow Factor Sells Jefferson 1330 Combustion Valves for Commercial and Industrial uses.

Jefferson Valves manufactures a full line of solenoid valves, including 2, 3 and 4 way valves, valves for general purpose applications, air cylinder operation, draining, filling and for gas burner operation.

The Jefferson 1330 series come in either direct acting or pilot operated valves. Direct acting valves have a 0 minimum pressure requirements. The Jefferson 1330 series comes in sizes from 1/2 inch NPT to 1 inch NPT.  Pressure ranges are 0-15 psi.  The standard coil is a DIN coil which is weather resistant and the leaded coils that are either NEMA 4 (YC) or NEMA 7 (ZC).

Listed below are a few of the 1330 series valves and links to the website.

Jefferson 1330LA04T 120/60 
1/2" NPT, NC, 3 psi air/gas

Jefferson Valve YC1330LA06T  
120 vac, 3/4" NPT, NC, 3 psi air/gas  with NEMA 4 coil housing

Jefferson Valve ZC1330LA08T
120 vac, 1" NPT, NC, 3 psi air/gas with NEMA 7 coil housing

Jefferson Valve YC1330LA04T 24/60
24 vac, 1/2" NPT, NC, 3 psi air/gas with NEMA 4 Coil enclosure

Jefferson Combustion Valve 1330LA06T
24 vac, 3/4" NPT, NC, 3 psi air/gas with DIN style coil

Jefferson Valve Part number ZC1330LA08T
24 vac, 1" NPT, NC, 3 psi air/gas with NEMA 7 Explosion-Proof enclosure

Jefferson Valve Combustion valve coil ZC1330LA04T
24 VDC, 1/2" NPT, NC, 3 psi air with NEMA 7 Explosion Proof housing

Jefferson Valve Part number YC1330LA06T
24 VDC, 3/4" NPT, NC, 3 psi air/gas and NEMA 4 coil enclosure

Jefferson Valve Part number 1330LA08T
24 VDC, 1" NPT, NC, 3 psi air/gas with DIN style coil

To get a quote, please use the Flow Factor Solenoid Valve parts form HERE


Combustion valves are used with Air heaters, Industrial ovens, furnaces, kilns, autoclaves and other natural gas or propane fueled equipment.

Autonics Temperature Controllers Type TC4 - 72x72 mm

Flow Factor sells Autonics Temperature Controllers

Autonics TC4 controllers are inexpensive digital temperature controllers. Below are 24 volt controllers in the 72x72 mm panel cutout size.  Unit can usually be shipped with 24 hours of an order.

For a complete list of our 24 volt controllers, click HERE.


Autonics TC4S-N2R Digital Temperature Control, 1/16 DIN, PID or On/Off Control, 3 amp Relay Output or12vdc SOLID STATE DRIVER Output, Type J, K or L Thermocouple Sensor input or 100 Ohm RTD Sensor Input, 24v AC/DC. 4 Digit Digital Display

Autonics TC4S-12R Digital Temperature Control, 1/16 DIN, PID or On/Off Control, 3 amp Relay Output or12vdc SOLID STATE DRIVER Output, 1 Alarm Output, Type J, K or L Thermocouple Sensor input or 100 Ohm RTD Sensor Input, 24v AC/DC. 4 Digit Digital Display

Autonics TC4S-22R Digital Temperature Control, 1/16 DIN, PID or On/Off Control, 3 amp Relay Output or12vdc SOLID STATE DRIVER Output, 2 Alarm Outputs Type J, K or L Thermocouple Sensor input or 100 Ohm RTD Sensor Input, 24v AC/DC. 4 Digit Digital Display

Autonics TC4M-N2R Digital Temperature Control, 72x72 mm, PID or On/Off Control, 3 amp Relay Output or12vdc SOLID STATE DRIVER Output, Type J, K or L Thermocouple Sensor input or 100 Ohm RTD Sensor Input, 24v AC/DC. 4 Digit Digital Display

Autonics TC4M-12R Digital Temperature Control, 72x72 mm, PID or On/Off Control, 3 amp Relay Output or12vdc SOLID STATE DRIVER Output, 1 Alarm Output, Type J, K or L Thermocouple Sensor input or 100 Ohm RTD Sensor Input, 24v AC/DC. 4 Digit Digital Display

Autonics TC4M-22R Digital Temperature Control, 72x72 mm, PID or On/Off Control, 3 amp Relay Output or12vdc SOLID STATE DRIVER Output, 2 Alarm Outputs Type J, K or L Thermocouple Sensor input or 100 Ohm RTD Sensor Input, 24v AC/DC. 4 Digit Digital Display


Contact Flow Factor HERE.

Flow Factor Line Card

Flow Factor Line Card

Click to Contact Flow Factor

American Meter Gas Meters

Ametek Gauges

Ariston Mini-tank Water Heaters

Armstrong Pumps

ASCO Solenoid Valves

Barksdale Pressure and Temperature Switches

Barnes Pumps

BelGas Gas Regulators

Bosch Tankless Water Heaters

Carlo Gavazzi Level Switches

Chromalox Immersion Heaters

Co-Ax Valves

Carlon Water Meters

Elster Gas Meters

Fenwal Temperature Switches

Jefferson Solenoid Valves

MDI Float Level Switches

Parker Skinner Solenoid Valves

Parker Premier Aftermarket Water and Steam Valves

Penberthy Jet (eductors) Pumps

Penberthy Site Flows

Process Technology Immersion Heaters

See-Flo Flow Meters by ERDCO

Snap-Tite Valves

SSAC Conductive Level Systems

Watlow Immersion Heaters

To request a Quote please email us at info@flowfactor.com or call 866-360-9830

www.flowfactor.com

Flow Factor
Cleveland, Ohio USA
216-765-4231

Elster American Meter Rabo Meters

Elster Rotary RABO Meters from American Meter from Flow Factor

Buy American Meter RABO Meters HERE!

Ask for Quote Here!

Elster Gas is pleased to announce the introduction of their RABO rotary meter into the North American market.
Elster American Meter Company LLC will market the new product bearing the Elster Instromet badge, which positions it as a global product for universal application. The RABO meter will come in four meter sizes ranging from 3,500 ACFH to 14,000 ACFH maximum capacities with a pressure rating of 290 PSIG, and boasts superior performance. Finished inventory will be carried in Nebraska City, NE, starting August 15, 2014, to better serve customer demand.
Elster American Meter’s current RPM rotary meter product line will remain in production through 2015 to facilitate the customer approval process and help ensure a smooth transition to the RABO product line.

Elster Instromet has combined tried and tested product features of their RVG

and IRM rotary meter product lines with new developments into a single product. The new RABO offers a feature set that meets virtually all market applications in one simple design. Rotary-All-By-One, simply, all-in-one!

Elster AMCO RABO Meter

Features
• 4 meter sizes
• 3,500 to 14,000 acfh Maximum Capacity
• 2", 3" and 4" ANSI 125/150 flanged connections
• High rangeability across the flow range
• Low pressure drop
• Differential pressure taps on inlet and outlet with Pete’s Plugs® • Non-lubricated and non-resettable index
• End view, rotatable index
• Heavy duty, compact design
• High impact-resistant, ultraviolet stabilized index cover
• Anodized extruded aluminum body and impellers
• Anodized forged aluminum case covers
• Permanently lubricated bearings

• 10ft3 output on all meter sizes

General Information
• MAOP 290 psig
• Temperature range -40 F to +140 F
• Meets ANSI B109.3 (pending)
• Approvals pursuant to MID/PED/ATEX directives

• Media: dry natural gas, noncorrosive industrial gases

Options
• Pulse outputs
• Thermowell
• Index masking
• Gasket strainers
• Flange bolts and gaskets
• AMR mounting

• Differential pressure gauge kit

Operating Principle

General Information
• MAOP 290 psig
• Temperature range -40 F to +140 F
• Meets ANSI B109.3 (pending)
• Approvals pursuant to MID/PED/ATEX directives
• Media: dry natural gas, noncorrosive industrial gases Options
• Pulse outputs
• Thermowell
• Index masking
• Gasket strainers
• Flange bolts and gaskets
• AMR mounting
• Differential pressure gauge kit

The RABO meter utilizes the rotary-type positive displacement principle of operation which makes volumetric measurements by displacing finite volumes of gas. The positive displacement occurs within a cavity formed between the meter’s internal housing and its rotating impellers. The counter-rotating “figure-8” impellers turn as a result of pressure drop across the meter’s inlet and outlet created as downstream gas is consumed. The rotating impellers separate the flowing gas into small, finite, volumes and are counted using a mechanical index. 

Pulse Outputs
Elster RABO flow meters come equipped with a drive magnet as standard equipment for easy adaptability of a low frequency pulse generator. The pulse generators are attachable to the exterior of the index cover, and can be retrofitted or changed without opening the index. They also have sealing capability to visually detect tampering.

Model Description

10. IN-S10  8' cable
    
11. IN-S11  1 connector
    
12. IN-S12  2 connectors
    

All models include 2 independent switches and a tamper circuit. Pulse value is 10 acf (0.28 x am3) for all meter sizes.

IN-S11 and IN-S12 come with mating connector, no cable included.

Gaskets, Strainers, Bolts
Gaskets and bolts are necessary for mounting a meter in the gas line. Gaskets and strainers are high quality Garlock® BLUE-GARD® Style 3000, and Grade 5 bolts are Xylan® coated for increased corrosion resistance and reduced friction. Gasket strainers are an effective way to to protect the meter and downstream equipment from weld slag and other debris in the gas system.

Ordering Information

• Meter Model
  
• Index Masking
  
• AMR Mounting
  

- Horizontal or Vertical Flow

• Special Badge
  
• Options
  • -  Thermowell
    
  • -  Pulser
    
  • -  Gasket Strainer
    
  • -  Gasket and Bolt Installation Kit
    
    
    
    
    Call Jerry for Expert Help at 866-360-9830 
    
    www.flowfactor.com