Flow Factor Sells Barksdale Valves
For a Quote, Please contact us HERE!
Series III-L Valves - Series 9000, 9020 - Series II
Series 9040, 9080 - Series 518, 526 - Series 4140
Model 371MT7 - Series 3760 - Series 140, 200, 920, 5620
Series 6900, 6940 - Series 6140, 6180
With the ability to handle high pressure demands between 3000 to 5000 psi while maintaining a high flow capability of 75 GPM, the Series III-L is well suited to tolerate contaminated media. The combination of the high flow and high pressure and virtually zero-leakage* makes the Series III-L valve the choice for the toughest applications where zero-leakage* is a must.
- Original Shear-Seal® technology
- 2 & 3 position valve
- 2 position actuated valve
- Manual override
- Air or hydraulic integrated actuator
- Superior shifting performance
- High flow with low pressure drop
- Rugged integrated solution
- Extended shaft for alternate position sensor
- Robust detent stop
- Panel mounting option
- Position indication option
- Suitable for hydraulic & water glycol media
Applications
- Land-based oil drilling controls
- BOP accumulator units
- Test systems
- Workover rigs
- Mobile drilling rigs
- Hydraulic based industrial applications
 |
| Barksdale Series III Heavy Duty Valves |
- Original Shear-Seal® technology
- Interflow/non interflow
- Easy panel mounting
- Tolerates contaminates
- Spring return option
Applications
- Pilot valve for pneumatic valve actuators
- Gas manifold controls
- Manual control of 2-position cylinder
- Original Shear-Seal® technology
- Air or hydraulic integrated actuator
- 2- and 3-position
- Superior shifting performance
- High velocity flow
- Compact design
- Corrosion resistant materials
Applications
- Land-based & offshore oil drilling controls BOP control units
- Steel mills
- Shipboard hydraulic control systems
- Refineries and chemical processing plants
 |
| Barksdale Series II Actuated Heavy Duty Valves |
- Original Shear-Seal® technology
- Low pressure drop
- Tolerates contaminates
- Spring return option
- Flexible design
Applications
- Paper mill controls
- Air pilot valves
- Halon fill systems
- Heating oil control
- Compressed gas manifold control
 |
| Barksdale 9040 & 9080 Low Pressure Valves |
- Original Shear-Seal® technology
- Compact design
- Non-interflow option
- Spring return option
- Multiple handle types
- 2 or 3 position detent
Applications
- Work holding clamps and systems
- Hydraulic presses and lifting systems
- Hydraulic test equipment
- Grease injection equipment
- Hydraulic power units
- Original Shear-Seal® technology
- All stainless steel construction
- SAE porting standard
- NPT porting available
- Pressures to 15,000 psi
- Low pressure drop
- Low handle load
- Original Shear-Seal® technology
- All stainless steel construction
- SAE porting standard
- NPT porting available
- Pressures to 15,000 psi
- Low pressure drop
- Low handle load
Applications
- Offshore drilling equipment
- Refineries and chemical processing plants
- Gas compression systems
- Marine umbilical reels
 |
| Barksdale Series 4140 High Pressure Valves |
Barksdale's position indicators are sensitive feedback devices that can be attached to Series II & Series III-L valves to provide valve status feedback. Using Barksdale's know-how in electric switch technologies, the position indicator senses any of the three valve positions and signals this information through an electrical contact. With a housing constructed of all stainless steel material, this product is designed for use in heavy industrial environments and in the most demanding applications. The explosion proof rating is Division I, Class I.
In applications where feedback from the valve is desirable, Barksdale's position indicator replaces such devices as proximity sensors, pressure switches and limit switches. Position indicators come already installed and calibrated on our Series II & Series III-L valves, saving installation costs for the customer.
Features:
- Fits all Series II & Series III-L valves
- 2 position and 3 position
- 30 VDC max, 500 mA (PLC compatible)
- Designed for Division I and I.S. use
- UL & ATEX / IECEx certified
- NEMA 4X, IP66
Applications
- Valve status output
- BOP closing unit ‘OPEN-CLOSE' signal
- Hydraulic power units
 |
| Barksdale 371MT7 Position Indicator |
- Original Shear-Seal® technology
- Convenient sub-plate manifold mounting
- Low pressure drop
- High velocity flow
- Spring Return Option
- Tolerates contaminates
- Low handle load at high pressures
Applications
- Steel mills
- Shipboard hydraulic control systems
- Refineries and chemical processing plants
- Power generation facilities
 |
| Barksdale Subplate Mounted Heavy Duty Valves - 3760 |
- Original Shear-Seal® technology
- High velocity flow
- Tolerates contaminates
- Low handle load at high pressures
- Spring return option
- Low pressure drop
- 2- and 3-Position Actuators
- For Lockout Device for Oil & Gas Heavy Duty Valves option
Applications
- Land-based and offshore drilling equipment
- Steel mills
- Nitrogen charging panels
- Refineries and chemical processing plants
- Power generation facilities
 |
| Barksdale Heavy Duty Valves 140, 200, 920, 5620 |
Barksdale's High Pressure OEM Valve line provides exceptional directional control for fluids up to 3000 psi in the toughest industrial applications. Using Barksdale's Shear-Seal® technology the OEM Valve products offer dependable performance and long life even when the media being controlled is contaminated with debris that would ruin ordinary valves.
Different flow patterns are built into this OEM line the "Closed Center-Manipulator", also known as "Float Center", where in the center position the pressure port is blocked and the cylinder ports are open to the return port. Other models features "Open Center-Manipulator" also known as "Open Center" features a flow pattern with the pressure port, cylinder ports open to the return port.
Features:
- Original Shear-Seal® technology
- Low pressure drop
- Tolerates contaminates
- Spring return option
- Special flow pattern for OEM designs
Applications
- Hydraulic presses
- Military equipment
- Paper mill controls
- Pipe forming
- Railroad maintenance equipment
 |
| Barksdale 6900 & 6940 High Pressure Valves |
- Original Shear-Seal® technology
- Low pressure drop
- Tolerates contaminates
- Spring return option
- Flexible design for OEM requirements
Applications
- Hydraulic presses
- Military equipment
- Paper mill controls
- Hydraulic pilot valves
- Railroad maintenance equipment
- Halon fill systems
Valve Lockout Device is used on oil and gas applications to mechanically stop the handle from rotating to ensure that the valve remains inoperable while technicians carry out maintenance work. The Valve Lockout Device is attached to the operational part of Barksdale's heavy duty valve to prevent the valve from changing position. Valve lockouts help prevent potentially harmful accidents during maintenance or repairs and allow workers to close off or isolate energy sources such as hydraulic pressure and fluids. This specific lockout device is designed for use on Barksdale's heavy duty valves 1/2" valves or 1" oil & gas valves to stop any rotation of the handle.
This lockout device meets the scope of OSHA 1910.147, subpart O.
Barksdale Part numbers:
KD2535-3 Fits 1/2 inch heavy duty valves
KD2535-5 Fits 1 inch heavy duty valves
Lockout Pin p/n 254139
Lockout Padlock p/n 25835
Features:
- Fits Heavy Duty Valves: 1/2” & 1
- Locks in all three positions
- Easily installed in the field
- Resistance to oils and fuels
- Optional corrosion-resistant locks
Applications
- BOP closing unit ‘OPEN-CLOSE’
- Safety lockout
- Maintenance shutdown
 |
| Barksdale Valve Lockout Device For Safety |
No comments:
Post a Comment