Sunday, December 2, 2012

King Gage ~ Purge Control (Down Pipe) Level Control

Level Control at Flow Factor - Bubbler style

216-765-4231


A King downpipe is the simplest type of liquid level sensor, often referred to as a “bubbler." This is merely a length of open ended pipe that extends downward into the tank. LiquiSeal™ or Purge Control differential pressure air flow regulators are highly refined versions of the basic bubbler air control.


Continuous Level Measurement
Simple Proven Sensing Technique
Suitable for Corrosive or Aggressive Liquids
When purged with compressed air, liquid within the downpipe is displaced by air pressure equal to the hydrostatic force of liquid in the tank. If carefully regulated at a low rate of flow, air pressure will constantly maintain equilibrium against the force of the liquid. Air escapes out through the bottom of the pipe unless needed to increase pressure as liquid force (depth) increases.

788 D/P Purge Control is a differential pressure regulator and air flow control. It generates a constant flow of compressed air to purge a downpipe. Its integral differential pressure transmitter provides 4-20 mAdc output proportional to liquid level.


The primary sensor element is typically 3/4 in. diameter pipe purchased from a local source. Always select piping material for compatibility with the tank contents. Downpipe purge systems can be used to measure virtually any type of liquid product including resins, asphalt or corrosive materials.

Output is proportional to liquid depth and can be transmitted as an electronic 4-20 mA signal or pneumatically as a direct 1:1 pressure signal.



LiquiSeal D/P purge control is a fully integrated air purge regulator and level transmitter. Operation is based on the control regulating a continuous 1 cfh (cubic foot per hour) flow of compressed air into the tank downpipe. An internal differential pressure sensor element converts resulting pressure into a 4-20 mA dc two wire signal.

788 D/P Purge Control is a more basic differential pressure regulator and air flow control. It generates a constant flow of compressed air to purge a downpipe. Its integral differential pressure transmitter provides 4-20 mAdc output proportional to liquid level. 780 Purge Control is an all-pneumatic version that does not include the integral transmitter. It provides a 1:1 pressure signal to a compatible indicator or external transducer through 1/4 in. airline tubing. The purge control holds a fixed pressure differential across a precision orifice to ensure constant flow rate of 1 cfh (cubic foot per hour). This regulated low flow rate makes it possible to maintain a linear 1:1 response of the sensing system. In this way, back pressure sensed is equivalent to the hydrostatic head pressure due to actual liquid depth.

Pneumatic Output Signal
Purge Control or LiquiSeal Control provides air pressure signal to an external transmitter or compatible indicator (with integral transducer). Typically, 1/4” poly or soft copper tubing is used to convey the pressure signal up to 1000 feet from the tank.

Electronic 4-20 mA Output
D/P Purge Control or D/P LiquiSeal transmitter provides a 4-20 mA output over a two wire cable to an indicator or the analog I/O of a PLC. Using twisted pair shielded cabling permits transmission distances of several thousand feet to a remote receiver.

Hazardous Zone Service - The downpipe sensor and pneumatic components are fully compatible with explosion hazard environments. This makes pneumatic the sensible alternative for hazardous areas without the cost and complications of intrinsic safety barriers or explosion-proof products.*

Transmitter turndown ratio is 3:1 for the 0–15, 0–30, 0–50 psid nominal ranges.

Nominal      Minimum     Range of Adjustment
0–5 psid     0–3 psid    0–83 in. thru 0–138 in. water / 0–2.1 m thru 0–3.5 m water
0–10 psid   0–3 psid    0–83 in. thru 0–277 in. water / 0–2.1 m thru 0–7.0 m water
0–15 psid   0–3 psid    0–83 in. thru 0–415 in. water / 0–2.1 m thru 0–10.5 m water
0–30 psid   0–10 psid  0–277 in. thru 0–830 in. water / 0–7.0 m thru 0–21.0 m water
0–50 psid   0–15 psid  0–415 in. thru 0–1384 in. water / 0–10.5 m thru 0–35.1 m water

IMPORTANT! Accuracy, linearity, and non-repeatability values are based on nominal range.

Call Flow Factor for more information - 866-360-9830
or email  info@flowfactor.com
or visit our contact page on the web site.











King Gage Liquid Level Transmitters

Flow Factor sells KING GAGE Level Systems

Common applications are:


  • Beverages
  • Fats & Oils
  • Dairy Products
  • Fruit & Vegetable Juices
  • Sauces & Condiments
  • Confectionery




KING-GAGE® ES2 transmitters provide liquid level measurement for inventory monitoring. Add to their rugged reliability the major benefits of simplified service and maintenance. Performance characteristics of these transmitters include excellent stability and repeatability (better than 0.02% FS). Transmitter span accommodates a 3:1 turndown ratio* to match the application pressure range (i.e. tank depth) and the 4-20 mAdc output is compatible with PLCs or other control architecture using analog I/O.
KING-GAGE ES2 transmitters are applicable to most tanks or process vessels whose contents remain at normal atmospheric pressure. They measure hydrostatic head pressure created by liquid depth in the tank and are unaffected by foaming or internal obstructions such as agitators. Unlike load cells, pressure based measurement has lower installation cost and is far simpler to maintain thus ensuring more reliable readings. 
Transmitters used in sanitary processing must often endure cycles of rapid temperature fluctuation. Washdown environments produce significant condensation on metallic surfaces that coupled with aggressive cleansing agents demand robust protection for these instruments. The ES2 transmitter's enhanced design uses encapsulation for full isolation of the internal electronics. This extends to the IP68 grade M12 signal connector that ensure integrity and long term reliability. You can be assured of a transmitter truly built for the demands and expectations of today's processing environment.
Sanitary Configurations
These sensors are especially suited to a wide range of sanitary applications on storage or continuous processing vessels. The 316 stainless diaphragm is appropriate for flush mount, clean-in-place installation employing an FDA-approved silicone rubber O-ring seal to achieve the crevice-free, positive compression seal between diaphragm and tank liner. Sanitary tank mountings include flush weld mountings with product contact surfaces of 316L stainless. (Quick disconnect sanitary adapters are also available for sensor mounting.)

*3:1 turndown ratio is applicable to 0-10 and 0-30 nominal range, refer to specifications for detailed span adjustment available on specific range models.
Mounting Options
Flush-mounting configurations are intended to meet the 3-A Sanitary Standards for clean-in-place applications. The ES2 transmitter fits directly into KING-GAGE tank shells or with an adapter on other manufacturers' mounting shells.

Installation Options
The KING-GAGE ES2 transmitter offers a choice of configurations to match your application needs. The integral stainless steel housing shown here includes a watertight connector for signal cable installation. Mounting lengths offered are intended to mate with tank fittings on non-insulated (singlewall) or insulated wall tanks. Adapters provide additional mounting options when retrofitting systems from other manufacturers.







LevelBAR Tank Level Indicator

• Visual Display of Tank Levels
• Custom Scale for Weight or Volume
• Direct Replacement for Manometer Gauges
• 4-20 mA output signal available to PLC 

The LevelBAR multi-segment LED column display includes an individualized scale calibrated to the actual tank capacity. Marked in any specified unit(s) of measurement, it permits direct reading of total liquid weight or volume. This unique analog column indicator works as a local or auxiliary remote display in new or retrofit applications.

Pneumatic input models include an integrated differential pressure (D/P) element. This allows LevelBAR to be used with bubblers or other air operated systems as a direct replacement for mercury tank gauges or other fluid-filled manometers. It even provides 4-20 mA output compatible with other receivers or to use for process control functions.



LP2 Multiple Tank Digital Indicator


•  8 Tank Multiple Channel Capacity
•  Operator Interface Display & Keypad
•  RS-485 Multidrop Communications

LP2 Multiple Tank Indicators expresses tank level directly in engineering units. Referencing a capacity profile to correlate transmitter output to actual tank geometry, the indicator formats the resulting value directly as the total weight or volume of liquid in the tank. LP2 Multiple Tank Indicator provides an operator interface keypad for access to function selection and density adjustments. There are no user conversion factors involved or scaling points to enter. All application details are factory programmed into an innovative nonvolatile modular memory called the Datapack iButton.

LP2 multiple tank indicators accept up to eight input channels that receive proportional 4-20 mA signals from liquid level transmitters. The actual sensor used to detect hydrostatic pressure created by liquid depth can be either electronic or pneumatic (using an electronic pressure transmitter to convert the sensor's pneumatic signal into 4-20 mA output).

LP2 multiple tank indicators can be used to eliminate analog I/O at your PLC or PC-based control system. As data acquisition hubs, each LP2 tank level indicator provides multiple point serial communications. An expandable network of up to 32 discrete indicators can be installed on a single two wire network (RS-485) for total of 256 possible input channels. Dual serial ports support multiple network configurations including query-response communications with a computer (or PLC), remote satellite displays, or interface to a KING-GAGE® LP3 system.



Contact Flow Factor HERE.
216-765-4231





Industrial Circulation / Tankless Heaters


Flow Factor provides in pipe heaters for heating liquids and gases.
Inline pipe heaters are also known as circulation heaters, tankless heaters, in-line heaters or instantaneous heaters.
Industrial circulation heaters are packaged units consisting of a screwplug or flanged immersion heater mounted in a thermally insulated heating chamber for efficient heating of a flowing medium by in-line (tankless) or side-arm operation. Thermocouple sensors can be provided to connect to most any controller. Select from many terminal enclosures, sheath and vessel materials, flanged connections, and controls. Many models in stock.


Circulation heaters provide a ready-made means to install electric heating with a minimal amount of time and labor. This is accomplished by combining heating elements, vessel, insulation, terminal enclosure, mounting brackets and inlet and outlet connections into a complete assembly.
Made from NPT screw plug or ANSI flange heater assemblies mated with a pressure vessel (tank), circulation heaters are designed to heat forced-circulation air, gases or liquids. Ideal for either in-line or side-arm operations, these assemblies direct fluids past FIREBAR® or WATROD™ heating elements, to deliver fast response and even heat distribution.
Applications include: Water Heating, Freeze Protection, Heat Transfer Oil Heating, Fuel Oil Heating, Stea, Air, and Gas Heating and others.




• Watt densities up to 120 W/in2 (18.6 W/cm2)
• Wattages to three megawatts
• UL® and CSA component recognition up to 600VAC (FIREBAR to 480VAC)
• Ratings to ANSI Class 600 pressure class
• Incoloy® sheath temperatures up to 1600°F (870°C)
• Passivated 316 stainless steel sheath temperatures up to 1200°F (650°C)
• Steel sheath temperatures to 750°F (400°C) • Copper sheath temperatures to 350°F (175°C) • Up to 3000psi design pressure
Clean Water Heaters are ideal for heating municipal water for industrial washing and rinsing processes. Other applications include indirect heating of viscous liquids and temperature maintenance of storage tanks.
Light and Medium Weight Oil Heaters are ideal for temperature maintenance and for improving flow characteristics of oils. Heavy or Fuel Oil Heaters will reduce the viscosity, thereby improving flow and process efficiency.
Industrial circulation heaters provide a cost effective means for heating air and common industrial gases such as Argon, Helium and Nitrogen. They can also be used to increase the enthalpy and quality of steam.
Mild corrosive heaters allow the heating of solutions using stainless elements and a passivated stainless pipe body. Highly corrosive solutions and oils can be heated with the low watt density INCOLOY® sheath elements coupled with a passivated Stainless Steel pipe body, providing long service life.


Typical Applications
Water: • Deionized • Demineralized • Clean • Potable • Process • Industrial water rinse tanks •

Lubricating oils at API specified watt densities • Heat transfer oil • Paraffin • Caustic cleaners •
Hydraulic oil, crude, asphalt

Nitrogen, hydrogen and other air/gas systems • Superheating steam

Wattages and Voltages
Watlow routinely supplies circulation heaters from 120 to 600VAC (WATROD to 600VAC) as well as wattages from 500 watts to three megawatts. If required, Watlow will configure circulation heaters with voltages and wattages outside these parameters.

Weatherproof Protective Steel Jacket (Shroud)
To protect circulation heaters from weather or wash-down conditions, fully welded (weatherproof) or partially welded (standard) outer protective steel jackets are available. Standard steel, or made-to-order 304 or 316 stainless steel can be supplied. Jacket diameter is dependent upon thermal insulation thickness.

Options
Stand-off Terminal Enclosures
Stand-off terminal enclosures help protect terminal enclosures against excessive temperatures.
ASME Pressure Vessel Code Welding
Flange or screw plug assemblies can be provided with an ASME Section VIII or Section I, Div. I pressure vessel stamp upon request.
Branch Circuits
Branch circuits are designed for 48 amperes per circuit maximum. Contact a Watlow representative for circuit requirements other than those listed in the stock charts.



Certified Assemblies
CSA, ATEX or IEC Ex certified moisture and/or explosion resistant terminal enclosures protect wiring in hazardous gas environments. These terminal enclosures, covered under CSA file number 61707, ATEX certificate # KEMA 07ATEX0172X or IEC Ex certificate # IEC Ex CSA 09.0010 are available on WATROD flange heaters.

Contact Flow Factor HERE.
216-360-9830



Saturday, October 27, 2012

Penberthy Dual-Window Sight Flow Indicators

Flow Factor offers Flow Site Windows by Penberthy.
Flow Sites indicate flow via a glass window and can be offered with a flapper, rotator, drip tube or gaseous.


In high traffic or confined areas, add protection to your pipeline system.
Dual-Window Sight Flow Indicators provide two glass discs on each side, so that if either glass should fail for any reason, the other window can temporarily withstand pressures until the unit can be repaired or replaced.  Dual-Window Sight Flow Indicators and Factory Mutual System Approved Dual-Window Sight Flow Indicators are available in 150# NPT Models and 150# and 300# Flanged Models.  FM-Approved 150# units are rated for 150 psig.  FM-Approved 300# units are rated for 300 psig. 














The double, tempered glass window design provides added protection in applications where there is:
External mechanical impact - if the outer glass is cracked or shattered, the inner glass can temporarily continue in service until the unit can be repaired or replaced.
Abnormal compressive forces - in maintenance or replacement situations, the housing assists in alignment of the glass and can absorb uneven or excessive compression.
Thermal shock - in high temperature applications the inner and outer glass protect one another from an extreme thermal gradient.  The air pocket between the glass provides an insulative effect.
Corrosion/erosion - if the inner glass is weakened and it breaks, the outer glass can temporarily contain the fluid, withstand the pressure, and continue in service until the unit can be repaired or replaced.







or go to our Penberthy Parts form HERE.

Friday, October 26, 2012

Ametek US Gauge Stock at Flow Factor

Flow Factor Stocks US Gage ( Ametek ) Pressure and Temperature Gauges
All the below gages are in stock and can ship TODAY!
Please call Jerry at 866-360-9830 to get a great price on a US Gauge.
or email with our contact page here.

U.S. Gauge is one of the world's leading suppliers of high quality, competitively priced pressure and temperature measurement products. Founded in 1904, USG's product offering includes bourdon tube and diaphragm capsule pressure gauges ranging in size from 1-1/2 inches to 6 inches; with brass, stainless steel, alloy steel or Monel internals.




152459 US GAUGE 3"  PROTECTIVE CAP 152459
160910 USG THERM. 2 FIG. 621002, 160910
161032 USG THERMOMETER, 6, 0-200 161032
256007 USG 656, 63MM, 0-15#, 1/4" LM 256007
256008 USG 6562, 63MM, 0-30#, 1/4" LM 256008
256009 USG 656, 63MM, 0-60#, 1/4" LM 256009
256011 USG 656, 63MM, 0-160#, 1/4" LM 256011
256014 USG 656, 63MM, 0/400#, 1/4" LM 256014
256015 US GAUGE 63MM, 0-600#, 1/4" LM 256015
256016 US GAUGE 63MM, 1/4" LM, 0-1000
256017 USG 656, 63MM, 0-1500#, 1/4"LM 256017
256022 USG 656, 63MM, 6000# 256022
256089 USG 656, 63MM, 1500#, 1/4"LBM 256089
256095 USG 656, 63MM 10,000#, 1/4"CBM 256095
256169 USG 656, 63MM, 0-160#, 1/4"LM 256169
356035 US GAUGE 100MM, 0-100#, 1/2"LM 356035
356060 USG 656, 100MM, 0-100# 356060
CR1780-88714 US GAUGE CR1780, 2.5", 88714
CR599-5328 US GAUGE CR599, RET.30 30#, 5328
C1780-88710 USG C1780, 2.5, 30-400# 88710
C500-15936 USG C500, 3.5, 30 300#, 1/4 LM 15936
C500-46646 US GAUGE C500, 2-1/2, 30/60#,  46646
C500-47001 US GAUGE C500, 2-1/2, 30/15#,  47001
C500-47105 US GAUGE C500, 2-1/2, 30-30#,  47105
C500-47925 USG C500, 2, 30 60#, 1/8LM 47925
C500-49609 USG C500, 2, 30 150#, 1/8 LM 49609
C500-51557 USG C500, 30 30#, 1/4 LM 51557
C500-5493 US GAUGE C500, 3-1/2, 30/15#,  5493
C500-5496 US GAUGE C500, 3.5, 30"/60#, 5496
C500-5549 US GAUGE C500, 4.5, 30"/30#, 5549
C500-58156 USG C500, 2.5, 30-0-300#, 58156
C500-66662 USG C500, 30 15#, 1/8 LM 66662
C505A-5495A US GAUGE C505A, 3.5", 30-0-30# 5495A
C555-153242 US GAUGE C555, 63MM, 30-0-30,  153242
C555-153245 USG C555, 63MM, 30-0-150#, 153245
D124101 USG DIAL, 4.5", 160#/0-11 BAR D124101
N230104 US GAUGE 2" LAZY HAND N230104
PT1088K-199960 USG PT1088K, 2.5", 75#/60-320F 199960
PT1088-144826 US GAUGE PT1088, 3.5, 1/2LM 144826
PT1088-144827 US GAUGE PT1088, 3.5, 1/2LBM 144827
P1508-105060 US GAUGE P1508, 2.5", 0-150# 105060
P1530-110788 USG P1530, 2.5, 0-1000#, 110788
P1535-110793 US GAUGE P1535, 2.5, 30#, 110793
P1535-110797 US GAUGE P1535, 2.5, 300#, 110797
P1535-110798 US GAUGE P1535, 2.5, 400#, 110798
P1535-148182 US GAUGE P1535, 2.5, 3000#, 148182
P1535-148956 USG P1535, 2, 0-60#, 1/4 LM 148956
P1535-148957 US GAUGE P1535, 2, 100#, 1/4LM 148957
P1535-148963 USG P1535, 2, 0-1000#, 1/4 LM 148963
P1535-149642 USG P1535, 2, 30-0-150#, 149642
P1535-88124 US GAUGE P1535, 3.5, 60#, 88124
P1535-88125 US GAUGE P1535, 3.5, 100#, 88125
P1535-88885 US GAUGE P1535, 3.5, 30# 88885
P1535-88886 US GAUGE P1535, 3.5, 160#, 88886
P1535-88887 US GAUGE P1535, 3.5, 200#, 88887
P1535-88888 US GAUGE P1535, 3.5, 300#, 88888
P1535-88973 US GAUGE P1535, 3.5, 88973
P1559-165309 US GAUGE P1559, 2.5", 0-1000#, 165309
P500K-1.5-146001 US GAUGE P500, 1-1/2", 0-30# 146001
P500K-1.5-146002A US GAUGE P500K, 1.5", 60#, 146002A
P500K-1.5-146004 US GAUGE P500, 1-1/2, 160#, 146004
P500K-1.5-146006A US GAUGE P500K, 1.5", 0-300# 146006A
P500K-1.5-146007A USG  P500K, 1.5", 0-600#, 146007
P500K-1.5-146008 US GAUGE P500, 1-1/2, 1000#, 146008
P500K-1.5-146010A US GAUGE P500K, 1.5", 0-15# 146010A
P500K-1.5-146012 US GAUGE P500, 1-1/2, 60#, 146012
P500K-1.5-146014 US GAUGE P500, 1-1/2, 160#, 146014
P500K-1.5-146016 USG P500, 1.5, 0-300#, 1/8 CBM 146016
P500K-1.5-146019 US GAUGE P500, 1.5, 2000#, 146019
P500K-1.5-166318 USG P500K 1 1/2 DIAL 0-100PSI 166318
P500K-1.5-166320 US GAUGE P500K, 1.5, 30#, 166320
P500K-1.5-166321 USG GAUGE P500K, 1.5, 60#, 166321
P500K-1.5-166322 USG P500K, 1.5, 100#, 1/8" CBM 166322
P500K-1.5-166323 US GAUGE P500K, 1.5, 160#, *** 166323
P500K-2-163149 US GAUGE P500K, 2, 0-30#, 163149
P500K-2-163269 US GAUGE P500K, 2, 0-60#, 163269
P500K-2-163270 US GAUGE P500K, 2", 0-160#, 163270
P500K-2-163272 US GAUGE P500K, 2", 0-60# 163272
P500K-2-163273 US GAUGE P500K, 2", 0-100#, 163273
P500K-2-163274 USG P500K, 2", 0-160#, 1/4"CBM 163274
P500K-2-163275 US GAUGE P500K, 2, 0-200#, 163275
P500K-2-163276 US GAUGE P500K, 2, 0-300#, 163276
P500K-2-163930 USG P500K, 2", 0-30#, 1/8" CBM 163930
P500K-2-45330 US GAUGE P500, 2, 100#, 1/4LM 45330
P500K-2-46644 US GAUGE P500, 2", 30#, 46644
P500K-2-46645 USG P500, 2", 0-200#, 1/8 LM 46645
P500K-2-46778 US GAUGE P500, 2, 0-300#, 46778
P500K-2-46987 US GAUGE P500, 2, 0-15#, 46987
P500K-2-46989 USG P500, 2, 0-200#, 1/4 CBM 46989
P500K-2-46991 U.S. GAUGE P500, 2, 0-600#, 46991
P500K-2-47101 US GAUGE P500, 2, 200#, 1/4LM 47101
P500K-2-47490 US GAUGE P500, 2, 0-30#, 47490
P500K-2-47491 US GAUGE P500, **(SEE NOTE) 47491
P500K-2-47492 US GAUGE P500, 2", 0-400#, 47492
P500K-2-47493 US GAUGE P500, 2", 0- 600#, 47493
P500K-2-47494 USG P500, 2, 0-1000#, 1/4 LM 47494
P500K-2-47615 US GAUGE P500, 2", 15#, 47615
P500K-2-49488 US GAUGE P500, 2", 0-30#, 49488
P500K-2-50755 U.S. GAUGE P500, 2, 0-300#, 50755
P500K-2-52420 US GAUGE P500, 2, 15#, 1/8LM 52420
P500K-2-55155 US GAUGE P500, 2, 60#, 1/8CBM 55155
P500K-2-70791A USG P500K, 2", 0-160#, 1/8" CB 70791A
P500K-2.5-143072A US GAUGE P500K, 2.5", 0-5000# 143072A
P500K-2.5-163279 US GAUGE P500K, 2.5", 0-60# 163279
P500K-2.5-163280 US GAUGE P500K, 2.5", 0-100#, 163280
P500K-2.5-163281 US GAUGE, P500K, 2.5, 0-160PSI 163281
P500K-2.5-163282 US GAUGE P500K, 2.5", 0-200# 163282
P500K-2.5-163286 US GAUGE P50OK, 2.5", 200#, 163286
P500K-2.5-171400A US GAUGE P500K, 2.5", 0-3000# 171400A
P500K-2.5-46647 US GAUGE  P500, 2.5, 0-300#, 46647
P500K-2.5-46648 US GAUGE P500, 2-1/2, 600#, 46648
P500K-2.5-46779 US GAUGE P500, 2-1/2, 100#, 46779
P500K-2.5-46995 USG P500, 2.5, 3000#, 1/4 CBM 46995
P500K-2.5-47102A US GAUGE P500K, 2.5", 0-15# 47102A
P500K-2.5-49611 US GAUGE P500, 2-1/2, 400#, 49611
P500K-2.5-49660 US GAUGE P500, 2.5", 0-100#, 49660
P500K-2.5-50851 USG P500, 2.5, 0-600#, 1/4 CBM 50851
P500K-2.5-50852A USG P500K, 2.5" 0-200#, 1/8"LM 50852A
P500K-2.5-50870 US GAUGE P500, 2.5", 0-1000#, 50870
P500K-2.5-51375 US GAUGE P500, 2-1/2, 160#, 51375
P500K-2.5-51483 US GAUGE P500, 2-1/2, 30#, 51483
P500K-2.5-52827A US GAUGE P500K, 2.5", 0-15# 52827a
P500K-2.5-59306 US GAUGE P500, 2.5, 0-30#, 59306
P500K-3.5-168536 USG  P500K, 3.5", 30#, 1/4" LM 168536
P500K-3.5-168538 USG  P500K, 3.5", 100#, 1/4"LM 168538
P500K-3.5-168540 USG  P500K, 3.5, 200#, 1/4" LM 168540
P500K-3.5-5502 US GAUGE P500, 3-1/2, 15#, 5502
P500K-3.5-5506 US GAUGE P500, 3-1/2, 60#, 5506
P500K-3.5-5510 US GAUGE P500, 3-1/2, 160#, 5510
P500K-3.5-5514 US GAUGE P500, 3-1/2, 300#, 5514
P500K-3.5-5515 USG P500, 3-1/2", 400# 1/4"LM 5515
P500K-4.5-5551 US GAUGE P500, 4-1/2, 60#, 5551
P500K-4.5-5554 US GAUGE P500, 4-1/2, 100#, 5554
P500K-4.5-5559 US GAUGE P500, 4-1/2, 160#, 5559
P500K-4.5-5561 US GAUGE P500, 4-1/2, 200#, 5561
P500K-4.5-5804 US GAUGE P500, 4-1/2, 30#, 5804
P528-21546 US GAUGE P528, 2", 0-15#, 21546
P528-21547 US GAUGE P528, 2", 0-30# 21547
P551-153056 US GAUGE P551, 63MM, 60#, LF 153056
P555-153253 US GAUGE P555, 63MM, 0-400#, 153253
P555-153254 US GAUGE P555, 63MM, 600#, 153254
P555-165298 US GAUGE P555, 63MM, 0-100#, 165298
P556-153299 US GAUGE P556, 63MM, 0-200#, 153299
P559-153438 US GAUGE P559, 63MM, 15#, 153438
P562U-146260 US GAUGE P562U, 1.5", 0-160#, 146260
P563-101465 US GAUGE P563, 1-1/2, 30#, 101465
P563-102021 US GAUGE P563, 1-1/2, 30#, 102021
P563-102029 US GAUGE P563, 1-1/2, 100#, 102029
P563-102030 US GAUGE P563, 1-1/2, 160#, 102030
P580L-136310 US GAUGE P580L, 2-1/2, 15#, 136310
P580L-136316 US GAUGE P580L, 2-1/2, 300#, 136316
P580L-136317 USG P580L, 2.5, 0-400#, 1/4 LM 136317
P580L-136319 US GAUGE P580L, 2.5, 1000#, 136319
P580L-136329 US GAUGE P580L, 2.5, 300#, 136329
P580L-138815 US GAUGE P580L, 2-1/2, 3000# 138815
P580L-142086 US GAUGE P580L, 2.5, 2000#, 142086
P590K-160660A US GAUGE P590K, 2", 0-100# 160660
P590-146991 USG P590, 1.5, 0-60#, 1/8 LM 146991
P590-146992 US GAUGE P590, 1-1/2, 100#, 146992
P590-146995 US GAUGE P590, 1-1/2, 0-30 PSI 146995
P590-160652 US GAUGE P590, 2, 30#, 1/4LM 160652
P590-160654 US GAUGE P590, 2, 0-100#, 160654
P601-143403 US GAUGE P601, 2, 4000#, 143403
P602-45508 US GAUGE P602, 2.5, 200#, 45508
P607-139660 US GAUGE P607, 2", 4000#, 139660
P612-164289 US GAUGE P612, 2.5", 0-400#, 164289
P612-165616 US GAUGE P612, 2.5", 30#, 165616
P612-166356 US GAUGE P612, 1.5", 30 PSI 166356
P618-165071 US GAUGE P618, 2.5", 0-600#, 165071
P733-21551 US GAUGE P733, 2.5, 15" H20 21551
P733-75991 US GAUGE P733, 2.5 20 OZ., 75991
P733-75995 US GAUGE P733, 2.5, 60H2O 75995
P733-75996 US GAUGE P733, 2.5, 0-10#, 75996
P734-161963 US GAUGE P734, 2.5, 15" H20, 161963
P734-161964A US GAUGE P734, 2.5, 35" H20, 161964
P734-161965 US GAUGE P734, 2.5, 100 H20 161965
P734-161970A US GAUGE P734, 2.5, 5#, 1/4LM 161970
P844U-138025 US GAUGE P844U, 3.5, 0-15#, 138025
P844U-138026 US GAUGE P844U, 3.5, 30#, 138026
P844U-138027 US GAUGE P844U, 3.5, 60# 138027
P844U-138028 US GAUGE P844U, 3.5, 0-100# 138028
P844U-138030 USG P844U, 3.5, 0-300#, 138030
P844U-160758 US GAUGE P844U, 2, 200#, 160758
P844U-164416 US GAUGE P844U, 2, 15#, 164416
P844U-164417 US GAUGE P844U, 2", 30# 164417
P844U-164418 US GAUGE P844U, 2, 0-60#, 164418
P844U-164419 USG P844U, 2", 0-100#, 1/8"CBM 164419
P844U-164420 US GAUGE P844U, 2", 0-160#, 164420
P844U-164421 US GAUGE P844U, 2", 200#, 164421
P844U-164423 US GAUGE P844U, 2", 0-400# 164423
P844U-164424 US GAUGE P844U, 2", 0-600#, 164424
P844U-164426 US GAUGE P844U,  2.5, 0-15 PSI 164426
P844U-164427 US GAUGE P844U, 2.5", 0-30# 164427
P844U-164428 US GAUGE P844U, 2.5, 60#, 164428
P844U-164429 US GAUGE P844U, 2.5, 0-100#, 164429
P844U-164430 USG P844U, 2.5, 0-160#, 164430
P844U-164431 USG P844U, 2.5, 0-200#, 164431
P844U-164432 US GAUGE P844U, 2.5", 0-300#, 164432
P844U-164433 US GAUGE P844U, 2.5, 400#, 164433
P844U-164434 US GAUGE P844U 0-600#, 2 1/2" 164434
P844U-164435 USG P844U, 2.5, 0-1000#, 1/4LM 164435
P844U-164436 US GAUGE P844U, 2.5", 0-2000# 164436
P845FF-164441 USG P845FF, 2", 0-30#, 164441
P845FF-164442 USG P845FF, 2" 0-60 # 164442
P845FF-164447 USG P845FF, 2, 0-400#, 1/8 CBM 164447
P845FF-164452 US GAUGE P845FF, 2.5, 60#, 164452
P845FF-164453 USG P845FF, 2.5, 0-100# 164453
P845FF-164454 USG P845FF, 2.5, 0-160#, 164454
P845FF-164455 USG P845FF, 2.5", 0-200#, 164455
P845FF-164456 USG P845FF, 2.5, 0-300#, 164456
P845FF-164457 US GAUGE P845FF, 2.5, 400#, 164457
R500U-143276 USG R500U, 3.5, 80/250 PSI & 143276
T571-38829 US GAUGE T571, 5, 1/2LM, 38829
T572-19154 US GAUGE T572, 5, 1/2" LBM, 19154
V500K-163712 US GAUGE V500K, 2", 30"HG, 163712
V500K-47225A US GAUGE V500, 2", 30HG, 47225
V500-146020 US GAUGE V500, 1-1/2, 30" HG, 146020
V500-5491 US GAUGE V500, 3-1/2, 30" 5491
V534-50462A US GAUGE V534, 2", 30"HG, 50462A
V844U-164415 US GAUGE V844U, 2", 30", 164415
1370-35243 US GAUGE 1370, 2, 3-15# 0-100% 35243
1370-35244 US GAUGE 1370, 2.5, 3-15#/0-10 35244
1370-75819 USG 1370, 3.5, 3-15# 0-10 SQ.R 75819
1381-22047 USG 1381, 3.5, 3-15# 0-100 22047
1406-160246 US GAUGE 1406, 4.5, 5000#, 160246
1408-149690 US GAUGE 1408, 3, 3000#, 149690
1408-44578 US GAUGE 1408, 3, 30#, 1/4LM 44578
1408-44579 US GAUGE 1408, 3, 60#, 1/4LM 44579
1408-44582 US GAUGE 1408, 3, 200#, 1/4LM 44582
1408-44585 US GAUGE 1408, 3, 1000#, 1/4LM 44585
1408-52513 US GAUGE 1408, 3, 2000#, 1/4LM 52513
508-12309 US GAUGE 508, 3, 0-15#, 1/4LM 12309
523-66313 USG POINTER ADJUSTER 66313
540-151457 USG   540, 100MM, 60#, 1/4LM * 151457
540-151872 US GAUGE 540, 100MM, 0-30# 151872
541-151907 US GAUGE 541, 100MM, 60#, 151907
541-151922 US GAUGE 541, 100MM, 30#, 151922
5801-126589 USG 5801, 3.5, 0-100#, 1/4 LM 126589
5801-126591 USG 5801,3.5, 0-200#, 1/4 LM 126591
5801-132611 USG 5801, 4.5, 30-0-30#, 132611
5801-132616 USG 5801, 4.5, 0-30#, 1/4 LM 132616
5801-132620 USG 5801, 4.5, 0-200#, 1/4 LM 132620
5801-132624 USG 5801, 4.5, 0-1000#, 1/4 LM 132624
5803-132652 US GAUGE 5803, 4-1/2, 200# 132652
5841-126622 US GAUGE 5841, 3.5, 1000#, 126622
5843-126631 US GAUGE 5843, 3.5, 1500#, 126631


www.flowfactor.com

Call Jerry for great pricing and quick shipping.  866-360-9830


U.S. Gauge Low Lead Series P-500 gauges adhere to the “Reduction of Lead in Drinking Water Act” enacted by the U.S. Congress January 2011.
U.S. Gauge Low Lead Series P-500 utility gauges provide economical, reliable service in a wide variety of applications including potable water pumps, compressors, and other equipment.
Series P-500 utility gauges come in standard psi ranges with accuracy of ±3-2-3%.
Gauges are available in 1-1/2”, and 2” steel cases in center-back and lower mount configurations. Other sizes, ranges, and mounting configurationsare available for OEM quantities.

U.S. Gauge Series P-500 utility gauges provide economical, reliable service in a wide variety of applications including pumps, compressors, and other equipment. Series P-500 utility gauges come in English and metric ranges with accuracy of either ±3-2-3% or ±1.6% full scale. Gauges are available in 1-1/2”, 2”, 2-1/2”, 3-1/2”, and 4-1/2” steel cases with a choice of English or metric connections in center-back and lower mount configurations.

U.S. Gauge P-570K utility gauges provide economical, reliable service in a wide range of applications including pumps, compressors, and other equipment.  Series P-570K utility gauges come in ranges of: 0 to 30, 60, 100, 160, 200, and 300 psi, with accuracy of ±3-2-3% of span.  Gauges are available in 2” polypropylene cases with 1/8-27 or 1/4-18 NPT center-back or lower mount connections.

U.S. Gauge P-575 utility gauges provide economical, reliable service in a wide range of applications including pumps, compressors, and other equipment.  Series P-575 utility gauges come in ranges of: 0-30, 60, 100, 160, 200, and 300 psi with accuracy of ±3-2-3% full scale. Gauges are available in 1-1/2" and 2" ABS cases with 1/8-27 or 1/4-18 NPT center-back or lower mount connections (1/8 only on 1-1/2" gauges).

P-590 Series Gauges : The ABS case gauges are weather and rust resistant. The ABS case and polycarbonate window are resistant to most chemicals, allowing continuous exposure to many chemical,
petrochemical, and industrial plant atmospheres. However, these gauges are suitable only for use on process media which are non-corrosive to brass, phosphor bronze, or beryllium copper.

U.S. Gauge P-915 utility gauges provide economical, reliable service in a wide variety of applications including pumps, compressors, and
other equipment.  Series P-915 utility gauges come in English and metric ranges with accuracy of either ±3-2-3% or ±1.6% full scale.  Gauges are available in 40 mm, 50 mm, and 63 mm ABS cases with a choice of English or metric connections in center-back and lower mount configurations.

844 & 845 Series Gauges

Utilizing either front flanged or Uclamp cases, these attractive panel mount gauges can be flush mounted on instrument panels, pressure
test stands, steam cleaners, sterilizers, and many other types of  equipment. Where a minimum of space is available the 844 U-clamp series is more desirable. When it is desirable to mount the gauge from the front of panel, the 845 front flanged series may be specified. All models utilize a unique one piece plastic threaded ring and window which
can be removed, permitting in-panel pointer adjustment. Optional stainless steel bourdon tube and socket for use where the pressure medium is corrosive to copper alloys.

562 Series Gauges

Specially designed to conserve space, these gauges are available for panel mounting and are widely used on medical and dental equipment where panel space is limited.  Available in pressure or vacuum ranges, the 1-1/2" miniature panel mount is the smallest circular gauge available for this use. A special feature, the breakaway U-clamp, permits adjustment for panel thickness up to 0.14".


Call Jerry at Flow Factor for great pricing and quick shipping on Ametek US Gauge products.  866-360-9830