Valcor Valves Overstock Surplus

Over Stock Surplus Valcor Valves at Flow Factor

Buy HERE!


Valcor Solenoid Valve SV54C19P1A 120/60 - 1/4 inch
Valcor Valve SV54C19PIA 115/60 solenoid valve. Valve size is 1/4 inch. The Jefferson Valve SV54C19P1A is a Normally closed valve 120 max psi and buna N seals

Valcor Valve SV54C19PIA 115/60

Valcor Solenoid Valve SV321GF02N5CG4 120/60 - 3/8 inch
Valcor Valve SV321GF02N5CG4 115/60 solenoid valve. Valve size is 1/4 inch. The Valcor Valve SV321GF02N5CG4 is a Normally closed valve 4-200 psi fr Air and water and 4-150 for light oils and valve has buna N seals

Valcor part number is SV321GF02N5CG4

Valcor part number is SV321GF02N5CG4

Flow Factor
216-765-4231
info@flowfactor.com
www.flowfactor.com

Penberthy SRH Jet Pump

Penberthy Emerson SRH Jet Pumps/Injectors

from Flow Factor

The SRH (Steam Ring Heaters) are compact, inline jet pumps with low pressure drop. SRH units inject steam through a ring-shaped opening within an enlargement in the pipe line.  Liquid passes through and around the ring.  Heat is introduced by the direct condensation of the steam. The SRHs provide fast temperature correction noiselessly and without vibration if correctly applied. Because the liquid flow area is unrestricted, pressure drops across the SRH are minimized.  This will reduce the horsepower requirements for the operating pump.

The Emerson Penberthy SRH injectors provide liquid flow rates up to 500 GPM.  Temperature rises range up to 200 degrees F.  Heat input ranges up to 128,000 BTU per minute at 150 PSIG operating steam pressure. The Steam Ring Heater jets can be installed in either series or parallel arrangements for increased capacities.

The SRH units come in the below sizes.

Model 310 
Inlet is 1.5 inches, outlet is 1.5 inches and steam port is 1 inch.

Model 320
Inlet is 2 inches, outlet is 2 inches and steam port is 1.25 inches.

Model 330
Inlet is 3 inches, outlet is 3 inches and steam port is 1.50 inches.

Model 330F (Flanged)
Inlet is 3 inches, outlet is 3 inches and steam port is 1.50 inches.

Model 340  (Flanged)
Inlet is 6 inches, outlet is 6 inches and steam port is 2 inches.

216-765-4231
www.flowfactor.com
Cleveland Ohio USA

Jefferson Valves from Flow Factor

Jefferson Valves from Flow Factor

Now Lead Free!

General Purpose Valves for Water, Air and Light Oils
Natural Gas Valves (Combustion)
ZERO minimum pressure valves
3-way valves
Steam and Hot Water Valves

Jefferson Valves for Flow Control

Sizes from 1/8 inch to 3 inch valves.

Contact Flow Factor HERE


www.flowfactor.com
216-765-4231

Parker GP10A Solenoid Valve

Flow Factor stocks the Parker GP10A  (70810) 1 inch Solenoid Valve.

Parker Refrigeration Valve GP10A

Parker Premier Valve, GP10A is a General Purpose 1 inch valve, brass body, 1-150 psi for air, water and oil. The Parker After Market GP 10A has a Cv of 12.20 and a maximum temperature of 225. The GP 10A requires a G23 coil for operation. Parker model number is GP 10A ( 70810 ).



Flow Factor
216-765-4231
www.flowfactor.com

Fenwal Brass Switches Discontinued

Flow Factor announces that the brass Fenwal Thermoswitches are discontinued by Fenwal.
The brass switches have stainless steel versions and these are still available.  We are leaving the brass switches on the website but will ship the stainless versions if the brass are mistakingly ordered.  The Stainless Steel switches have a higher temperature rating of 600F whereas the brass were rated to 400F.  Both have a lower limit of -100F. All dimensions and features are the same.

Click HERE to go to the Fenwal Thermoswitch page on Flow Factor.

Brass Switches
17000-0
17021-0
17100-0
17121-0
17200-0
17221-0
17300-0
17321-0
17800-0
17821-0
18000-0
18021-0

Stainless Switches
17002-0
17023-0
17102-0
17123-0
17202-0
17223-0
17302-0
17323-0
17802-0
17823-0
18002-0
18023-0

Flow Factor has a small supply of the brass switches but when they are gone we cannot get any more.

Contact Flow Factor

216-765-4231

Tel-Tru Temperature Probes

Flow Factor Tel-Tru Stock of Temperature Probes


Contact Flow Factor HERE

BACK CONNECT LARGE INDUSTRIAL THERMOMETERS

3", 4", and 5" Back Connect Large Industrial Bimetal Thermometers: A rugged 90° back angle, rear threaded connection design. Commonly used in industrial, pulp and paper, food and beverage processing, HVAC, and OEM applications.

Model GT300R / 34100275

• 2-1/2" stem 
• 0/50 degrees C 
• 304SS wetted parts 
• 1/2"NPT connection 
• .250" stem diameter 
• Glass 
• Back Connect

Model GT300R / 34100276

• 2-1/2" stem 
• 0/100 degrees C 
• 304SS wetted parts 
• 1/2"NPT connection 
• .250" stem diameter 
• Glass 
• Back Connect

BACK CONNECT SMALL INDUSTRIAL THERMOMETERS

1-3/4" and 2" Back Connected Small Industrial Bimetal Thermometers: A smaller size, heavy duty, rear connected unit commonly used in OEM equipment and light industrial applications

Model
LN250R / 32100253

• 2-1/2" stem 
• -40/160 degrees F 
• 304SS wetted parts 
• 1/4"NPT connection 
• .250" stem diameter 
• Glass 
• Back Connect 
• 1% accuracy

Model LN250 / 31100956

• 9" stem 
• 0/220 degrees F 
• 304SS wetted parts 
• 1/4"NPT connection 
• .250" stem diameter 
• Glass 
• Back Connect 
• 1% accuracy

TESTING AND SPOT CHECKING BIMETAL THERMOMETERS

1" and 1-3/8" Testing and Spot Checking Bimetal Thermometers: Pocket sized thermometers used by inspectors, service and maintenance personnel, and technicians for general checking in food service, refrigeration, air conditioning, hot asphalt and food processing applications. These models are often modified for OEMs to use in limited space situations.

Model PT50 / 11110000

• 2.5" stem 
• 100/600 degrees F 
• 304SS wetted parts 
• 1/4"-28 connection 
• .150" stem diameter 
• Glass 
• Back Connect 
• 1% accuracy

TEL-TRU THERMOWELLS

Tel-Tru can supply thermowells for sanitary applications as well as thermowells which can be treated and documented to NACE standards. Thermowells are recommended for pressure, corrosive fluid, or high velocity applications.

Model 260-TW004-4.5
THERMOWELL

• 2.5" Insertion, 4" long
• 100/600 degrees F 
• 304SS wetted parts 
• 1/2" connection 
• 1/4" stem diameter 
• 316 Stainless Steel

These Units are in stock at present.

Flow Factor

216-765-4231

Elster American Meter 1813C Regulators

Flow Factor Stocks Elster American Meter Gas Regulators Series 1813C

For all general purpose gas regulator applications, the Elster 1813C Regulators are the best in the business.


The Elster American Meter Regulator Series 1813C 3/4 inch NPT is is the standard for Natural Gas or Propane (LP) regulation. The unit comes with a 3/16 inch orifice, and a 6-15 inch WC spring set at 7 inch WC. The 1813C series regulator has full internal relief with a 1 inch NPT vent, and full lock up.

The Elster AMCO part number is 1813C34316615.

The Elster American Meter Regulator Series 1813C 1 inch NPT is is the standard for Natural Gas or Propane (LP) regulation. The unit comes with a 1/8x3/16 inch orifice, and a 6-15 inch WC spring set at 7 inch WC. The 1813C series regulator has full internal relief with a 1 inch NPT vent, and full lock up.
The Elster AMCO part number is 1813C118316615.

The Elster American Meter Regulator Series 1813C 1 inch NPT is is the standard for Natural Gas or Propane (LP) regulation. The unit comes with a 3/16 inch orifice, and a 6-15 inch WC spring set at 7 inch WC. The 1813C series regulator has full internal relief with a 1 inch NPT vent, and full lock up.

The Elster AMCO part number is 1813C1316615.

The Elster American Meter Regulator Series 1813C 1 inch NPT is is the standard for Natural Gas or Propane (LP) regulation. The unit comes with a 3/8 inch orifice, and a 6-15 inch WC spring set at 7 inch WC. The 1813C series regulator has full internal relief with a 1 inch NPT vent, and full lock up.

The Elster AMCO part number is 1813C138615.

The Elster American Meter Regulator Series 1813C 1 inch NPT is is the standard for Natural Gas or Propane (LP) regulation. The unit comes with a 9/16 inch orifice, and a 6-15 inch WC spring set at 7 inch WC. The 1813C series regulator has full internal relief with a 1 inch NPT vent, and full lock up.

The Elster AMCO part number is 1813C1916615.

The Elster American Meter Regulator Series 1813C 1 inch NPT is is the standard for Natural Gas or Propane (LP) regulation. The unit comes with a 9/16 inch orifice, and a 6-15 inch WC spring set at 7 inch WC. The 1813C series regulator has full internal relief with a 1 inch NPT vent, and full lock up.

The Elster AMCO part number is 1813C1916615.

The Elster American Meter Regulator Series 1813C 1-1/4 inch NPT is is the standard for Natural Gas or Propane (LP) regulation. The unit comes with a 9/16 inch orifice, and a 6-15 inch WC spring set at 7 inch WC. The 1813C series regulator has full internal relief with a 1 inch NPT vent, and full lock up.

The Elster AMCO part number is 1813C114916615.

Click on the part number above to buy.

Contact us HERE.

Flow Factor
216-765-4231