American Meter Gas Products ~ Rotary Meters

Rotary Meters by Elster American Meter at Flow Factor.

Elster American Meters offers rotary meters as the RPM Series. These new rotary meters provide accurate flow measurement and outstanding performance in the most adverse conditions.

All RPM Series meters mount in either a horizontal or vertical position, depending on available space and convenience. Once installed, all standard and optional accessories can be easily positioned for convenient reading and quick service. All models have extremely good rangeability and are available in various pipe sizes to meet a variety of applications.

RPM-CMTC

Meter with Continuous Mechanical Temperature Compensator

RPM-STD

STANDARD meter with uncorrected mechanical register.

RPM-ID

Meter with uncorrected mechanical register and instrument drive platform.

RPM-CMTC-ID

Meter with Continuous Mechanical Temperature Compensator and instrument drive for mounting a pressure-compensating index or pressure corrector.

RPM-CMTC with Direct-Mount ERT

Meter with Continuous Mechanical Temperature Compensation. No more instrument drive accessory and sandwich pulsers are needed. The ERT can be programmed at our factory, in your meter shop or in the field.  

Rotary Meters normally stocked at Flow Factor

5.5M-CTR-2"-TWELL      AMCO 5.5M RPM rotary METER W/TWELL  80 MESH SCREEN, BOLT/GSKT SET

5.5M-CTR-3"-TWELL      AMCO 3" 5.5M RPM rotary METER W/MERCURY TCI, 80 MESH SCREEN, BOLT/GSKT SET

5.5M-MTCI-3"-TWELL   AMCO 3" 5.5M RPM rotary METER W/MERCURY TCI, 80 MESH SCREEN, BOLT/GSKT SET

3.5M-CTR-2"-TWELL      AMCO 3.5M RPM rotary METER WITH TWELL, 80 MESH SCREEN, BOLT/GSKT SET

3.5M-MTCI-2"-TWELL   AMCO 2" 3.5M RPM rotary METER W/MERCURY TCI, 80 MESH SCREEN, BOLT/GSKT SET

2M-CID-2"                            AMCO RPM rotary METER WITH instrument Drive

2M-MTCI-2"-TWELL       AMCO 2" 3.5M RPM rotary METER W/MERCURY TCI, 80 MESH SCREEN, BOLT/GSKT SET

866-360-9830
www.flowfactor.com

American Meter Gas Products ~ Diaphragm Meters

AC-250 Diaphragm Meter

The aluminum class Elster American Meter AC-250 is the industry's most cost-effective gas meter for residential applications. It is unequaled for accuracy retention and for life cycle maintenance economies.

AM-250 Diaphragm Meter

Elster American Meter Special application, residential gas meter available in either 5 PSIG or 10 PSIG Maximum Allowable Operating Pressure with a badge rate of 250 cfh (.60 gravity gas) at 1/2-inch W.C. differential

AT-210 Diaphragm Meter

The Elster American Meter AT-210 and AT-250 meters have a 5 PSIG Maximum Allowable Operating Pressure and can flow either 210 or 250 cubic feet per hour at 1/2” W.C. differential pressure.

AL-425 Diaphragm Meter

The Elster American Meter AL-425 diaphragm meter is ideally suited for larger residential or small commercial/industrial installations. Compatible with automatic meter reading technology.

AC-630 Diaphragm Meter

The AC-630, another of the diaphragm meters in the Elster American Meter product line, provides the customer with rugged durability and accurate long-term performance. Compatible with automatic meter reading technology.

BK-G4 Meter

The Elster American Meter BK-G4 is a synthetic diaphragm meter with the latest technology and injection-molded aluminum body.

AL-800 AL-1000

The Elster American Meter AL-800/AL-1000 diaphragm meters are for usage in commercial/industrial applications. These meters are compact and lightweight, but are designed for positive displacement accuracy for industrial/commercial loads.

AL-1400/AL-2300/AL-5000

The Elster Meter Services Refurbish program applies to AL-1400/AL-2300/AL-5000 series Elster American or Elster Canadian meters, suggested for fifteen (15) years old and newer.

www.flowfactor.com

Buy Elster American Meter Products Online

American Meter Gas Products

Elster American Meter Elster American Meter has been a leader in the measurement and control of natural gas since the very beginnings of the industry. Today, we continue to fulfill that role as part of Elster Gas North America. This global organization brings the latest technology and best practices from leading European and American manufactures of gas measurement and control equipment to markets around the world. At Elster American Meter, we have a history of design innovations that have consistently improved the accuracy and the service life of gas meters. We pioneered the shift to aluminum-case meters as a replacement for cast iron and introduced the molded convoluted diaphragm that established new standards for long-term accuracy and reliability. For over 160 years, Elster American Meter continues to pave the way for advancement in the gas industry. Whether it’s regulation, metering, data collection, data transfer or evaluation, Elster American Meter offers solutions for every application – customized to the specific needs of each individual customer – either as single components or complete systems. The metering and regulation product range covers devices for measuring consumption which can be used both for custody and non-custody transfer as well as traditional gas regulators for low, medium and high pressures. For the field of gas metering, Elster American Meter has also developed volume correctors and flow computers. These range from temperature volume correctors for commercial customers to flow computers for stations in the fields of gas distribution and transportation. Elster American Meter is the industry’s leading supplier of diaphragm meters. With models to meet your applications from domestic service to large industrial uses, Elster American Meter diaphragm meters have an outstanding record for durability and reliability. buy at www.flowfactor.com

Penberthy Magnetic Level Gages

Penberthy's MULTIVIEW™ Magnetic Liquid Level Gages can be built to serve practically any process industry situation. From the simplest operation to the most severe, corrosive environment, Penberthy can construct a system to best suit your company’s requirements. As pioneers in magnetic gage level indication and as creators of the unique concentric magnet design, Penberthy has the expertise to know what design, specifications and options best fit any given application. Contact a Penberthy representative to discuss specific duty requirements in your operation.

MULTIVIEW™ Magnetic Liquid Level Gages utilize a communicating chamber constructed of 2-1/2" pipe which is connected to the process tank with either side or end connections. A float with a self-enclosed magnet is custom sized and weighted to float at the surface of the process liquid to be monitored. The float is then installed in the communicating chamber.

The industry-unique concentric magnet in MULTIVIEW™ gages provides a more consistent magnetic field than conventional magnet designs.

Construction Materials AvailablePenberthy offers a wide range of materials, including:

304/304L STS
316/316L STS
Alloy-20
Monel
Titanium
Hastelloy-C
PVC
CPVC
PVDF
Tefzel® Lined
Halar® Lined

Typical Process Applications
Sodium Hypochlorite
Boiler Feedwater Tank
Hydrochloric Acid
Stop Oil
LPG
Interface
Dowtherm®
Sulfuric Acid
Hydrogen Sulfide
Oil/Water Separator
Sodium Hydroxide
Liquid Nitrogen
Flare Drums
Phosgene
Jet Fuel
Molten Sulfur
Sour Oil
Diesel Fuel
Deionized Water
Sumps
Freon
Liquid Ethylene
Water
Underground Storage
Benzene
Asphalt Settler
Acetic Acid
Liquids & Slurries

Follower Style Indicator

In MG Follower-Type models, the unit consists of a hermetically-sealed tube in a protective view housing. Within this tube is a gold anodized aluminum follower which will mirror level changes in the process tank. This entire assembly is attached to the communicating chamber where the follower is magnetically coupled with the float. Because the follower and float are magnetically linked, liquid level changes in the process tank will cause both float and follower to rise and fall in unison. The result is a precise indication of the liquid level within the vessel.

Flag Style Indicator

MG Flag-Type monitors provide a more secure link between the indicator and float. The view housing is sealed and consists of a single column assembly of aluminum flags within an extruded aluminum channel. These flags are anodized with black on one side and gold on the other. Each flag houses a small magnet and is assembled on a single, individual axle. As the float in the communicating chamber rises and falls, the magnetic interaction between float and flag magnets cause the flags to rotate 180°. These changes are shown through contrasting colors – black above and gold below the liquid level.

To insure trouble-free operation, Penberthy's flags are magnetically interlocked and utilize mechanical stops. This prevents over-rotation. Penberthy's redundant axle system prevents binding, with each flag allowed to rotate on the axle and each axle free to rotate in the channel. This method of indication is always accurate, regardless of the speed of process level change or vibration.

Switches can be added to the level gage for point level control.

MGS Switches provide non-intrusive point-level control and contain no mercury. They allow you to be environmentally safe without sacrificing accuracy.

MGS-314: SPDT 5A service

MGS-314D: DPDT 10A service

MGS-314L: SPDT 1A service used with standard MULTIVIEW?

MGS-314M: SPDT 1A service used with either TMMG (Top Mount Magnetic Gage) or MMG (Mini Magnetic Gage)

Transmitters can be added for continuous level control.

MGT Transmitters provide continuous level indication to remote locations via 4 to 20 mA loop-powered operation.

MGT-362: A reed switch based unit available in integral and remote mounting styles

MGT-362B or C: An in-tank reed switch based unit. The MGT-362B is an NPT-mounted assembly. The MGT-362C is a flange-mounted assembly. Both are available in integral or remote mounting styles.

MGT-367: A magnetostrictive transmitter available with or without Hart protocol.

Please visit our web site and fill our our Penberthy form for more information.

Flow Factor and Industrial Flow Products

Flow Factor sells products to control media in flow situations, tanks and pipes.

These products include solenoid valves, pressure switches, temperature switches, level control and switches, gauge, jet pumps and flow switches and monitoring.

Some of the products sold are ASCO, Parker, Ametek, Erdco, Penberthy, Process Technology, US Gauge, King and Robertshaw.

Rating the valve capacity in terms which apply to all operating conditions is accomplished by determining the "Flow Factor" (Cv) of the valve.
The Cv value is the number of U.S. gallons of water at 16°C (60°F) per minute that, when flowing through the valve, causes a pressure drop of 1 PSI.
There are five main parameters to consider when selecting a valve: Cv, media compatibility, pressure, temperature, and process fitting.

The flow factor or Cv can be very important in valve selection. The Cv can be used to compare valves to insure similar flow capacities.

Our Jet pumps or Eductors can be used to mix, heat, and pump medias without electrical power.
Site flows are used to give a visual indication of process flow.
Gauges are used to measure and give visual indication of temperatures, flows, and pressures.
Level control is used to monitor and measure levels in tanks and vessals.


Ametek-U.S. Gauge - U.S. Gauge is one of the world's leading suppliers of high quality, competitively priced pressure and temperature measurement products. Founded in 1904, USG's product offering includes bourdon tube and diaphragm capsule pressure gauges ranging in size from 1-1/2 inches to 6 inches; with brass, stainless steel, alloy steel or Monel internals.

ERDCO - ERDCO® offers a complete line of flowmeters, sight flow indicators, flow transmitters and flow indicating switches. We employ elegantly simple measuring technologies with proven reliability in utility fluid applications.

King Instruments - King Flowmeters provide exceptional performance in a wide range of industrial, commercial and specialty applications. King offers more styles, sizes, features and options to satisfy all your rotameter requirements.

ASCO General Controls - Solenoid Gas Valves, including Pilot Gas Shutoff Valves and Main Gas Shutoff Valves; Solenoid Oil Shutoff Valves; Hydramotor Oil Valves and Hydramotor Gas Valves.

Penberthy/Tyco Flow control - EDUCTORS / EJECTORS / JET PUMPS, LIQUID LEVEL GAGES & GAGECOCKS, MAGNETIC LIQUID LEVEL GAGES, SIGHT FLOW INDICATORS & SIGHT WINDOWS, ULTRASONIC LEVEL INSTRUMENTATION, BOILER TRIM / CONDUCTIVITY PROBES AND HIGH PRESSURE GLASS GAGES

Barksdale - Barksdale offers both mechanical and electronic pressure, temperature and level instrumentation solutions for all industrial applications.

Process Technology - Manufactured in an ISO 5 (class 100) cleanroom, these products include: UPDI water heaters, inline fluoropolymer and quartz chemical heaters, a large selection of fluoropolymer chemical bath systems, solvent heaters and nitrogen heaters. Semi S2/S3 and CE compliant; ETL/UL certified.

Robertshaw - Robertshaw offers RF capacitance level control technology for virtually any substance in any type of vessel. Solid state, digital designs offer on/off and continuous level measurement in all types of vessels. Using the power generated from the process, Robertshaw self-actuated regulators are simple, complete control units built to the highest quality specifications to assure satisfactory service for many years.

Please visit us at www.flowfactor.com