Emerson Penberthy Liquid Jet Pumps

Penberthy Liquid Motive Jet Pumps - LL Low Head Series Eductor

** Buy from Flow Factor HERE! **

Practical, simple, and cost-effective alternatives for process industries to pump, mix or heat a range of liquids and gases with a variety of motive media.

Penberthy 1/2 inch Jet Pump

Bronze Material

LL-4ABZCNTNTNT-01 1/2A Size in Bronze

LL-4BBZCNTNTNT-01 1/2B Size in Bronze

LL-04BZCNTNTNT-01 1/2 Inch size in Bronze

LL-06BZCNTNTNT-01 3/4 Inch size in Bronze

LL-08BZCNTNTNT-01 1 Inch size in Bronze

LL-10BZCNTNTNT-01 1-1/4 Inch size in Bronze

LL-12BZCNTNTNT-01 1-1/2 Inch size in Bronze

LL-16BZCNTNTNT-01 2 Inch size in Bronze

LL-20BZCNTNTNT-01 2-1/2 Inch size in Bronze

LL-24BZCNTNTNT-01 3 Inch size in Bronze

LL-32BZCNTFFFF-01 4 Inch size in Bronze

Cast Iron Material

LL-4AIRCNTNTNT-01 1/2A Size in Cast Iron

LL-4BIRCNTNTNT-01 1/2B Size in Cast Iron

LL-04IRCNTNTNT-01 1/2" Size in Cast Iron

LL-06IRCNTNTNT-01 3/4" Size in Cast Iron

LL-08IRCNTNTNT-01 1" Size in Cast Iron

LL-10IRCNTNTNT-01 1-1/4" Size in Cast Iron

LL-12IRCNTNTNT-01 1-1/2" Size in Cast Iron

LL-16IRCNTNTNT-01 2" Size in Cast Iron

LL-20IRCNTNTNT-01 2-1/2" Size in Cast Iron

LL-24IRCNTNTNT-01 3" Size in Cast Iron

LL-32IRCNTFFFF-01 4" Size in Cast Iron

Emerson Penberthy LL Jet Pump

Buy from Flow Factor HERE!

Carbon Steel Material

LL-4ACSCNTNTNT-01       1/2A Size in Carbon Stl.

LL-4BCSCNTNTNT-01 1/2B Size in Carbon Stl.

LL-04CSCNTNTNT-01 1/2" Size in Carbon Stl.

LL-06CSCNTNTNT-01 3/4" Size in Carbon Stl.

LL-08CSCNTNTNT-01 1" Size in Carbon Stl.

LL-10CSCNTNTNT-01 1-1/4"Size in Car. Stl.

LL-12CSCNTNTNT-01 1-1/2" Size in Car. Stl.

LL-16CSCNTNTNT-01 2" Size in Carbon Stl.

LL-20CSCNTNTNT-01 2-1/2" Size in Car. Stl.

LL-24CSCNTNTNT-01 3" Size in Carbon Stl.

LL-32CSCNTFFFF-01 4" Size in Carbon Stl.

Carbon Steel Material

LL-4ASSCNTNTNT-01       1/2A Size in STNL. Stl.

LL-4BSSCNTNTNT-01 1/2B Size in STNL. Stl.

LL-04SSCNTNTNT-01 1/2" Size in STNL. Stl.

LL-06SSCNTNTNT-01 3/4" Size in STNL. Stl.

LL-08SSCNTNTNT-01 1" Size in STNL. Stl.

LL-10SSCNTNTNT-01 1-1/4"Size in STNL. Stl.

LL-12SSCNTNTNT-01 1-1/2" Size in STNL. Stl.

LL-16SSCNTNTNT-01 2" Size in STNL. Stl.

LL-20SSCNTNTNT-01 2-1/2" Size in STNL. Stl.

LL-24SSCNTNTNT-01 3" Size in STNL. Stl.

LL-32SSCNTFFFF-01 4" Size in STNL. Stl. Available in Hastelloy, Monel, PVC, Poly Pro and Kynar as well. Special Quote required.  CLICK HERE for quote.

Features

• Simple design with no moving parts to wear out.
• No lubrication required.
• Virtually maintenance-free.
• Easy to install without special structures or foundations.
• Self-priming.
• Cast, fabricated or non-metallic constructions.
• Variety of materials to suit specific characteristics of the process liquids.
• Critical flow paths machined smoothly with no abrupt turns or steps, producing the most efficient flow during the motive function.

Buy from Flow Factor HERE!

Flow Factor

216-765-4231

www.flowfactor.com

Emerson GH series Gas/Steam Jet Pumps

Gas Motive High Head (GH Series) Emerson Jet Pumps from Flow Factor

Buy Penberthy Emerson GH Series Eductors HERE!

Features of Emerson Penberthy Jet Pumps (Eductors)
• Simple design with no moving parts to wear out. • No lubrication required.
• Virtually maintenance-free.
• Easy to install without special structures or foundations.
• Self-priming.
• Cast, fabricated or non-metallic constructions.
• Variety of materials to suit specific characteristics of the process liquids.
• Critical flow paths machined smoothly with
  no abrupt turns or steps, producing the most efficient flow during the motive function.

General Application 

Suitable for a broad range of applications including: handling condensate, pumping wells, circulating solutions, emptying cesspools, pumping brine solutions, extracting solvents, draining cellars, pumping out barges, acidifying, causticizing oils, producing emulsions,elevation water.

Technical Data
Materials: Bronze, iron, carbon steel, 316 SS, PVC, CPVC, PP, PVDF
Sizes: 1⁄2” to 12”
Pressure range: 15 to 200 psig (1 to 13.8 barg)
Temperature(max): 200°F(93°C) 

Emerson Penberthy GH Series Gas Motive Jet Pump

Size (Inches)	Emerson HASTELLOY C GH (High Head) Series Eductors / Jet Pumps
1/2A	GH-4AHC
1/2B	GH-4BHC
1/2	GH-04HC
3/4	GH-06HC
1	GH-08HC
1 1/4	GH-10HC
1 1/2	GH-12HC
2	GH-16HC
2 1/2	GH-20HC
3	GH-24HC
4	GH-32HC

Size (Inches)	Emerson Bronze GL (High Head) Series Eductors / Jet Pumps
1/2A	GH-4ABZ
1/2B	GH-4BBZ
1/2	GH-04BZ
3/4	GH-06BZ
1	GH-08BZ
1 1/4	GH-10BZ
1 1/2	GH-12BZ
2	GH-16BZ
2 1/2	GH-20BZ
3	GH-24BZ
4	GH-32BZ
Size (Inches)	Emerson Penberthy Cast Iron GL (High Head) Series Eductors / Jet Pumps
1/2A	GH-4AIR
1/2B	GH-4BIR
1/2	GH-04IR
3/4	GH-06IR
1	GH-08IR
1 1/4	GH-10IR
1 1/2	GH-12IR
2	GH-16IR
2 1/2	GH-20IR
3	GH-24IR
4	GH-32IR
Size (Inches)	Emerson Penberthy Carbon Steel GL (High Head) Series Eductors / Jet Pumps
1/2A	GH-4ACS
1/2B	GH-4BCS
1/2	GH-04CS
3/4	GH-06CS
1	GH-08CS
1 1/4	GH-10CS
1 1/2	GH-12CS
2	GH-16CS
2 1/2	GH-20CS
3	GH-24CS
4	GH-32CS
Size (Inches)	Emerson Stainless Steel GL (High Head) Series Eductors / Jet Pumps
1/2A	GH-4ASS
1/2B	GH-4BSS
1/2	GH-04SS
3/4	GH-06SS
1	GH-08SS
1 1/4	GH-10SS
1 1/2	GH-12SS
2	GH-16SS
2 1/2	GH-20SS
3	GH-24SS
4	GH-32SS

Size (Inches)	Emerson MONEL GH (High Head) Series Eductors / Jet Pumps
1/2A	GH-4AMO
1/2B	GH-4BMO
1/2	GH-04MO
3/4	GH-06MO
1	GH-08MO
1 1/4	GH-10MO
1 1/2	GH-12MO
2	GH-16MO
2 1/2	GH-20MO
3	GH-24MO
4	GH-32MO

GAS MOTIVE (AIR/STEAM) Jet Pumps for Pumping or mixing Liquids or gases up to 50 psi discharge head pressure

Operation for Penberthy Emerson Gas Jet Pumps
All Emerson jet pumps operate on the principle of a fluid entraining a second fluid. Although design and construction may vary, this applies to all jet pumps.
All Emerson jet pumps have three common features: inlet, suction and discharge. They function as follows:
Inlet - The operating medium (liquid or steam) under pressure enters the inlet and travels through the nozzle into the suction chamber. The nozzle converts the pressure of the operating medium into a high velocity stream, which passes from the discharge side of the inlet nozzle.
Suction - Pumping action begins when vapor, gases or liquid in the suction chamber are entrained by the high velocity stream emerging from the inlet nozzle, lowering the pressure in the suction chamber. The resulting action causes the liquid, gas or vapor in the suction chamber to flow toward the discharge.
Discharge - The entrained material from the suction system mixes with the operating medium and acquires part of its energy in the parallel section. In the diffuser section, part of the velocity of the mixture is converted to a pressure greater than the suction pressure, but lower than the operating medium pressure. 

Buy Penberthy Emerson GH Series Eductors HERE!

ALL Emerson Penberthy Jets can be found HERE!

Flow Factor
www.flowfactor.com

GH High Head Series Jet Pumps Eductors from Emerson Penberthy 

Emerson GL (Gas Motive) Jet Pumps

Gas Motive Low Head (GL Series) Emerson Jet Pumps from Flow Factor

Buy Penberthy Emerson GL Series Eductors HERE!

Features of Emerson Penberthy Jet Pumps (Eductors)
• Simple design with no moving parts to wear out. • No lubrication required.
• Virtually maintenance-free.
• Easy to install without special structures or foundations.
• Self-priming.
• Cast, fabricated or non-metallic constructions.
• Variety of materials to suit specific characteristics of the process liquids.
• Critical flow paths machined smoothly with
  no abrupt turns or steps, producing the most efficient flow during the motive function.

General Application 

Suitable for a broad range of applications including: handling condensate, pumping wells, circulating solutions, emptying cesspools, pumping brine solutions, extracting solvents, draining cellars, pumping out barges, acidifying, causticizing oils, producing emulsions,elevation water.

Technical Data
Materials: Bronze, iron, carbon steel, 316 SS, PVC, CPVC, PP, PVDF
Sizes: 1⁄2” to 12”
Pressure range: 15 to 200 psig (1 to 13.8 barg)
Temperature(max): 200°F(93°C) 

Emerson Penberthy GL Series Jet Pump

Size (Inches)	Emerson HASTELLOY C GL (Low Head) Series Eductors / Jet Pumps
1/2A	GL-4AHC
1/2B	GL-4BHC
1/2	GL-04HC
3/4	GL-06HC
1	GL-08HC
1 1/4	GL-10HC
1 1/2	GL-12HC
2	GL-16HC
2 1/2	GL-20HC
3	GL-24HC
4	GL-32HC

Size (Inches)	Emerson Bronze GL (Low Head) Series Eductors / Jet Pumps
1/2A	GL-4ABZ
1/2B	GL-4BBZ
1/2	GL-04BZ
3/4	GL-06BZ
1	GL-08BZ
1 1/4	GL-10BZ
1 1/2	GL-12BZ
2	GL-16BZ
2 1/2	GL-20BZ
3	GL-24BZ
4	GL-32BZ
Size (Inches)	Emerson Penberthy Cast Iron GL (Low Head) Series Eductors / Jet Pumps
1/2A	GL-4AIR
1/2B	GL-4BIR
1/2	GL-04IR
3/4	GL-06IR
1	GL-08IR
1 1/4	GL-10IR
1 1/2	GL-12IR
2	GL-16IR
2 1/2	GL-20IR
3	GL-24IR
4	GL-32IR
Size (Inches)	Emerson Penberthy Carbon Steel GL (Low Head) Series Eductors / Jet Pumps
1/2A	GL-4ACS
1/2B	GL-4BCS
1/2	GL-04CS
3/4	GL-06CS
1	GL-08CS
1 1/4	GL-10CS
1 1/2	GL-12CS
2	GL-16CS
2 1/2	GL-20CS
3	GL-24CS
4	GL-32CS
Size (Inches)	Emerson Stainless Steel GL (Low Head) Series Eductors / Jet Pumps
1/2A	GL-4ASS
1/2B	GL-4BSS
1/2	GL-04SS
3/4	GL-06SS
1	GL-08SS
1 1/4	GL-10SS
1 1/2	GL-12SS
2	GL-16SS
2 1/2	GL-20SS
3	GL-24SS
4	GL-32SS

GAS MOTIVE (AIR/STEAM) Jet Pumps for Pumping or mixing Liquids or gases up to 50 psi discharge head pressure

Operation for Penberthy Emerson Gas Jet Pumps
All Emerson jet pumps operate on the principle of a fluid entraining a second fluid. Although design and construction may vary, this applies to all jet pumps.
All Emerson jet pumps have three common features: inlet, suction and discharge. They function as follows:
Inlet - The operating medium (liquid or steam) under pressure enters the inlet and travels through the nozzle into the suction chamber. The nozzle converts the pressure of the operating medium into a high velocity stream, which passes from the discharge side of the inlet nozzle.
Suction - Pumping action begins when vapor, gases or liquid in the suction chamber are entrained by the high velocity stream emerging from the inlet nozzle, lowering the pressure in the suction chamber. The resulting action causes the liquid, gas or vapor in the suction chamber to flow toward the discharge.
Discharge - The entrained material from the suction system mixes with the operating medium and acquires part of its energy in the parallel section. In the diffuser section, part of the velocity of the mixture is converted to a pressure greater than the suction pressure, but lower than the operating medium pressure. 

Buy Penberthy Emerson GL Series Eductors HERE!

ALL Emerson Penberthy Jets can be found HERE!

Flow Factor
www.flowfactor.com

Low Head Series GL Emerson Penberthy Jet Pumps Eductors

Penberthy CTE Mixing Eductors

Emerson/Penberthy CTE ejectors from Flow Factor

Note: 3/8, 1/2 and 3/4 inch CTEs have male NPT threads.
All the larger sizes have Female NPT threads.

Shop for CTE educators HERE.

A predetermined amount of liquid (called operating fluid) is pumped through a header to one or more CTEs submerged inside the tank. Depending on the application, the operating fluid can be liquid drawn from the tank or it can be a secondary liquid from another source that is to be mixed with the tank contents. As the operating fluid leaves the nozzle of the CTE, it entrains material from the tank. The operating fluid and entrained material are mixed thoroughly inside the parallel section of the CTE before being discharged. The discharge flow, or plume, continues the mixing, agitation and circulation of the liquid throughout the tank. 

CTEs can handle a variety of viscosities and types of liquid, including slurries and suspensions. Their thorough mixing action makes them especially useful for maintaining uniform liquid characteristics such as temperature, pH or solids distribution throughout the tank contents.
The CTE is also used to prevent separation of non-mixable liquids or stratification of liquids having different specific gravities.
They allow the use of a smaller recirculating pump than normally would be needed to move a given volume of liquid. This saves energy while providing more effective mixing and circulation. They are available in materials to suit a variety of applications in food, chemical, refining and other process industries. 

Features

• Simple design with no moving parts to wear out.
• Enable the use of a smaller recirculating/transfer pump.
• Inherently non-clogging.
• No lubrication required.
• Virtually maintenance-free.
• Easy to install without special structures or foundations.
• Cast, fabricated or non-metallic constructions.

CTE's can be made in:

CS - Carbon Steel

IR - Cast Iron (3/8" - 3" only)

SS - 316 SST

HC - Hastelloy C (3/8" - 4" only)

MO - Monel (3/8" - 4" only)

BZ - Bronze (3/8" - 3" only)

PP- PPL (3/8",3/4",1 1/2" only)

PV- PVC (3/8" - 3" only)

KY- Kynar (3/8" - 4" only)

3/8 inch Circulating Tank Eductors

Penberthy Circulating Tank Eductor, Bronze, 3/8 Inch

3/8CTEBR -- CTE03BZCNT-01

Penberthy Circulating Tank Eductor, Carbon Steel, 3/8 Inch

3/8CTECS -- CTE03CSCNT-01

Penberthy Circulating Tank Eductor, Stainless Steel, 3/8 Inch

3/8CTEBSS- CTE03SSCNT-01

Penberthy Circulating Tank Eductor, Cast Iron, 3/8 Inch

3/8CTECI -- CTE03IRCNT-01

Penberthy Circulating Tank Eductor, Poly Pro, 3/8 Inch

3/8CTEPP -- CTE03PPCNT-01

Penberthy Circulating Tank Eductor, PVC, 3/8 Inch

3/8CTEPVC -- CTE03PVCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

3/8CTEHA -- CTE03HCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

3/8CTEMO -- CTE03MONT-01

1/2 inch Circulating Tank Eductors

Penberthy Circulating Tank Eductor, Bronze, 3/8 Inch

1/2CTEBR -- CTE04BZCNT-01

Penberthy Circulating Tank Eductor, Carbon Steel, 3/8 Inch

1/2CTECS -- CTE04CSCNT-01

Penberthy Circulating Tank Eductor, Stainless Steel, 3/8 Inch

3/8CTEBSS- CTE04SSCNT-01

Penberthy Circulating Tank Eductor, Cast Iron, 3/8 Inch

1/2CTECI -- CTE04IRCNT-01

Penberthy Circulating Tank Eductor, Poly Pro, 3/8 Inch

1/2CTEPP -- CTE04PPCNT-01

Penberthy Circulating Tank Eductor, PVC, 3/8 Inch

1/2CTEPVC -- CTE04PVCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

1/2CTEHA -- CTE04HCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

1/2CTEMO -- CTE04MONT-01

3/4 inch Circulating Tank Eductors

Penberthy Circulating Tank Eductor, Bronze, 3/8 Inch

3/4CTEBR -- CTE06BZCNT-01

Penberthy Circulating Tank Eductor, Carbon Steel, 3/8 Inch

3/4CTECS -- CTE06CSCNT-01

Penberthy Circulating Tank Eductor, Stainless Steel, 3/8 Inch

3/4CTEBSS- CTE006SSCNT-01

Penberthy Circulating Tank Eductor, Cast Iron, 3/8 Inch

3/4CTECI -- CTE06IRCNT-01

Penberthy Circulating Tank Eductor, Poly Pro, 3/8 Inch

3/4CTEPP -- CTE06PPCNT-01

Penberthy Circulating Tank Eductor, PVC, 3/8 Inch

3/4CTEPVC -- CTE06PVCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

3/4CTEHA -- CTE06HCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

3/4CTEMO -- CTE06MONT-01

1 inch Circulating Tank Eductors

Penberthy Circulating Tank Eductor, Bronze, 3/8 Inch

1CTEBR -- CTE08BZCNT-01

Penberthy Circulating Tank Eductor, Carbon Steel, 3/8 Inch

1CTECS -- CTE08CSCNT-01

Penberthy Circulating Tank Eductor, Stainless Steel, 3/8 Inch

1CTEBSS- CTE008SSCNT-01

Penberthy Circulating Tank Eductor, Cast Iron, 3/8 Inch

1CTECI -- CTE08IRCNT-01

Penberthy Circulating Tank Eductor, Poly Pro, 3/8 Inch

1CTEPP -- CTE08PPCNT-01

Penberthy Circulating Tank Eductor, PVC, 3/8 Inch

1CTEPVC -- CTE08PVCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

1CTEHA -- CTE08HCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

1CTEMO -- CTE08MONT-01

Shop for CTE educators HERE.

1-1/2 inch Circulating Tank Eductors

Penberthy Circulating Tank Eductor, Bronze, 3/8 Inch

1-1/2CTEBR -- CTE12BZCNT-01

Penberthy Circulating Tank Eductor, Carbon Steel, 3/8 Inch

1-1/2CTECS -- CTE12CSCNT-01

Penberthy Circulating Tank Eductor, Stainless Steel, 3/8 Inch

1-1/2CTEBSS- CTE12SSCNT-01

Penberthy Circulating Tank Eductor, Cast Iron, 3/8 Inch

1-1/2CTECI -- CTE12IRCNT-01

Penberthy Circulating Tank Eductor, Poly Pro, 3/8 Inch

1-1/2CTEPP -- CTE12PPCNT-01

Penberthy Circulating Tank Eductor, PVC, 3/8 Inch

1-1/2CTEPVC -- CTE12PVCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

1-1/2CTEHA -- CTE12HCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

1-1/2CTEMO -- CTE12MONT-01

2 inch Circulating Tank Eductors

Penberthy Circulating Tank Eductor, Bronze, 3/8 Inch

2CTEBR -- CTE16BZCNT-01

Penberthy Circulating Tank Eductor, Carbon Steel, 3/8 Inch

2CTECS -- CTE16CSCNT-01

Penberthy Circulating Tank Eductor, Stainless Steel, 3/8 Inch

2CTEBSS- CTE16SSCNT-01

Penberthy Circulating Tank Eductor, Cast Iron, 3/8 Inch

2CTECI -- CTE16IRCNT-01

Penberthy Circulating Tank Eductor, Poly Pro, 3/8 Inch

2CTEPP -- CTE16PPCNT-01

Penberthy Circulating Tank Eductor, PVC, 3/8 Inch

2CTEPVC -- CTE16PVCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

2CTEHA -- CTE16HCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

2CTEMO -- CTE16MONT-01

3 inch Circulating Tank Eductors

Penberthy Circulating Tank Eductor, Bronze, 3/8 Inch

3CTEBR -- CTE24BZCNT-01

Penberthy Circulating Tank Eductor, Carbon Steel, 3/8 Inch

3CTECS -- CTE24CSCNT-01

Penberthy Circulating Tank Eductor, Stainless Steel, 3/8 Inch

3CTEBSS- CTE24SSCNT-01

Penberthy Circulating Tank Eductor, Cast Iron, 3/8 Inch

3CTECI -- CTE24IRCNT-01

Penberthy Circulating Tank Eductor, Poly Pro, 3/8 Inch

3CTEPP -- CTE24PPCNT-01

Penberthy Circulating Tank Eductor, PVC, 3/8 Inch

3CTEPVC -- CTE24PVCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

3CTEHA -- CTE24HCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

3CTEMO -- CTE24MONT-01

4 inch Circulating Tank Eductors

Penberthy Circulating Tank Eductor, Bronze, 3/8 Inch

4CTEBR -- CTE32BZCNT-01

Penberthy Circulating Tank Eductor, Carbon Steel, 3/8 Inch

4CTECS -- CTE32CSCNT-01

Penberthy Circulating Tank Eductor, Stainless Steel, 3/8 Inch

4CTEBSS- CTE32SSCNT-01

Penberthy Circulating Tank Eductor, Cast Iron, 3/8 Inch

4CTECI -- CTE32IRCNT-01

Penberthy Circulating Tank Eductor, Poly Pro, 3/8 Inch

4CTEPP -- CTE32PPCNT-01

Penberthy Circulating Tank Eductor, PVC, 3/8 Inch

4CTEPVC -- CTE32PVCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

4CTEHA -- CTE32HCNT-01

Penberthy Circulating Tank Eductor, Hastelloy C, 3/8 Inch

4CTEMO -- CTE32MONT-01

Penberthy CTE Eductor

Shop for CTE educators HERE.


Flow Factor
216-765-4231
www.flowfactor.com