Showing posts with label level indication. Show all posts
Showing posts with label level indication. Show all posts

Saturday, May 29, 2021

Barksdale LevelSite Level Measurement

Flow Factor and Barksdale LevelSite for Level Measurement

Contact Flow Factor HERE!

Barksdale Alloy LevelSite® provides a reliable, accident-proof solution to your unique level measuring problems. Featuring rugged, welded stainless steel construction, the process media is completely isolated from the instrumentation and rotating flags, eliminating the danger of leaks or spills. Barksdale LevelSite units are virtually maintenance free, and unlike traditional sight glasses do not need to be removed from service for cleaning. Large, easy to read flags can be viewed from over 100 feet away. Each Barksdale LevelSite® is available in continuous lengths of up to 20 feet or multiple lengths of up to 65 feet. Our Alloy LevelSite® is suitable for use with oil, water, aggressive liquids in oil refineries, chemical process plants, and a wide variety of other industrial applications.

Features

  • Safe, accident-proof design
  • Rugged, welded stainless steel construction
  • Maintenance-free - no need to be removed from service for cleaning













Applications 
Lube oil console systems 
Hot water/condensate steam systems 
Industrial refrigeration 
Storage tanks 
Solvent recovery systems 
Marine applications 
Industrial refrigeration 
Scrubbers Semi-conductor industry 

Specifcations

Ranges:
Temperature - to 302ºF (150ºC)
Pressure - Vacuum to 1,000 PSIG (68 bar)
Proof Pressure - 1.5 timse maximum flange pressure

Accessories:
Limit Switches, Measuring scale,  
Remote Indication, rotating flag assembly

Maximum Length:
20 feet continuous and 65 with multiple

Inner Housing Diameter:
2-3/8 inches (60mm)

Wall Thickness:
5/64 inches (2mm)

Float Material:
316 stainless steel or titanium

Operating Pressure Maximum @ 100ºF (38ºC)
150 psig  600 psig   960 psig
10 Bar     40 Bar      64 Bar

Flag Colors:
White/ Red

Float Material: 
316 Stainless Steel

Minimum Specific Gravity:
.65 for both SS and titanium

Vent and Drain Plugs:
1/2 Inch NPT (Standard)

Mounting Brackets:
Every three feet (Standard)

Example Part Numbers:

XX.XX =  LevelSite LENGTH per customer application

Below are 1/2 male NPT connections

150LTBMN01GAxx.xxL - Top/Bottom Connections, 150 psi
600LTBMN01GAxx.xxL - Top/Bottom Connections, 600 psi
960LTBMN01GAxx.xxL - Top/Bottom Connections, 960 psi

150LTSMN01GAxx.xxL - Top/Side Connections, 150 psi
600LTSMN01GAxx.xxL - Top/Side Connections, 600 psi
960LTSMN01GAxx.xxL - Top/Side Connections, 960 psi

150LSSMN01GAxx.xxL - Top/Side Connections, 150 psi
600LSSMN01GAxx.xxL - Top/Side Connections, 600 psi
960LSSMN01GAxx.xxL - Top/Side Connections, 960 psi

150LSBMN01GAxx.xxL - Top/Side Connections, 150 psi
600LSBMN01GAxx.xxL - Top/Side Connections, 600 psi
960LSBMN01GAxx.xxL - Top/Side Connections, 960 psi

150LTMMN01GAxx.xxL - Top/Mount Connections, 150 psi
600LTMMN01GAxx.xxL - Top/Mount Connections, 600 psi
960LTMMN01GAxx.xxL - Top/Mount Connections, 960 psi

Below are ANSI Class 150 1 inch Raised Face Flange connections

50LTBMF03GAxx.xxL - Top/Bottom Connections, 150 psi
600LTBMF03GAxx.xxL - Top/Bottom Connections, 600 psi
960LTBMF03GAxx.xxL - Top/Bottom Connections, 960 psi

150LTSMF03GAxx.xxL - Top/Side Connections, 150 psi
600LTSMF03GAxx.xxL - Top/Side Connections, 600 psi
960LTSMF03GAxx.xxL - Top/Side Connections, 960 psi

150LSSMF03GAxx.xxL - Top/Side Connections, 150 psi
600LSSMF03GAxx.xxL - Top/Side Connections, 600 psi
960LSSMF03GAxx.xxL - Top/Side Connections, 960 psi

150LSBMF03GAxx.xxL - Top/Side Connections, 150 psi
600LSBMF03GAxx.xxL - Top/Side Connections, 600 psi
960LSBMF03GAxx.xxL - Top/Side Connections, 960 psi

150LTMMF03GAxx.xxL - Top/Mount Connections, 150 psi
600LTMMF03GAxx.xxL - Top/Mount Connections, 600 psi
960LTMMF03GAxx.xxL - Top/Mount Connections, 960 psi

For a Barksdale LevelSite Quote click  HERE!

Flow Factor
216-765-4231
www.flowfactor.com

Monday, August 22, 2016

PENTAIR Sells to Emerson the Valves and Controls Divison

Flow Factor Sells Penberthy Jets and Level Controls

PRESS RELEASE

Pentair Announces Agreement to Sell Valves & Controls Business to Emerson 
MANCHESTER, United Kingdom – August 18, 2016 – Pentair plc (NYSE: PNR) today announced it has reached an agreement to sell its Valves & Controls business to Emerson (NYSE: EMR). The cash purchase price is $3.15 billion, subject to customary working capital adjustments. The transaction is anticipated to be completed late in 2016 or early in 2017 and is subject to customary closing conditions and necessary regulatory approvals. 
Randall J. Hogan, Pentair Chairman and CEO stated, “We expect this transaction to provide Pentair the ability to advance our strategy, drive growth, and focus resources on three segments, all of which we believe have attractive growth characteristics.” 
Pentair acquired the Valves & Controls business in 2012 through an all-stock merger with the Flow Control business of Tyco International Ltd. Valves & Controls’ 2015 revenue was $1.8 billion. “Through the hard work of dedicated employees, we significantly improved Valves & Controls’ operating profit, creating shareholder value,” said Mr. Hogan. “Additionally, the Flow Control acquisition provided the scale and capital structure to further enable our strategy for growth. ” 
Following the closing of the transaction, Pentair’s business will consist of three segments, Water Quality Systems, Flow & Filtration Solutions, and Technical Solutions, aligned with global trends to deliver solutions around water quality and availability, equipment and building protection, industrial and process efficiency, and food and beverage processing. 
“We remain narrowly diversified, which allows us to prioritize investments and affords us opportunities to grow organically and use our strengthened balance sheet as opportunities arise,” said Mr. Hogan. 
Citi and Goldman, Sachs & Co. are serving as financial advisors to Pentair and Foley & Lardner LLP is providing legal counsel. 
INVESTORS CONFERENCE CALL 
Pentair Chairman and CEO Randall J. Hogan and Chief Financial Officer John L. Stauch will discuss the transaction and updated guidance for the company excluding Valves & Controls on a two-way conference call with investors at 8:00 a.m. Eastern tomorrow, Friday, August 19. A live audio webcast of the call, along with the related presentation, can be accessed in the Investors section of the company's website, www.pentair.com, shortly before the call begins or by dialing 866-271-5991 or 973-638-3449 along with conference number 67785387. A replay of the conference call will be made accessible once it becomes available and will remain accessible through midnight on September 18, 2016 by dialing 855-859-2056 or 404-537-3406 along with the conference number 67785387. The webcast presentation will be archived at the company's website following the conclusion of the event. 
ABOUT PENTAIR Pentair plc (www.pentair.com) delivers industry-leading products, services and solutions for its customers’ diverse needs in water and other fluids, thermal management and equipment protection. With 2015 revenues of $6.4 billion, Pentair employs approximately 28,000 people worldwide. 
CAUTION CONCERNING FORWARD-LOOKING STATEMENTS 
This press release contains statements that we believe to be "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. All statements, other than statements of historical fact are forward-looking statements. Without limitation, any statements preceded or followed by or that include the words "targets," "plans," "believes," "expects," "intends," "will," "likely," "may," "anticipates," "estimates," "projects," "should," "would," "positioned," "strategy," "future" or words, phrases or terms of similar substance or the negative thereof, are forward-looking statements. These forward-looking statements are not guarantees of future performance and are subject to risks, uncertainties, assumptions and other factors, some of which are beyond our control, which could cause actual results to differ materially from those expressed or implied by such forward-looking statements. These factors include the company’s ability to complete the sale of Valves & Controls on anticipated terms and timetable, overall global economic and business conditions, including worldwide demand for oil and gas; the ability to achieve the benefits of our restructuring plans; the ability to successfully identify, finance, complete and integrate acquisitions, including the ability to successfully integrate and achieve the expected benefits of the acquisition of ERICO Global Company; competition and pricing pressures in the markets we serve; the strength of housing and related markets; volatility in currency exchange rates and commodity prices; inability to generate savings from excellence in operations initiatives consisting of lean enterprise, supply management and cash flow practices; increased risks associated with operating foreign businesses; the ability to deliver backlog and win future project work; failure of markets to accept new product introductions and enhancements; the impact of changes in laws and regulations, including those that limit U.S. tax benefits; the outcome of litigation and governmental proceedings; and the ability to achieve our long-term strategic operating goals. Additional information concerning these and other factors is contained in our filings with the U.S. Securities and Exchange Commission ("SEC"), including in our 2015 Annual Report on Form 10-K. All forward-looking statements speak only as of the date of this report. We assume no obligation, and disclaim any obligation, to update the information contained in this report. 
# # # 
Pentair contact: 
Jim Lucas 
Vice President, Investor Relations & Strategic Planning 
Tel.: 763-656-5575 
E-mail: jim.lucas@pentair.com 
Rebecca Osborn 
Senior Manager, External Communications 
Tel.: 763-656-5589 

E-mail: rebecca.osborn@pentair.com 

Flow Factor
866-360-9830

Sunday, December 2, 2012

King Gage ~ Purge Control (Down Pipe) Level Control

Level Control at Flow Factor - Bubbler style

216-765-4231


A King downpipe is the simplest type of liquid level sensor, often referred to as a “bubbler." This is merely a length of open ended pipe that extends downward into the tank. LiquiSeal™ or Purge Control differential pressure air flow regulators are highly refined versions of the basic bubbler air control.


Continuous Level Measurement
Simple Proven Sensing Technique
Suitable for Corrosive or Aggressive Liquids
When purged with compressed air, liquid within the downpipe is displaced by air pressure equal to the hydrostatic force of liquid in the tank. If carefully regulated at a low rate of flow, air pressure will constantly maintain equilibrium against the force of the liquid. Air escapes out through the bottom of the pipe unless needed to increase pressure as liquid force (depth) increases.

788 D/P Purge Control is a differential pressure regulator and air flow control. It generates a constant flow of compressed air to purge a downpipe. Its integral differential pressure transmitter provides 4-20 mAdc output proportional to liquid level.


The primary sensor element is typically 3/4 in. diameter pipe purchased from a local source. Always select piping material for compatibility with the tank contents. Downpipe purge systems can be used to measure virtually any type of liquid product including resins, asphalt or corrosive materials.

Output is proportional to liquid depth and can be transmitted as an electronic 4-20 mA signal or pneumatically as a direct 1:1 pressure signal.



LiquiSeal D/P purge control is a fully integrated air purge regulator and level transmitter. Operation is based on the control regulating a continuous 1 cfh (cubic foot per hour) flow of compressed air into the tank downpipe. An internal differential pressure sensor element converts resulting pressure into a 4-20 mA dc two wire signal.

788 D/P Purge Control is a more basic differential pressure regulator and air flow control. It generates a constant flow of compressed air to purge a downpipe. Its integral differential pressure transmitter provides 4-20 mAdc output proportional to liquid level. 780 Purge Control is an all-pneumatic version that does not include the integral transmitter. It provides a 1:1 pressure signal to a compatible indicator or external transducer through 1/4 in. airline tubing. The purge control holds a fixed pressure differential across a precision orifice to ensure constant flow rate of 1 cfh (cubic foot per hour). This regulated low flow rate makes it possible to maintain a linear 1:1 response of the sensing system. In this way, back pressure sensed is equivalent to the hydrostatic head pressure due to actual liquid depth.

Pneumatic Output Signal
Purge Control or LiquiSeal Control provides air pressure signal to an external transmitter or compatible indicator (with integral transducer). Typically, 1/4” poly or soft copper tubing is used to convey the pressure signal up to 1000 feet from the tank.

Electronic 4-20 mA Output
D/P Purge Control or D/P LiquiSeal transmitter provides a 4-20 mA output over a two wire cable to an indicator or the analog I/O of a PLC. Using twisted pair shielded cabling permits transmission distances of several thousand feet to a remote receiver.

Hazardous Zone Service - The downpipe sensor and pneumatic components are fully compatible with explosion hazard environments. This makes pneumatic the sensible alternative for hazardous areas without the cost and complications of intrinsic safety barriers or explosion-proof products.*

Transmitter turndown ratio is 3:1 for the 0–15, 0–30, 0–50 psid nominal ranges.

Nominal      Minimum     Range of Adjustment
0–5 psid     0–3 psid    0–83 in. thru 0–138 in. water / 0–2.1 m thru 0–3.5 m water
0–10 psid   0–3 psid    0–83 in. thru 0–277 in. water / 0–2.1 m thru 0–7.0 m water
0–15 psid   0–3 psid    0–83 in. thru 0–415 in. water / 0–2.1 m thru 0–10.5 m water
0–30 psid   0–10 psid  0–277 in. thru 0–830 in. water / 0–7.0 m thru 0–21.0 m water
0–50 psid   0–15 psid  0–415 in. thru 0–1384 in. water / 0–10.5 m thru 0–35.1 m water

IMPORTANT! Accuracy, linearity, and non-repeatability values are based on nominal range.

Call Flow Factor for more information - 866-360-9830
or email  info@flowfactor.com
or visit our contact page on the web site.











King Gage Liquid Level Transmitters

Flow Factor sells KING GAGE Level Systems

Common applications are:


  • Beverages
  • Fats & Oils
  • Dairy Products
  • Fruit & Vegetable Juices
  • Sauces & Condiments
  • Confectionery




KING-GAGE® ES2 transmitters provide liquid level measurement for inventory monitoring. Add to their rugged reliability the major benefits of simplified service and maintenance. Performance characteristics of these transmitters include excellent stability and repeatability (better than 0.02% FS). Transmitter span accommodates a 3:1 turndown ratio* to match the application pressure range (i.e. tank depth) and the 4-20 mAdc output is compatible with PLCs or other control architecture using analog I/O.
KING-GAGE ES2 transmitters are applicable to most tanks or process vessels whose contents remain at normal atmospheric pressure. They measure hydrostatic head pressure created by liquid depth in the tank and are unaffected by foaming or internal obstructions such as agitators. Unlike load cells, pressure based measurement has lower installation cost and is far simpler to maintain thus ensuring more reliable readings. 
Transmitters used in sanitary processing must often endure cycles of rapid temperature fluctuation. Washdown environments produce significant condensation on metallic surfaces that coupled with aggressive cleansing agents demand robust protection for these instruments. The ES2 transmitter's enhanced design uses encapsulation for full isolation of the internal electronics. This extends to the IP68 grade M12 signal connector that ensure integrity and long term reliability. You can be assured of a transmitter truly built for the demands and expectations of today's processing environment.
Sanitary Configurations
These sensors are especially suited to a wide range of sanitary applications on storage or continuous processing vessels. The 316 stainless diaphragm is appropriate for flush mount, clean-in-place installation employing an FDA-approved silicone rubber O-ring seal to achieve the crevice-free, positive compression seal between diaphragm and tank liner. Sanitary tank mountings include flush weld mountings with product contact surfaces of 316L stainless. (Quick disconnect sanitary adapters are also available for sensor mounting.)

*3:1 turndown ratio is applicable to 0-10 and 0-30 nominal range, refer to specifications for detailed span adjustment available on specific range models.
Mounting Options
Flush-mounting configurations are intended to meet the 3-A Sanitary Standards for clean-in-place applications. The ES2 transmitter fits directly into KING-GAGE tank shells or with an adapter on other manufacturers' mounting shells.

Installation Options
The KING-GAGE ES2 transmitter offers a choice of configurations to match your application needs. The integral stainless steel housing shown here includes a watertight connector for signal cable installation. Mounting lengths offered are intended to mate with tank fittings on non-insulated (singlewall) or insulated wall tanks. Adapters provide additional mounting options when retrofitting systems from other manufacturers.







LevelBAR Tank Level Indicator

• Visual Display of Tank Levels
• Custom Scale for Weight or Volume
• Direct Replacement for Manometer Gauges
• 4-20 mA output signal available to PLC 

The LevelBAR multi-segment LED column display includes an individualized scale calibrated to the actual tank capacity. Marked in any specified unit(s) of measurement, it permits direct reading of total liquid weight or volume. This unique analog column indicator works as a local or auxiliary remote display in new or retrofit applications.

Pneumatic input models include an integrated differential pressure (D/P) element. This allows LevelBAR to be used with bubblers or other air operated systems as a direct replacement for mercury tank gauges or other fluid-filled manometers. It even provides 4-20 mA output compatible with other receivers or to use for process control functions.



LP2 Multiple Tank Digital Indicator


•  8 Tank Multiple Channel Capacity
•  Operator Interface Display & Keypad
•  RS-485 Multidrop Communications

LP2 Multiple Tank Indicators expresses tank level directly in engineering units. Referencing a capacity profile to correlate transmitter output to actual tank geometry, the indicator formats the resulting value directly as the total weight or volume of liquid in the tank. LP2 Multiple Tank Indicator provides an operator interface keypad for access to function selection and density adjustments. There are no user conversion factors involved or scaling points to enter. All application details are factory programmed into an innovative nonvolatile modular memory called the Datapack iButton.

LP2 multiple tank indicators accept up to eight input channels that receive proportional 4-20 mA signals from liquid level transmitters. The actual sensor used to detect hydrostatic pressure created by liquid depth can be either electronic or pneumatic (using an electronic pressure transmitter to convert the sensor's pneumatic signal into 4-20 mA output).

LP2 multiple tank indicators can be used to eliminate analog I/O at your PLC or PC-based control system. As data acquisition hubs, each LP2 tank level indicator provides multiple point serial communications. An expandable network of up to 32 discrete indicators can be installed on a single two wire network (RS-485) for total of 256 possible input channels. Dual serial ports support multiple network configurations including query-response communications with a computer (or PLC), remote satellite displays, or interface to a KING-GAGE® LP3 system.



Contact Flow Factor HERE.
216-765-4231