co-ax® valves for polyol applications

co-ax® valves from Flow Factor

Get a quote for co-ax HERE!

co-ax® valves for polyol applications

co-ax® valves being used in this application

• PCS-1 10, PCS-1 15, PCS-2 10, PCS-2 15, PCS-3 15, PCB-1 10, PCD-1 10 - cartridge valves, externally controlled KB 15 direct acting valves
• VMK-H 15, VMK-H 15 DR, VMK-H 20, VMK-H 25, VSV-M 50

co-ax® valves are used to inject polyol, which then blends together with isocyanates to create a chemical compound called polyurethanes.

The mixture of the chemicals form molds for many different applications, which are used to create mattresses, foam insulation for refrigerators and freezers, home and automotive seats, elastomeric shoe soles, fibers (e.g. Spandex), and adhesives.

Isocyanates, when exposed to air, tend to form crystals that generate premature wear in valves, especially those containing abrasive fillers and they are equally destructive to the seals and seat.

Multiple co-ax® valves have been designed and sold for polyol applications. The fast actuation speeds of the co-ax® valve combined with high cycle life and virtually no maintenance are key advantages for this application.

Why are co-ax® valves the preferred choice?

• Fast actuation
• Engineered for long life (high cycle life)
• Pressure balanced design

Get a quote for co-ax HERE!

Flow Factor
216-765-4231
www.flowfactor.com

CO-AX VALVES INC. IS PART OF THE MÜLLER CO-AX GROUP

Solenoid Valve Trouble Shooting Guide

Marvin the Maintenance Man wants to help you troubled shoot Solenoid Valves.

BUY valves HERE!  Contact Flow Factor HERE!


Whoops: "Throw the extra parts away."  All parts must be assembled correctly for the valve to operate properly.

Whoops: "I only hit the valve ONCE with my hammer." A hammer is not a trouble shooting tool. Valve abuse contributes to the most reported problems.

Whoops:  "We don't need a special wrench; I'll find something to take the valve apart". Special tools for the valve disassembly may be needed.  Pipe wrenches etc. will damage parts.

Whoops: "I'll add more teflon tape."  Gobs of tape will block internal passages and interfere with seating. (These are not ball valves).

Whoops:  I forgot to turn on the electricity." "I forgot to open the hand valve." "A strainer takes up too much room." Beware of Marvin Maintenance.

Whoops:  "It's only 10 PSI more than maximum operating pressure."  "It's almost at the minimum operating pressure." " Voltage is not that important." Name Plate Data Applies.

Whoops: "I throw them away." Installation and maintenance instruction sheets have trouble shooting hints, maintenance notes and assembly instructions; etc." Do Not Throw Them Away.

Whoops: "So I piped it up backwards and/or upside down." Proper Mounting is IMPORTANT.

Whoops: "We're out of 1 inch pipe, so I used 1/4 inch pipe." Valves, especially 3-way and 4-way valves,  should not be restricted.

Whoops: "Well it operated pretty well for the past 20 years."  A maintenance program is suggested.

Whoops: "The Valve is defective."  "The Valve does not operate." "The Valve Failed."  Not very descriptive. Find out part number and get application data.

Whoops:  "I need the silver thing." = Solenoid Sub Base Assembly.
                "I need an orifice." = Not a spare part. Buy a new valve.
                "I need  gasket." =  Specify which one.
                "I need  plunger." = Core Assembly.
                "I need a solenoid." = Coil

Whoops:  "What is a Kit?" Do not replace individual parts.  Use a kit to replace all the wearable parts and restore the valve.  Call for kit # or look on name plate.

Whoops: "Buy any two way valve, they're are all the same." Misapplication problems can be avoided.

Whoops: "I can trouble shoot anything!"  We believe you Marvin.

BUY valves HERE!

TROUBLE SHOOTING 2 WAY VALVES

Trouble shooting 2-way DIRECT ACTING Solenoid Valves
Normally Closed Valve Fails to OPEN when energized:
1. No Voltage
2. Low Voltage
3. Burned Out Coil
4. Excessive Pressure
5. Binding Core
6. Swollen or cut resilient disc
7. No Pressure to valve

Trouble shooting 2-way DIRECT ACTING Solenoid Valves
Normally Closed Valve Fails to CLOSE when energized:
1. Faulty control circuit
2. Improper Installation
3. Scale of foreign matter
4. Damaged Seat or Disc
5. Binding Core
6. Damaged or Missing Spring

Trouble shooting 2-way DIRECT ACTING Solenoid Valves
Excessive Solenoid NOISE when energized:
1. Low Voltage
2. Loose Solenoid Parts
3. Foreign Matter on core or Plug Nut
4. Worn Core or plug nut
5. Incorrect or damaged spring


Trouble shooting 2-way PILOT OPERATED Solenoid Valves
Normally Closed Valve Fails to Open when energized:
1. No Voltage
2. Low Voltage
3. Burned Out Coil
4. Excessive Pressure
5. Binding Core
6. Swollen or cut resilient disc
7. No Pressure to valve
8. Low Pressure
9. Ruptured diaphragm or damaged piston ring
10. Plugged or restricted pilot orifices

Installation Tips for 3 and 4 way Pilot Operated Valves

1. Do Not Select Oversized Valves. Size Carefully for Flow and Cylinder speed. For Economy and reliable operation.

2. Use Full Area Lines in Pressure and Exhaust.

3. I.D. (Internal Diameter) of lines and fittings must be larger than orifice.

4. Differential Between Pressure and Exhaust must exceed the minimum at all times.

5. Do Not Meter Flow in Pressure or Exhaust Lines.

6. Install Speed Control Valves in the Cylinder Lines Only.

7. Avoid Pressure Regulators if Possible. If essential, the regulator must have flow capacity to maintain the MINIMUM Differential at all times.

8. Hydraulic Pumps or Air Reservoirs must have adequate capacity to maintain the minimum DeltaP at all times.

9. Pressure Differential may be measured by means of gages installed immediately at the pressure and exhaust connections.

10. Do Not Mistake a Faulty Cylinder for a valve malfunction, Isolate the Cylinder.

BUY valves HERE!

Get a solenoid Valve Quotation HERE!

Flow Factor
216-765-4231
www.flowfactor.com

ASCO Solenoid Valves - Parker Solenoid Valves - Jefferson Valves

Parker Gold Ring Over Stock Solenoid Valves

Over Stock and Close-Out Parker Solenoid Valves and Coils at Flow Factor



Parker Gold Ring 08F22C2140ACFWC4208 120/60
Submersible Coil
1/2 Inch Normally Closed Valve, 5-100 PSI with Brass Body

08F22C2140ACFWC4208

Parker Gold Ring  08F34C2140AAF 3way Valve Body
10-150 PSI, Brass Body, Needs AF style AC Coil

08F34C2140AAF

Parker Gold Ring BFGC01 Solenoid Coil 24/60, Nema 1

BFGC01

Parker Gold Ring BFGC05 Solenoid Coil 120/60, Nema 1

BFGC05

Parker Gold Ring BFGC15 Solenoid Coil 240/60, Nema 1

BFGC15

Parker Gold Ring CHGC01 Solenoid Coil 24/60, Nema 1
Type H insulation for coil temps to 353F - can be used in lieu of a CF coil

CHGC01

Parker Gold Ring CFGC01 Solenoid Coil 24/60, Nema 1

CFGC01

Parker Gold Ring CFGC15 Solenoid Coil 240/60, Nema 1

CFGC15

Parker Gold Ring 04F20O3108ADFPH05 120/60 Valve
1/4 inch ports, Normally Open Stainless Valve
205 PSI air, 190 PSI water, 180 PSI oil

04F20O3108ADFPH05

04F20O3108ADFPH05

Parker Gold Ring 04F30O2108ACF  3-way Valve Body
Normally Open, 70 PSI max and mounting holes on back of valve

04F30O2108ACF

Parker Gold Ring 06F22C2140ADF  2-way Valve Body
3/8 Inch ports, Normally Closed, 5-300 PSI - Requires Type DF AC solenoid

06F22C2140ADF

Parker Gold Ring 04F20C1108AAFPH05  120/60 Valve
1/4 inch ports, Normally Closed Brass Valve, DIN style Coil
140 PSI Air, 165 PSI Water, 90 PSI Light Oil

04F20C1108AAFPH05

Parker Gold Ring 02F20C1103AAF  2-way Valve Body
1/4 inch ports, Normally Closed, 0-750 PSI - Requires type AF AC solenoid

02F20C1103AAF

Parker Gold Ring 04F20C1106A1FOK90  120 VDC Valve
1/4 inch ports, Normally Closed Brass Valve, Screw Terminals style Coil
150 PSI Air, 125 PSI Water, 125 PSI Light Oil
Could exchange another TYPE A1F DC coil in 12 or 24 vdc voltage

04F20C1106A1FOK90

Parker Gold Ring 02F20C1106A1FOS75  12 VDC Valve
1/8 inch ports, Normally Closed Brass Valve, Spade Terminals style Coil
150 PSI Air, 145 PSI Water, 145 PSI Light Oil
Could exchange another TYPE A1F DC coil in 24 vdc voltage

02F20C1106A1FOS75

Contact Flow Factor

Parker Angle Body Valves

Flow Factor Sells Parker New Angle Body Valves

Parker Angle Body Valves 
The Parker Angle Body Valve series PA is an pneumatically-actuated valve driven by a piston and is capable of handling slurry solutions with particles or corrosive solutions at high temperatures up to 356 F and PSI ratings up to 232.

The Parker PA series Angle-Body valves are good for hazardous rated 

areas and fill needs in industries like food and beverage, water 

technology, pharmaceutical, chemical and sterilizers. Benefits include 

visual position indicator, anti-water hammer, stainless steel valve bodies 

and actuators, any position mountable and tight shut off.

TO VIEW SPECIFICATIONS AND TO BUY,CLICK ON A VALVE BELOW.


Parker PA10S1N3S050A, 3/8 inch 2-way Valve, 0-232 psi, NC, 304SS

Parker PA10C1N3R032S, 3/8 inch 2-way Valve, 0-232 psi, NC, 316L SS, Compact

Parker PA15S1N4S050A, 1/2 inch 2-way Valve, 0-232 psi, NC, 304SS

Parker PA15S1N4R050S, 1/2 inch 2-way Valve, 0-232 psi, NC, 316L SS

Parker PA20S1N5S050A, 3/4 inch 2-way Valve, 0-232 psi, NC, 304SS

Parker PA20S1N5R050S, 3/4 inch 2-way Valve, 0-232 psi, NC, 316L SS

Parker PA25S1N6S063A, 1 inch 2-way Valve, 0-232 psi, NC, 304SS

Parker PA25S1N6R063S, 1 inch 2-way Valve, 0-232 psi, NC, 316L SS

Parker PA32S1N7S063A, 1-1/4 inch 2-way Valve, 0-232 psi, NC, 304SS

Parker PA32S1N7R063S, 1-1/4 inch 2-way Valve, 0-232 psi, NC, 316L SS

Parker PA40S1N8S063A, 1-1/2 inch 2-way Valve, 0-232 psi, NC, 304SS

Parker PA40S1N8R063S, 1-1/2 inch 2-way Valve, 0-232 psi, NC, 316L SS

Parker PA50S1N9S080A, 2 inch 2-way Valve, 0-232 psi, NC, 304SS

Parker PA50S1N9R080S, 2 inch 2-way Valve, 0-232 psi, NC, 316L SS

Parker PA65S1NTR100S, 2-1/2 inch 2-way Valve, 0-232 psi, NC, 316L SS


NORMALLY OPEN VALVES AVAILABLE TOO.

For a quote just fill in our Solenoid Valve Parts Form.


www.flowfactor.com

866-360-9830

Parker Angle Body Valves from Flow Factor

Flow Factor sells Parker Air Operated Angle Body Valves


The Parker PA Series Valves Features

Compact design, high flow rates 

• Visual position indicator standard 

• For temperatures from 14°F to 356°F / -10°C to 180°C 

• Working pressures up to 16 Bar, 232 psi 

• Dampened closing anti-water hammer design (fluid under seat) 

• Metal actuator housing for exceptional durability in steam & mildly aggressive applications 

• Valves satisfy the Pressure Equipment Directive 97/23/EC 

• Mountable in any position 

• Tight shut-off and Long Service Life 

• Valve seats and body gaskets fully repairable 

Technical Specifications 

Body Material: 304 SS or 316 SS 

Function: 2/2 NC, NO, NC(antiwater hammer), double acting (with spring) 

Nominal sizes: DN10-DN65, 3/8” to 2 ½” 

Connections: Threads- BSP,BSPT,NPT,NPTF 

Welded- ISO1127/4200, DIN 11850.1, DIN 11850.2, DIN 11850.3, 

SMS3008, ASME BPE  Flanges 

Max Working Pressure: 16 BAR, 232 PSI 

Differential Pressure: See Specification Charts 

Pilot Pressure 3 Bar to 10 Bar. 43.5 PSI to 145 PSI 

Actuator Material: 304 SS, or Aluminum 

Maximum Fluid Temp: -10°C to 180°C, 14°F to 356°F 

Optional 

Ambient Temperature: -10°C to 60°C, 14°F to 140°F 

Seat Seal material: PTFE/RTFE 

Packing Gland: PTFE. PTFE and Carbon 

Viscosity: Maximum 600mm2/s( 600cSt, 80° E, 2700 SSU 

Vacuum: maximum 0.0295 mercury (Hg) 

Leakage: ANSI Class VI shutoff 

Installation: Any Position 

Optical Position Indicator: Standard on all sizes 

Pilot Control Media: Air, Neutral Gas, Water 

Fluids handled: Inert gases, hot water, oils, steam, aggressive and corrosive fluids 

Pilot Port Size: 1/8” for 32,40,50, & 63 mm actuators, ¼” for 80, 100 mm actuators 

Applications for Parker Angle Body valves:

Food and Beverage Processing

Water Technology and Treatment

Textile Industry

Cooling systems on injection Molding Machines

Pharmaceutical and Cosmetic Industry

Chemical Process Technology

Refrigeration and Cooling Exchangers

Sterilizers Steam Supply

Mining, Cement, Concrete, Paper

General Industries of Aggressive Fluid

industrial Laundry Equipment

Air Dryers

Click HERE to use our parts form

for a quote

www.flowfactor.com

866-360-9830