Showing posts with label littlefuse. Show all posts
Showing posts with label littlefuse. Show all posts

Sunday, November 29, 2020

Littelfuse LLC6 Series - Low Level Cutoff

 Low Level Cutoff Liquid Level Control

LIttelfuse LLC6 Series from Flow Factor


The Littelfuse LLC6 Series is a plug-in, single-probe conductive liquid level control designed for low liquid level cutoff protection. It offers a factory fixed time delay of 1 - 60s and is available in input voltages of 24, 120, or 230VAC. LED indicator illuminates whenever the Littelfuse LLC6’s 10A, SPDT output relay is energized. Available with automatic/manual reset or a special manual reset with power outage feature, which auto resets the unit when power is restored and the water level is acceptable. 24VAC and 120VAC units are recognized as limit switches under UL353 (230VAC units are UL508) and CSA certified under Standard 14.

Littelfuse LLC6 Liquid Level Cutoff Relay










Operation: 

Automatic Reset (Reset terminals not connected): When liquid rises to the low level cutoff probe, the output relay and the LED indicator energize. When the liquid falls below low level cutoff probe, the output relay and the LED indicator de-energize after a fixed time delay.

Manual Reset (Reset switch connected)

When the liquid level falls below the low level probe, the output relay and LED de-energize after a fixed time delay. When the liquid level rises to the low level probe, the output relay and LED indicator remain de-energized until the manual reset switch is opened; then they energize immediately

Power Outage Manual Reset (Reset switch connected):

A power outage causes the output relay and LED indicator to de-energize. Upon restoration of power, if the liquid level is above the low level probe, the output relay and LED indicator will re-energize. If the liquid level is below the low level probe, the output relay and LED indicator remain de-energized until the Normally Closed (NC) reset switch is opened.

Features & Benefits:

Isolated 12VAC on Probe >> Prevents Electrolysis

Industry Standard 11 Pin Connection >> No Special Connections

LED indication >> Visual Indication we energized

Power Outage Protection >> Automatically resets after power outage

Littelfuse Part Numbers:

LLC6210F10M: 

24Vac, 10 seconds Delay, 10K Ohms, Automatic/Manual Reset

LLC6410F10M: 

120Vac, 10 seconds Delay, 10K Ohms, Automatic/Manual Reset

LLC643F10M: 

120Vac, 3 seconds Delay, 26K Ohms, Automatic/Manual Reset

LLC6610F10M: 

230Vac, 10 seconds Delay, 5K Ohms, Power Outage Manual Reset

Littelfuse LLC6 Accessories:

BZ1 Panel Mount Kit
NDS-11 11 pin Socket
PSC11 Hold Down Clips
PHST-38QTN Electrode
LLP-24 Threaded Probe (24 inches)

Contact Flow Factor HERE!

Flow Factor
216-765-4231
www.flowfactor.com

Littelfuse LLC6...Littelfuse LLC6...Littelfuse LLC6...Littelfuse LLC6...Littelfuse LLC6

Wednesday, September 30, 2020

Pump Control from Littelfuse - PC-XXX-LLC Series

 Pump Control from Littelfuse in Small Package - Octal Socket

The Littelfuse PC-xxx-LLC-CZ and PC-xxx-LLC-GM series are liquid level control relays used to control conductive liquid pumping operations in a pump-up or pump-down application. The units come in two different voltage ranges (see specs below). The units have an adjustable sensitivity knob (4.7 k to 100 k ohms) that is set according to the resistance level at which you want the probes (sold separately) to sense the conductive liquid. The units have a built-in debounce time delay that prevents the relay from energizing if the probe resistance momentarily goes above or below the sensitivity set point (due to liquid splashing in the tank). The Little Fuse units operate their internal relay based on inputs from a high and low probe and a common reference (when a conductive tank is used) or common probe (when a non-conductive tank is used). 

Click HERE for a quote

Littelfuse Pump Protection Relay










Littelfuse - PC-XXX-LLC-CZ 

Compatible with Crouzet PNR & PNRU Series Liquid Level

Littelfuse - PC-XXX-LLC-GM

Compatible with Gems 16M Series Liquid Level

Specifications:

Supply Voltage:

PC-100-LLC_CZ ... 95-120VAC

PC-100-LLC_GM ... 95-120VAC

PC-200-LLC_CZ ... 190-240VAC

PC-200-LLC_GM ... 190-240VAC

Frequency 50/60 Hz

Probe Sense Voltage is 5VDC pulsed

Debounce Time Delay is 2 seconds

Probe sensitivity is 4.7k to 100k Adjustable

Output contact rating is 10A @ 240VAC

Approvals are UL and CE

Mounting is via Octal Socket; DIN rail or surface

Octal socket part number is OT08PC




Click HERE for a quote

Flow Factor

216-765-4231

www.flowfactor.com

Littelfuse PC-100-LLC_GM...Littelfuse PC-100-LLC_CZ... Littelfuse

Littelfuse PC-200-LLC_GM...Littelfuse PC-200-LLC-CZ... Littelfuse

Thursday, July 30, 2020

Littelfuse Pump Seal Leak Detector

Leak Detector for Pumps from Flow Factor and Littelfuse

The Littelfuse 460-15-100-SLD Seal Leak Detector Protects pumps from damage.

For a quote please use our contact us form HERE!

Littelfuse Pump Saver Seal Leak Detector





















The Littelfuse 460-15-100-SLD is a seal-leak detector to sense seal failures on submersible pumps.

A microcontroller-based relay monitors the shaft seal of a submersible pump motor.  A resistive probe is installed in the sea cavity.  If water leaks into the pump, the resistance measured by the probe decreases. When the resistance drops below the sensitivity set point, the unit will trip and the relay contacts will change state. Output relay logic can be reversed by removing an external jumper.  the unit will automatically reset when the fault is cleared.

Control voltage is 120 VAC
2 form A - SPST contacts
8 amps
IP20  / NEMA 1
LED indicators
UL 508
CE IEC 60947
ONE POUND WEIGHT
Din rail or surface mount.

For a quote please use our contact us form HERE!

Flow Factor
216-765-4231
www.flowfactor.com

Littelfuse...Littelfuse...Littelfuse...Littelfuse...Littelfuse...