Emerson Penberthy Liquid Jet Pumps

Penberthy Liquid Motive Jet Pumps - LL Low Head Series Eductor

** Buy from Flow Factor HERE! **

Practical, simple, and cost-effective alternatives for process industries to pump, mix or heat a range of liquids and gases with a variety of motive media.

Penberthy 1/2 inch Jet Pump

Bronze Material

LL-4ABZCNTNTNT-01 1/2A Size in Bronze

LL-4BBZCNTNTNT-01 1/2B Size in Bronze

LL-04BZCNTNTNT-01 1/2 Inch size in Bronze

LL-06BZCNTNTNT-01 3/4 Inch size in Bronze

LL-08BZCNTNTNT-01 1 Inch size in Bronze

LL-10BZCNTNTNT-01 1-1/4 Inch size in Bronze

LL-12BZCNTNTNT-01 1-1/2 Inch size in Bronze

LL-16BZCNTNTNT-01 2 Inch size in Bronze

LL-20BZCNTNTNT-01 2-1/2 Inch size in Bronze

LL-24BZCNTNTNT-01 3 Inch size in Bronze

LL-32BZCNTFFFF-01 4 Inch size in Bronze

Cast Iron Material

LL-4AIRCNTNTNT-01 1/2A Size in Cast Iron

LL-4BIRCNTNTNT-01 1/2B Size in Cast Iron

LL-04IRCNTNTNT-01 1/2" Size in Cast Iron

LL-06IRCNTNTNT-01 3/4" Size in Cast Iron

LL-08IRCNTNTNT-01 1" Size in Cast Iron

LL-10IRCNTNTNT-01 1-1/4" Size in Cast Iron

LL-12IRCNTNTNT-01 1-1/2" Size in Cast Iron

LL-16IRCNTNTNT-01 2" Size in Cast Iron

LL-20IRCNTNTNT-01 2-1/2" Size in Cast Iron

LL-24IRCNTNTNT-01 3" Size in Cast Iron

LL-32IRCNTFFFF-01 4" Size in Cast Iron

Emerson Penberthy LL Jet Pump

Buy from Flow Factor HERE!

Carbon Steel Material

LL-4ACSCNTNTNT-01       1/2A Size in Carbon Stl.

LL-4BCSCNTNTNT-01 1/2B Size in Carbon Stl.

LL-04CSCNTNTNT-01 1/2" Size in Carbon Stl.

LL-06CSCNTNTNT-01 3/4" Size in Carbon Stl.

LL-08CSCNTNTNT-01 1" Size in Carbon Stl.

LL-10CSCNTNTNT-01 1-1/4"Size in Car. Stl.

LL-12CSCNTNTNT-01 1-1/2" Size in Car. Stl.

LL-16CSCNTNTNT-01 2" Size in Carbon Stl.

LL-20CSCNTNTNT-01 2-1/2" Size in Car. Stl.

LL-24CSCNTNTNT-01 3" Size in Carbon Stl.

LL-32CSCNTFFFF-01 4" Size in Carbon Stl.

Carbon Steel Material

LL-4ASSCNTNTNT-01       1/2A Size in STNL. Stl.

LL-4BSSCNTNTNT-01 1/2B Size in STNL. Stl.

LL-04SSCNTNTNT-01 1/2" Size in STNL. Stl.

LL-06SSCNTNTNT-01 3/4" Size in STNL. Stl.

LL-08SSCNTNTNT-01 1" Size in STNL. Stl.

LL-10SSCNTNTNT-01 1-1/4"Size in STNL. Stl.

LL-12SSCNTNTNT-01 1-1/2" Size in STNL. Stl.

LL-16SSCNTNTNT-01 2" Size in STNL. Stl.

LL-20SSCNTNTNT-01 2-1/2" Size in STNL. Stl.

LL-24SSCNTNTNT-01 3" Size in STNL. Stl.

LL-32SSCNTFFFF-01 4" Size in STNL. Stl. Available in Hastelloy, Monel, PVC, Poly Pro and Kynar as well. Special Quote required.  CLICK HERE for quote.

Features

• Simple design with no moving parts to wear out.
• No lubrication required.
• Virtually maintenance-free.
• Easy to install without special structures or foundations.
• Self-priming.
• Cast, fabricated or non-metallic constructions.
• Variety of materials to suit specific characteristics of the process liquids.
• Critical flow paths machined smoothly with no abrupt turns or steps, producing the most efficient flow during the motive function.

Buy from Flow Factor HERE!

Flow Factor

216-765-4231

www.flowfactor.com

Penberthy GH/GL Eductors for Gases

Penberthy/Pentair GL/GH Eductors (jet pumps) for pumping/heating with gas from Flow Factor

Pumping gases using a liquid or gas (steam or air) motive is an effective means of exhausting, evacuating and priming and can be used in a wide variety of operations and industries. These Pentair Penberthy Jet Pumps offer many advantages over other methods of moving gases; they have no moving parts and provide a very simple cost effective method of handling a wide variety of gases and processes. These units are used for all aspects of water treatment, refrigeration, petroleum, petro chemical, brewing, distilling and general process industries.

Features & Benefits:

• Simple two-piece construction
• No moving parts to wear out
• No lubrication
• Wide variety of special material to suit the most diverse applications
• Virtually maintenance free
• Cost effective and inexpensive
• No power or special installation requirements  

Sizes: 1/2” to 12”
Threaded (Standard) or flanged connections

Operating Pressure Range 20 to 200 psig

Application Range, inches HG. ABS. 0.5 to 30

Materials:
Bronze, Ductile Iron, Carbon Steel, Stainless Steel, PVC, PP, PVDF
Wide variety of special materials also available  

Penberthy jet pumps can also use steam or a gas (air) as the operating media for exhausting, evacuating or priming operations. Primary uses of these types of pumps are for exhausting or evacuating gases. Exhausting means removing gases from an area at a continuous rate while maintaining pressure at a constant level. Evacuation means drawing gases from a defined volume by pumping the vessel down from an initial pressure to a final lower pressure. These steam/gas motive jet pumps meet the industry's most stringent requirements, while providing a simple, low-cost method of transporting gases, operating flawlessly even in the harshest work environments.

Penberthy Models GL and GH operate at pressures from 20 to 120 psig (140 to 830 kPag), the overall capacity being slightly higher when using air as the operating media. U and L Models are single-stage ejectors while the 2NC is a two-stage, non-condensing ejector using steam as the operating media. All these units provide maintenance-free pumping capabilities.

Some uses for steam/gas motive jet pumps include: creating vacuums, exhausting vapors from process systems, evacuating tanks & vessels, priming, fume removal, fluid concentration, humidifying and drying. Industries that could benefit from the use of the jet pumps might include: chemical processing, textile manufacturing, food processing, petroleum production & refining, sterilization and HVAC.

Typical applications involve either exhausting or evacuating. Similar information is needed in order to determine the specific jet pump for your application. Using the information required (listed below), fill out an application form and submit to Penberthy sales representative or the factory to determine the correct pump for your needs.

If Exhausting (Continuous Suction Flow) Motive: Gas/Steam Pressure (Available) Flow Rate (Available volume-scfm) Temperature Molecular Weight (Gas only) Suction: Pressure (Inches Hg Abs-kg/sq cm Abs) Flow Rate-scfm Temperature Molecular Weight Discharge: Pressure (That unit must overcome) If Evacuating (Sealed Vessel-Pump Down) Volume of Space to Evacuate Required Evacuation Time (Minutes) MOTIVE: This function is the power phase of the pumping operation. At this stage, the velocity of the motive media increases as it passes through a nozzle. This phase of the pumping operation takes advantage of the kinetic properties of the motive media, whether it is liquid, steam or gas. Because of this, design differences may exist within the motive connection of the jet pump. For instance, jet pumps with liquid motives use a converging nozzle, since liquids usually cannot be compressed. On the other hand, jet pumps with gas or steam motives use converging/diverging nozzles to achieve trans-sonic flow velocity. The critical flow paths of all Penberthy jet pumps are smoothly machined with no abrupt turns or steps in order to produce the most efficient flow during the motive function. Without this direct flow design and smooth interior surface, the jet pump would not operate at peak efficiency. SUCTION: This connection of the jet pump is where the pumping action takes place. The high velocity stream of the motive causes a drop in pressure in the suction chamber. This allows pressure in the suction vessel to push a liquid, steam or gas into the suction chamber of the jet pump. This, in turn, is entrained by the high-velocity motive stream emerging from the inlet nozzle DISCHARGE: As the motive flow combines with the suction medium, some kinetic energy of the MOTIVE is transferred to the SUCTION, mixing and discharging at a reduced pressure. The amount of pressure that can be recovered depends on the ratio of the MOTIVE flow to SUCTION flow, plus the amount of SUCTION pressure built up in the suction vessel. Kinetic energy is converted back to pressure as the mixed media passes through the diverging taper and is discharged out the pump.

GL series jets have a motive pressure range of 60-120 psig and suction range of 6-30 inches.
GH series jets have a motive pressure range of 20-80 psig and a suction range of 6.5-30 inches.
Cast eductors can be made from 1/2 inch size to 4 inch size.
Fabricated eductors are 4 inches and up.
Non-Metallic are 1/2 to 3 inch size, these are PVC, Poly Pro, and Kynar.
The common metals are Cast Iron, Low Lead Bronze, Carbon Steel and 316L Stainless Steel.

www.flowfactor.com
866-360-9830

Penberthy 1/2A GH Jet Pump (Eductor)

Flow Factor has in Stock:

1/2A GH Jet Pump / Eductor in Bronze.

Pentair / Penberthy part number 7000167772

Eductor Model number  GH-4ABZCNTNTNT-01

FLOW FACTOR MODEL NUMBER  1/2AGHBR

CLICK TO ORDER HERE


CLICK HERE  FOR  THE  JET  PUMP/EDUCTOR  MAIN PAGE ON FLOW FACTOR.

866-360-9830
info@flowfactor.com

Penberthy Jet Pump Applications

Flow Factor Sells Penberthy Jet Pumps / Eductors

Terms

• Motive - the fluid used to "power" the eductor
• Suction - the secondary fluid being educted
• Discharge - the combined motive/suction fluid stream exiting the eductor

LL Jet - Liquid motive / Low Head

LM Jet - Liquid Motive / Medium Head 

LH Jet - Liquid Motive / High Head

GL Jet - Gas Motive / Low Head

GH Jet - Gas Motive / High Head

ELL Jet - Heating Liquids

CTE Jet - In Tank mixing and heating eductor

Problems/Solutions Using Jet Pumps

Below are listed some of the problems encountered by our users in different industries and the solutions that were used to solve these problems. These industries include:
Water/Waste Water Treatment Marina Automotive Food Processing Environmental Water Collection Pits Railway Mixing/Blending Barge Terminal Tank Heating Brewery Transporting Solids Corn Processing Heating Systems
Water/Waste Water Treatment:
Problem		A water treatment plant wanted to entrain activated carbon as a filtering media to treat and regenerate application material to meet EPA regulations prior to disposing in a sewer.
Solution		A Penberthy Model ELL was used to hydraulically transport the carbon media. Model LM could also have been used
Problem		A treatment facility needed to pump and mix a variety of chemicals in a water stream to control pH levels.
Solution		Using a Penberthy L Series liquid motive jet, they were able to do this in-line
Automotive Industry:
Problem		Assemblers had to hold windshields in place during assembly.
Solution		Using a Penberthy G Series jet, they were able to generate a vacuum to hold the windshield while it was positioned.
Problem		A tire manufacturer needed to evacuate steam from a bladder in order for the tire to be removed from the tire press.
Solution		A Penberthy G Series jet was installed to evacuate the steam and speed up the production cycle.
Problem		Settling of materials in electrocoat and pretreatment tanks in automotive paint lines had to be eliminated in order to improve overall paint quality.
Solution		Installation of Penberthy Model TME (Tank Mixing Eductors) provided low electrical conductivity and smooth mixing flow characteristics, improving paint finishes.
Environmental Ground Water Testing:
Problem		A chemist required an efficient method of extracting ground water samples for chemical analysis.
Solution		Using Penberthy Series L jet pumps, samples were taken and transferred to holding tanks for evaluation and testing.
Railcar Cleaning:
Problem		Railcars need an effective method of removing a variety of powdered materials.
Solution		A simple and effective method would be to use a Penberthy GST Model jet using compressed air as the motive
Barge Terminals/Barge Cleaning:
Problem		Barge terminal operators need a cost-effective method of removing rainwater from barges.
Solution		Penberthy Model L Series jet pumps are used to hydraulically pump the water from the barge. This water is transported into another barge for testing and treatment before being discharged back into the river.
Breweries:
Problem		A brewery needed to heat liquids as part of the pasteurization process.
Solution		Using a Penberthy Model SRH, the liquid was heated and pasteurized in-line. In this application, processing was improved by 30%.
Corn Processing Plants:
Problem		A corn processing plant needed an inexpensive and efficient method or removing carbon dust from the bottom of their furnaces.
Solution		They attached a perforated pipe to the suction inlet of a Penberthy Model LM jet, and using water as the motive, a vacuum was created sucking up the carbon dust.
Plastics Industries:
Problem		The company needed an effective means of detecting leaks in molds.
Solution		By using a Penberthy Model LM jet with the suction hooked up to the mold, they were able to generate a vacuum which detected leaks in the mold or seals.
Boat Docks:
Problem		Boats sitting in a marina during the winter months became immobilized due to ice buildup.
Solution		Using a Penberthy Model CTE, warmer water was brought to the surface preventing the water from freezing.
Food Processing:
Problem		A processor potato chips wanted to heat water in a blancher to remove potato skins.
Solution		A Penberthy Model SRH was installed at the bottom of a tank. The water draining from the tank had sufficient head pressure to mix with the steam to allow recirculation back into the tank as well as reaching desired temperature.
Water Collection Pits:
Problem		A number of businesses and homeowners needed an effective way to remove water from sump pits during flooding.
Solution		Penberthy Sump Drainer and L Series jets provided reliable methods of removing the water using no electrical power.
Mixing/Blending Applications:
Problem		A storage tank manufacturer needed to move dry solids - diatomaceous earth - into a blending tank.
Solution		Using a Penberthy Model LM with a Penberthy Washdown Hopper, they were able to mix the earth with the motive fluid and transport it into the blending tank. Once in the tank, a Penberthy Model CTE was used to provide continuous in-tank mixing.
Tank Heating:
Problem		A company needed to maintain a minimum liquid temperature in their tanks, regardless of outside ambient temperatures.
Solution		Using a Penberthy Model CTE as an in-tank heater in conjunction with a simple temperature control system, steam was mixed with the liquid when the outside temperature fell below a certain level.
Transporting Solids:
Problem		A manufacturer of silo systems for wastewater treatment that used wetting cones with powdered activated carbon needed a means of moving the resulting slurry.
Solution		By installing various Penberthy Series L liquid motive jets at the bottom of each cone, the manufacturer was able to move the slurry away using water as the motive.
Heating Systems:
Problem		Condensation pits associated with underground heating systems needed to be emptied.
Solution		A Penberthy model 2-R Sump Drainer was installed in each pit. This stand-alone system uses water as the motive and requires no electrical power. Visit Flow Factor for your Penberthy Jet Pump Needs

Flow Control Products from Flow Factor

Flow Factor provides Industry with Flow Control Products for Process and Liquid control.

Some of our products include Solenoid Valves, Pumps, Flow Sites, Level Controls, Eductors,Temperature Switches, Pressure switches, Meters, Gas Meters, Flow Meters, Floats and hot water heaters.

Some of our Brands include ASCO, Barksdale, Parker, Penberthy, Fenwal, SSAC, Carlo Gavazzi, Armstrong, MDI, American Meter, Dwyer, Ametek, Robertshaw, Process Technology and Princo.

Please call or email with your application. We can Help.

www.flowfactor.com

Contact Flow Factor

Penberthy Jet Pumps / Eductors

Simple Jet Pump Design Offers Economical Solutions for Many Complex Process Operations!

Providing a practical alternative to more complicated and expensive methods, Penberthy jet pumps offer simple, more cost-effective ways to pump, mix or heat a wide range of liquids and gases used in the process industry. Jet pumps can operate with a wide variety of motive liquids and gases. If you recognize any of the following, you can probably use a Penberthy jet pump.

• Injector • Eductors • Exhausters • Boosters • Ejectors • Kinematic Pumps • Siphons

Penberthy jet pumps have a myriad of uses. Jet pumps not only pump liquids, they can also heat, mix and blend either in-line or in-tank. Jet pumps can evacuate gases, create a vacuum, boost suction pressures, mix granular solids with liquids and move granular solids with compressed air. In fact, you will be suprised at what a jet pump can do to solve your problem. The purpose of this section and its associated pages is to identify the many uses for jet pumps, to identify pumps for specific processing operations and perhaps recognize new ways to use jet pumps to reduct costs and optimize your plant's efficiency. Penberthy invites you to explore the possibilities of jet pump use in your operation. You might be surprised at the many ways jet pumps can help improve your company's profitability! Penberthy jet pumps can provide a practical alternative to more complex - and costly - process components when a simple, cost-effective way to pump, mix or heat is the answer to your process need. Reliable operation from a variety of power sources allow jet pumps to perform effectively on a wide array of process applications. Not only can jet pumps be used to perform singular duties such as pumping liquids to drain sumps and tanks, or heating liquids in-tank for cooking or circulating, but they can also be used to achieve these functions simultaneously. For example, you can heat liquids as they are pumped for producing scalding sprays, or mix liquids in-tank while adding a second liquid at the same time. Simple operation While Penberthy jet pumps differ in appearance, all operate basically the same way. An operating fluid under pressure enters through the inlet and travels through the nozzle -- where it is converted to a high-velocity stream which decreases the air pressure in the suction chamber, creating a partial vacuum that draws material to that area where it is entrained by the operating medium. The entrained material is then carried through to the discharge outlet and dispelled at a pressure greater than that of the suction stream but lower than that of the operating medium. Inherent reliability The reliability of Penberthy jet pumps is inherent in their simple design: no moving parts, no required lubrication, little maintenance, easy installation without special structures or foundations. All are self-priming. And all Penberthy models are available in a variety of materials to maximize worry-free service life. A choice of operating sources Penberthy jet pumps let you choose the operating source that's most convenient for your application. These include aqueous and non-aqueous liquids, steam or even compressed gas. Economical sources which may already be available at your existing facility. And possibly more accessible than another power source such as electricity. General Listing of Applications Pumping Liquids with Liquid Pumping Liquids with Steam Pumping Gases with Steam/Gas Pumping Gases with Liquid Heating Liquids In-Tank Heating Liquids In-Line Mixing Liquids Transporting Solids Terms Motive - the fluid used to "power" the eductor Suction - the secondary fluid being educted Discharge - the combined motive/suction fluid stream exiting the eductor Standard Cast Materials of Construction Low Lead Bronze Iron Carbon Steel 316 STS Purchase Penberthy Jet Pumps at Flow Factor or call 866-360-9830

Flow Factor and Industrial Flow Products

Flow Factor sells products to control media in flow situations, tanks and pipes.

These products include solenoid valves, pressure switches, temperature switches, level control and switches, gauge, jet pumps and flow switches and monitoring.

Some of the products sold are ASCO, Parker, Ametek, Erdco, Penberthy, Process Technology, US Gauge, King and Robertshaw.

Rating the valve capacity in terms which apply to all operating conditions is accomplished by determining the "Flow Factor" (Cv) of the valve.
The Cv value is the number of U.S. gallons of water at 16°C (60°F) per minute that, when flowing through the valve, causes a pressure drop of 1 PSI.
There are five main parameters to consider when selecting a valve: Cv, media compatibility, pressure, temperature, and process fitting.

The flow factor or Cv can be very important in valve selection. The Cv can be used to compare valves to insure similar flow capacities.

Our Jet pumps or Eductors can be used to mix, heat, and pump medias without electrical power.
Site flows are used to give a visual indication of process flow.
Gauges are used to measure and give visual indication of temperatures, flows, and pressures.
Level control is used to monitor and measure levels in tanks and vessals.


Ametek-U.S. Gauge - U.S. Gauge is one of the world's leading suppliers of high quality, competitively priced pressure and temperature measurement products. Founded in 1904, USG's product offering includes bourdon tube and diaphragm capsule pressure gauges ranging in size from 1-1/2 inches to 6 inches; with brass, stainless steel, alloy steel or Monel internals.

ERDCO - ERDCO® offers a complete line of flowmeters, sight flow indicators, flow transmitters and flow indicating switches. We employ elegantly simple measuring technologies with proven reliability in utility fluid applications.

King Instruments - King Flowmeters provide exceptional performance in a wide range of industrial, commercial and specialty applications. King offers more styles, sizes, features and options to satisfy all your rotameter requirements.

ASCO General Controls - Solenoid Gas Valves, including Pilot Gas Shutoff Valves and Main Gas Shutoff Valves; Solenoid Oil Shutoff Valves; Hydramotor Oil Valves and Hydramotor Gas Valves.

Penberthy/Tyco Flow control - EDUCTORS / EJECTORS / JET PUMPS, LIQUID LEVEL GAGES & GAGECOCKS, MAGNETIC LIQUID LEVEL GAGES, SIGHT FLOW INDICATORS & SIGHT WINDOWS, ULTRASONIC LEVEL INSTRUMENTATION, BOILER TRIM / CONDUCTIVITY PROBES AND HIGH PRESSURE GLASS GAGES

Barksdale - Barksdale offers both mechanical and electronic pressure, temperature and level instrumentation solutions for all industrial applications.

Process Technology - Manufactured in an ISO 5 (class 100) cleanroom, these products include: UPDI water heaters, inline fluoropolymer and quartz chemical heaters, a large selection of fluoropolymer chemical bath systems, solvent heaters and nitrogen heaters. Semi S2/S3 and CE compliant; ETL/UL certified.

Robertshaw - Robertshaw offers RF capacitance level control technology for virtually any substance in any type of vessel. Solid state, digital designs offer on/off and continuous level measurement in all types of vessels. Using the power generated from the process, Robertshaw self-actuated regulators are simple, complete control units built to the highest quality specifications to assure satisfactory service for many years.

Please visit us at www.flowfactor.com