Process Flow and Control Products

ASCO two way Valves

2012-01-29T16:18:00.001-08:00

Flow Factor Offers ASCO solenoid valves for Industrial and commercial uses.

ASCO 2-Way Valve P/N 8262G2, 120 vac, 1/8 NPT, NC, Buna N Seals

ASCO 2-Way Valve P/N 8262G2, 24 VDC, 1/8 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8262G202, 120 vac, 1/4 NPT, NC, Buna N Seals

ASCO 2-Way Valve P/N 8262G202, 24 VDC, 1/4 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8262G208, 120 vac, 1/4 NPT, NC, Buna N Seals

ASCO 2-Way Valve P/N 8262G208, 24 VDC, 1/4 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8262G212, 120 vac, 1/4 NPT, NC, Buna N Seals

ASCO 2-Way Valve P/N 8262G212, 24 VDC, 1/4 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8262G220, 120 vac, 1/4 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8262G262, 120 vac, 1/4 NPT, Nomally Open, Buna N Seals

ASCO 2-Way Valve P/N 8262G262, 24 VDC, 1/4 NPT, Nomally Open, Buna N Seals

ASCO 2-Way Valve P/N 8262G263, 120 vac, 1/4 NPT, Nomally Open, Buna N Seals

ASCO 2-Way Valve P/N 8262G263, 24 VDC, 1/4 NPT, Nomally Open, Buna N Seals

ASCO 2-Way Valve P/N 8263G2, 120 vac, 3/8 NPT, NC, Buna N Seals

ASCO 2-Way Valve P/N 8263G2, 24 VDC, 3/8 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G1, 120 vac, 3/8 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G1, 24VDC, 3/8 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G2, 120 vac, 1/2 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G2, 24VDC, 1/2 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G3, 120 vac, 3/4 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G3, 24VDC, 3/4 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G4, 120 vac, 1 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G4, 24VDC, 1 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N SC8210G4, 24VDC, 1 NPT, NC. Buna N Seals, DIN Coil

ASCO 2-Way Valve P/N 8210G7, 120 vac, 1/2 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G8, 120 vac, 1 1/4 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G8, 24VDC, 1 1/4 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G9, 120 vac, 3/4 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G9, 24VDC, 3/4 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G22, 120 vac, 1 1/2 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G22, 24VDC, 1 1/2 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G34, 120 vac, 1/2 NPT, NO. Buna N Seals

ASCO 2-Way Valve P/N 8210G34, 240 vac, 1/2 NPT, NO. Buna N Seals

ASCO 2-Way Valve P/N 8210G34, 24 VDC, 1/2 NPT, NO. Buna N Seals

ASCO 2-Way Valve P/N EF8210G37, 120 vac, 1/2 NPT, NC. Buna N Seals, Stainless Steel Body

ASCO 2-Way Valve P/N 8210G54, 120 vac, 1 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G54, 24VDC, 1 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G93, 120 vac, 3/8 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G93, 24 VDC, 3/8 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G94, 120 vac, 1/2 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G94, 24VDC, 1/2 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G94MO, 120 vac, 1/2 NPT, NC. Buna N Seals, Manual Operator

ASCO 2-Way Valve P/N 8210G95, 120 vac, 3/4 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G95, 24VDC, NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G100, 120 vac, 2 NPT, NC. Buna N Seals

ASCO 2-Way Valve P/N 8210G100, 24VDC, 2 NPT, NC. Buna N Seals

ASCO 2-Way Steam Valve P/N 8267B3, 120 vac, 3/8 NPT, NC, 0-30 psi, PTFE Seals, EPR Disc.

ASCO 2-Way Steam Valve P/N 8220G21, 120 vac, 1/2 NPT, NC, Stainless Seat

ASCO 2-Way Steam Valve P/N 8220G23, 120 vac, 3/4 NPT, NC, Stainless Seat

VISIT FLOW FACTOR TO ORDER !

ASCO two way Valves

2012-01-29T16:18:00.000-08:00

ASCO 2-Way Valves

2011-12-18T03:48:00.000-08:00

Asco Two Way Valves by Flow Factor

Two Way valves are the most common type of valve. Two way valves turn the flow of a media ON and OFF or OFF and ON depending on whether they are Normally Open or Normally Closed.

ASCO 2-Way Solenoid Valves

ASCO's 2-Way solenoid valves have one inlet and one outlet, and are used to permit and shut off fluid flow. The two types of operations are Normally Closed (NC) and Normally Open (NO). Two types of constructions apply to 2-way solenoid valves, which are direct acting and internally piloted.

With Direct acting constructions, the solenoid is energized, the core directly opens the orifice of a Normally Closed valve or closes the orifice in a Normally Open Valve. The valve will operate at pressures from 0 psi to its rated maximum.

Internally piloted constructions use line pressure to assist operation. When the coil is de-energized (on a Normally Closed Valve), the pilot orifice is closed and line pressure is applied to the top of the piston or diaphragm through the bleed orifice, closing the valve.

ASCO's line of 2-way solenoid valves include General Service, Hot Water/ Steam, Potable Water and Food Service, Vacuum, Cryogenic and Liquid C02, Air Operated, Proportional, Intrinsically Safe, Low Power, Isolation/ Shielded Core, Long Life / Quiet, Ammonia, Dry Air, Magnetic Latching and Medical/ Analytical.

Two-way solenoid valves have one inlet and one outlet, and are used to permit and shut off fluid flow.

Two Types of Operations Apply

Normally Closed (NC)

Fluid is shut off when the coil is de-energized, flows through the valve when the coil is energized.

Normally Open (NO)

Fluid flows through the valve when the coil is de-energized, shuts off when the coil is energized.

Two Types of Constructions Apply

Direct Acting

When the solenoid is energized, the core directly opens the orifice of a Normally Closed valve or closes the orifice in a Normally Open valve. The valve will operate at pressures from 0 psi to its rated maximum. The force needed to open the valve is proportional to the orifice size and fluid pressure. As orifice size increases, so does the required force. To open larger orifices without increasing solenoid size, internal pilots are used.

Internally Piloted

These valves use line pressure to assist operation.

When the coil is de-energized (on a Normally Closed valve), the pilot orifice is closed and line pressure is applied to the top of the piston or diaphragm through the bleed orifice, closing the valve. When the coil is energized, the core opens the pilot orifice, relieving pressure from the diaphragm or piston. Line pressure, alone, opens the valve by lifting the diaphragm or piston off the main orifice.

Standard and Optional Features

Solenoid valves are supplied, as listed, with either RedHat II molded epoxy solenoids or RedHat solenoids with metal enclosures. RedHat II valves are identified by the letter “G” or “H” in their catalog numbers; e.g., 8030G016. Many optional features may be added to your valves; e.g., high-temperature Class H molded coils, manual operators, and metering devices.

General Service – Air/Inert Gas, Water, Lt. Oil (up to 300 SSU) service at moderate temperatures.

Hot Water Service – High temperature fluid applications such as laundries, molding, sterilizing, autoclaves, steam atomization, etc.

Potable Water and Food Service – NSF listed valves designed for use in drinking water systems and food service equipment.

Vacuum – Designed for Low Vacuum (to 29″Hg) to High Vacuum (to 10-6 Torr) applications.

Cryogenic and Liquid CO2 – Designed to control Cryogenic fluids to –320°F (-196°C) and Liquid CO2 to –75°F (-59°C)

Air Operated – Uses auxiliary compressed air or water source to shift valve, rather than a solenoid operator.

Proportional – Uses electrical input signal to control pressure or flow output.

Intrinsically Safe – Designed solely for use in intrinsically safe areas with properly approved and sized current and voltage limiting barriers.

Low Power – 1.4 W low wattage coil to provide PLC and DCS compatibility for BUS network and traditional wiring, reduced battery drain, reduced wiring cost, reduced temperature rise, energy savings.

Isolation / Shielded Core – Harsh and corrosive fluid control applications.

Long Life / Quiet – Designed for quiet operation and long life, up to 20 million cycles, in dry air or gas applications.

Ammonia - Designed for use with anhydrous and gaseous ammonia.

Dry Air - Designed for use in applications which require air to be free of lubricants.

Magnetic Latching - Ideal for remote applications where continuously powered devices can’t be used, such as irrigation systems.

Medical/Analytical - ASCO Miniature general service, isolation, pinch, and proportional valves are utilized for the precise and reliable control of liquids and gases in medical equipment and analytical instrumentation.

8030 Series
Direct Acting Low Pressure/Vacuum – 3/8″-3/4″
Valves available in normally closed and normally open constructions. Available in either AC or DC operated with brass or Stainless Steel bodies.

8040 Series
High Flow / Low Pressure - 1/8″-3/8″
Direct acting valves available in normally closed constructions only. Available AC operated with light weight aluminum bodies. Ideal for applications that demand high flows at low pressure.

8210 Series The Most Common Series
Air/Inert Gas, Water, Lt. Oil – 3/8″–2 1/2″ –
Solenoid pilot operated valves available in normally closed and normally open constructions. Available either AC or DC operated with Brass or Stainless Steel bodies for a wide variety of applications. Diaphragm constructions from 3/8″–1 1/2″, piston constructions from 3/8″–2 1/2″. Our most economical, high flow valve available.

8215 Series
Low Pressure - Air/Inert Gas – 3/8″–3″
Solenoid pilot operated valves available in normally closed and normally open constructions. Available either AC or DC operated with Aluminum bodies.

8221 Series
Slow Closing /Anti-Water Hammer – 3/8″-2 1/2″-
Solenoid pilot operated valves available in normally closed and normally open constructions. Available either AC or DC operated with brass bodies. Designed to effectively reduce damage caused by water hammer.

8223 Series
High Pressure – 1/4″-3/4″ –
Pilot operated solenoid valve available in a normally closed construction. They are a rugged piston construction built to withstand high pressures and are available AC or DC with brass and stainless steel bodies. Ideal for high pressure water applications (up to 1500 PSI).

8256 Series
Sub-Miniature Poppet - 1/8″
Direct acting, normally closed solenoid valves. Available either AC or DC operated in brass or 316 stainless steel bodies and with or without manual operators. Small poppet valve well suited for a wide variety of Air, Water, Lt. Oil Applications. Recommended for use in place of the 8225 Series valves.

8260 Series
Plastic Body, Air / Water – 1/4″
Direct acting valve available in a normally closed construction. Available AC or DC operated with plastic bodies designed to handle the challenges of harsh media. Ideal for water dispensing applications.

8262 Series
Direct Acting Poppet – 1/8″-1/4″
Direct acting solenoid poppet valves are available in normally closed and normally open constructions, AC or DC operated in brass or stainless steel bodies. High flow and a variety of elastomers for a wide range of applications.

8263 Series

Direct Acting Poppet, – 3/8"
Direct acting solenoid poppet valves are available in normally closed and normally open constructions, AC or DC operated in brass or stainless steel bodies. Field replaceable seat/orifice design for flexibility.

8280 Series
Group Mounted Sub-Miniature Poppet - 1/8"
Direct acting, normally closed solenoid valves. Available either AC or DC operated in brass or stainless steel bodies. Small poppet valve well suited for a wide variety of Air, Water, Lt. Oil Applications.

8210HW Series
Hot Water, Normally Closed – 3/8″–3/4″
Solenoid pilot operated diaphragm valves available either AC or DC operated with brass bodies for hot water applications.

8220 Series
Hot Water/Steam – 3/8″ – 2 1/2″-
Heavy duty pilot operated diaphragm and piston valves available in Normally Closed and Normally Open constructions. High flow capacity and long life. Available in AC and DC brass bodies. Rugged stainless steel piston ideal for the challenges of high temperature fluids.

8221HW Series
Slow Closing Hot Water – 3/8″-21/2″
Solenoid pilot operated valves available in normally closed and normally open constructions. Available AC operated with brass bodies. Designed to effectively reduce damage caused by water hammer.

8222 Series
High Temperature Fluids, Normally Closed – 1/4″ – 1″
Solenoid pilot AC operated diaphragm valves available for Hot Water/Steam applications. Brass or Stainless Steel bodies are available.

8263 Series
Direct Acting Poppet, Normally Closed – 1/8″-3/8″-
Direct acting normally closed solenoid poppet valves available either AC or DC operated in brass or stainless steel bodies. High flow with stainless steel seat and teflon or EPDM disc for steam applications. Field replaceable seat/orifice design for flexibility.

8267 Series
Direct Acting – Straight Thru Design – 3/8″-3/4″
Unique self cleaning valves with straight through design ideal for high flow hot water / steam applications. Available AC operated in normally closed and normally open constructions with brass bodies.

8256 Series
Direct Acting 1/8"- 1/4"
Direct acting, Normally Closed solenoid valves with NSF 61 and 169 approvals. Available in AC or DC voltages with 316 stainless steel bodies.

8030VM / 8030VH Series		Direct Acting – 3/8″-3/4″ Valves available AC operated in normally closed constructions with brass bodies.

8210VM / 8210VH Series		Pilot Operated Diaphragm – 3/8″–3/4″ Solenoid pilot operated valves available in normally closed and normally open constructions. Available AC operated with Brass bodies.

8215VM / 8215VH Series		Pilot Operated Diaphragm – 1″–2″ Solenoid pilot operated valves available in normally closed and normally open constructions. Available AC operated with Aluminum bodies.

8262VH Series		Direct Acting Poppet – 1/8", 1/4″ Direct acting normally closed and normally open solenoid poppet valves available AC operated with brass and stainless steel bodies.

8210LT Series		Cryogenic – 1″–1 1/2″ Solenoid pilot AC or DC operated diaphragm valves available with brass bodies for liquid oxygen, liquid argon, and liquid nitrogen applications.

8222LT Series	Cryogenic – 1/2″-3/4″ Solenoid pilot AC or DC operated diaphragm valves available with brass bodies for liquid oxygen, liquid argon, and liquid nitrogen applications.

8262LT/ 8263LT Series		Cryogenic – 1/8″-3/8″ Direct acting normally closed solenoid poppet valves available either AC or DC operated with brass bodies for liquid oxygen, liquid argon, and liquid nitrogen applications.

8264 Series		Liquid CO2 – 1/8″ - Direct acting normally closed solenoid poppet valves available either AC or DC operated with nickel plated brass bodies for liquid CO2 applications.

8290 Series

Harsh Fluids, Hot Water/Steam, Air, Water, Lt. Oil – 3/8″–2 1/2″
Heavy duty angle-body piston valves for tough applications including corrosives, light slurries and steam. Available in normally closed and normally open constructions with bronze and Stainless Steel bodies and PTFE discs.

8202 / 8203 Series

Air/Gas/Water/Lt Oil/Low Vacuum - 1/8″-1/2″
Available in 24DC operated, normally closed construction only with brass or stainless steel bodies.

WBIS8262 Series		Direct Acting Poppet – 1/4″ Direct acting normally closed solenoid poppet valves available in brass or stainless steel bodies. High flow and a variety of elastomers for a wide range of applications.

WBIS8223 Series		Piston Valve – 3/8″-1/2″ Pilot operated solenoid valves available in a normally closed construction available with brass and stainless steel bodies.

1.4 Watt 8262 Series		Direct Acting Poppet – 1/4″ Direct acting normally closed solenoid poppet valves available in brass or stainless steel bodies. High flow and a variety of elastomers for a wide range of applications

1.4 Watt 8223 Series		Piston Valve – 3/8″-1/2″ Pilot operated solenoid valves available in a normally closed construction available with brass and stainless steel bodies.

D8260 Series		Plastic Body – 1/4″ Direct acting valve available in a normally closed construction. Available AC or DC operated with plastic bodies designed to handle the challenges of harsh media.

D8030 Series		Brass/ Stainless Steel Body – 3/8″-3/4″ Direct acting valve available in a normally closed construction. Available AC operated with plastic bodies designed to handle the challenges of harsh media.

8210Q Series		5 million cycle capability – 3/8″–3/4″ Solenoid pilot operated diaphragm valves available AC operated in normally closed and normally open constructions with brass bodies.

8215Q Series		5 million cycle capability – 1″–2″ Solenoid pilot operated diaphragm valves available AC operated in normally closed and normally open constructions with aluminum bodies.

8262Q Series		20 million cycle capability – 1/8″–1/4″ Solenoid pilot operated diaphragm valves available AC operated in normally closed and normally open constructions with brass bodies.

8262 / 8263NH Series

Ammonia Service- 1/8"- 3/8"- Available in normally closed and normally open constructions with Stainless Steel bodies. Features aluminum shading coil with Neoprene elastomer. Available in AC and DC.

8262P Series

Dry Air - 1/4"- Direct acting soleonid poppet valves available in normally closed constructions with brass and stainless steel bodies.

MU8262 Series

Magnetic Latching - 1/8"-3/8" - Available in normally closed constructions with brass and stainless steel bodies. Good for applications where contiuous power supply is not readily available. DC constructions only.

www.flowfactor.com 866-360-9830 ASCO Valves

ASCO Solenoid Valves

2011-12-18T03:43:00.000-08:00

Solenoid Valves

The solenoid is an electromagnetic part of a valve, comprised of a coil, coretube, core and enclosure. ASCO Redhat brand offers the worlds largest selection of 2-, 3- and 4-way solenoid valves, designed to handle the most demanding fluid control applications.


2-Way One inlet and one outlet, and are used to permit and shut off fluid flow. The two types of operations are “Normally Closed” and “Normally Open”.

3-Way These valves have three pipe connections and two orifices. When one orifice is open, the other is closed and vice versa. They're commonly used to alternately apply pressure to and exhaust pressure from a valve actuator or a single acting cylinder. These valves can be normally closed, normally open or universal.

4-Way These valves have four or five pipe connections, commonly called ports. One pressure inlet, two cylinder ports providing pressure to double acting cylinder or actuator, and one or two outlets to exhaust pressure from the cylinders.

Condensate Drain Valve Assemblies These valves are designed to automatically drain condensate in compressed air systems. The series features standard 2-way solenoid and piloted piston valves, along with an adjustable electronic timer.

Direct Mount These Series are standard 3-way and 4-way solenoid valves whose NPT pipe connections and mounting configurations have been replaced by NAMUR mounting configuration. This allows each valve to be mounted directly to an actuator without the use of hard piping or tubing.

Dust Collector These series are high-flow fast-opening 2 way valves, pilot valves, pilot valve enclosures and bulkhead fittings that have been specially designed for use in dust collector systems.

Group Mounted These series are 2-way, 3-way and 4-way 2-position valves that are designed for gang mounting into different quantities of valves. Any combination of normally closed, normally open or universal valves may be grouped together.

Isolation Isolation valves incorporate a diaphragm that shields the fluid flowing through the valve from the internal solenoid components making them ideal for handling corrosive or high purity fluids. These valves are available with in-line porting or manifold constructions and in a wide variety of inert materials.

Manual Reset These series are standard 2-way, 3-way and 4-way 2-position valves that use a manual reset assembly in replacement of the solenoid. They are designed to prevent inadvertent valve startup in their designed failure modes. These series are available in no voltage release, electrically tripped, and free handle constructions as well as latched open or latched closed for 2-way valves.

Medical/Analytical Micro-Miniature General Service, Isolation, and Pinch valves for the reliable control of fluids and gases in medical equipment and analytical instrumentation.

Pinch Pinch valves are designed to control the flow of fluid by locating soft tubing in a mechanism that "pinches" the tubing to block flow and releases to allow flow. Pinch valves are suitable for corrosive fluids, high purity applications, or fluids with particulate.

S Series ASCO commercial application solenoid valves. Developed and engineered with ASCO's global resources. ASCO S is a compact solution for 2-way, 3-way and steam valve applications and can operate in 15°F to 125°F ambient temperature locations. This solution includes DIN connection for easy wiring, compact brass bodies and encapsulated coils. Options include 15" leads, alternate elastomers, manual operators, and mounting brackets.

Options/Accessories ASCO offers a wide variety of accessories and optional features to meet your specific application requirements. Visit Flow Factor for your Solenoid Valve Needs. 866-360-9830

Commercial/Industrial Pumps by Armstrong

2011-12-09T03:19:00.000-08:00

Armstrong Pumps at Flow Factor

Series 4300 Split Coupled Vertical In-Line

Armstrong's vertical in-line pump represents a design innovation that has repeatedly proven its value over the past 30 years. Armstrong took a leadership role in improving the efficiency and utility of commercial pumps by designing and marketing the vertical in-line pump in the early 1970s. Armstrong takes a leading role in educating engineers around the world on the value of vertical in-line pump installations, and offers one of the widest range of vertical in-line pump sizes in the industry. The Armstrong 4300 split coupled vertical in-line pump includes both a silicon carbide seal and an outside balanced seal as standard items. Armstrong vertical in-line pumps combine excellent operating efficiency, with very low vibration and noise. As well, Armstrong offers a very valuable design/assist program whereby an internal designer will work with contractors and engineers to ‘lay out' and mechanical room using vertical technology. In past instances, substituting vertical pumps for horizontal, in addition to reorganizing and repositioning mechanical room components has led to tremendous cost savings in piping and system efficiency.

IVS and IVS Sensorless Variable Speed Pumps

The Armstrong IVS Sensorless pump is designed to meet the need for energy-efficient pumping systems in today's buildings. Traditional smaller pumping systems, up to and including 10 hp, incorporating fixed-speed pumps waste energy through crude throttling valve flow control. Lifetime Cost Analysis shows that the capital cost of a fixed-speed pump is typically only 5% of its lifetime cost.

The IVS Sensorless pump is a new generation variable-speed pump, completely integrated into a compact package. Pressure transducers/sensors are no longer required, which reduces the installed cost of the unit and makes it practical to use these IVS variable-speed pumps in a retrofit installation.

Applications for this technology include variable volume heating and chilled water applications. The design of the Armstrong IVS Sensorless pump goes beyond ASHRAE 90.1 standards, providing the benefits of variable speed technology for motor sizes below 10 hp.

Variable speed technology allows the speed of the pump to be tuned to suit system demand.
Technological advancements make variable speed pumps attractive in terms of both capital and lifetime cost.
Pressure transducers/sensors are no longer required, further reducing capital and installation cost.
The IVS Sensorless pump is a new generation pump, completely integrated into a compact package.
Applications for this technology include variable volume heating and chilled water applications.
Goes beyond ASHRAE 90.1 standards by adding value through varying pump speed with 10 hp and lower motor sizes.

Series 4302 and 4382 Vertical In-Line dualArm Pumps

Armstrong’s new dualArm vertical in-line pumps incorporate two Series 4300 or 4380 pumps in a single casing. Series 4302 is designed with split spacer type couplings, so that the mechanical seals may be serviced without disturbing the pump or motor connections, and is available with outside balanced or inside seals. Series 4382 is the economical close coupled design. Each type is supplied with a swing discharge port to hydraulically separate the casings to prevent recirculation when only one pump operates. Isolation valves enable one pump to be isolated for service or removal with the second pump still operating.

Series 4360 and 4380 Close Coupled Vertical In-Line

VERTICAL IN-LINE SERIES 4360
Armstrong’s economical, lower-range vertical inline pump for HVAC, domestic water systems, and industrial applications requiring a compact pump. Positive sealing assured by proven inside-type mechanical seal. Radially split volute permits removal of the motor and pump rotating assembly without removing the pump volute from the line. Fewer maintenance and servicing problems due to bearing-free pump design. Available in bronze fitted, all bronze, or all iron construction, in a range of sizes.

VERTICAL IN-LINE SERIES 4380
Armstrong’s close-coupled vertical in-line pump features economical inside-type, single-spring mechanical seal, serviced by removing the rotating assembly while the pump casing remains in the line. Dynamically balanced impeller assures smooth, vibration-free operation. Radially split volute with equal suction and discharge flange sizes. Separate tapped openings for gauge, flush and drain connections. Available in bronze fitted, all bronze, all iron, and ductile iron construction.

Series 4030 and TD40 Base Mounted Pumps

Motor mounted version of the horizontal end suction pump, with flanged connections. Radially-split volute with center-line discharge. Motor features heavy duty, grease-lubricated ball bearings. Supplied with self-lubricating mechanical seal and bronze balanced cast impeller designed for smooth performance and long life. Available in bronze fitted, all bronze and all iron construction.

Series 4600 HSC Horizontal Split Case

The Series 4600 is the state of the art Horizontal Split Case pump – based on the "Tilted Parting" concept to minimize turbulence at the eye of the impeller by its straight laminar approach, thus maximizing efficiency. This also results in the lowest profile and minimum floor space of any HSC pump, lowering installation costs. Cartridge seals and bearing removal nuts ensure ease of maintenance.

Series 4700 Vertical MultiStage Pumps

Environmental Engineering:
Armstrong Series 4700, designed for temperatures ranging from 5°F to 250°F (-15°C to 120°C), are well suited for boiler feed applications, condensate recovery and air conditioning systems. Easy to incorporate into industrial environmental engineering equipment, our Vertical MultiStage pumps combine the advantages of compact design, quiet operation and ease of maintenance.

Water Distribution:
From basic water supply to the most specific pressure boosting and fire line pressure maintenance applications, Armstrong Series 4700 Vertical MultiStage pumps satisfy all water distribution requirements. The wide pressure range - from 10 psig to 430 psig (0.7 bar to 30 bar) - makes this product well suited for applications such as pressure washing of aircraft, trains, boats and road vehicles as well as spray washing of industrial parts and electronic components.

Industry:
Water feed to machine tools, grease removal, cooling of lathes and molds ... water has many uses in the industrial market. The stainless steel design and wide temperature parameters of the Series 4700 Vertical MultiStage pump makes it an ideal unit for light industrial applications.

Water Treatment:
Water is becoming a precious commodity. Water transportation, demineralization, filtration, deionization and reverse osmosis all call for high pressure supply and hygienic considerations. The Armstrong Series 4700 Vertical MultiStage pump is made entirely with stainless steel wetted components, for most sizes and is well suited for these applications.

Agriculture:
The excellent hydraulic efficiency of the Armstrong Series 4700 makes this pump a great choice for irrigation and sprinkling applications. Whether irrigating large farms or sprinkling parks and golf courses, the Armstrong stainless steel pump stages provide the best hydraulic efficiency in all power ranges. The compact design allows the best utilization of available space in pumping stations.

Series 4270 and 4270 Stock Motor Mounted Pumps

Close coupled, motor mounted pump is available in bronze-fitted and all-bronze construction. All models provide tapped openings for venting, draining, and gauge connections. Featuring heavy duty, permanently lubricated motor bearings, Viton seals as standard, non-ferrous engineered resin impeller, stainless steel faceplate and single spring inside mechanical seal.

Motors

Armstrong HE Series motors are general purpose polyphase squirrel cage induction motors meeting all required NEMA and IEEE standards. In addition to numerous in-factory sampling motor tests to verify and improve designs, motors have been tested at Hydro-Quebec’s independent motor testing laboratory in Canada. Armstrong HE Series TEFC motors from 1 hp to 100 hp currently meet or exceed the efficiency requirements of the US Energy Policy Act of 1992 (EPAct) and Natural Resource Canada Standards (NRCan).

Visit Flow Factor for all you pump needs!

Armstrong Circulators ~ Pumps

2011-12-08T06:59:00.000-08:00

Flow Factor and Armstrong Circulators

We can provide any Armstrong pump you need.

The below parts for for hot water circulation in a home.

Armstrong Astro hot water re-circulation systems automatically circulate water through domestic hot water distribution pipes. This helps to ensure that everyone in the household has “instant” hot water at the tap when they need it, while also helping to conserve water and save water heating energy costs. All systems are assembled, wired, tested and then shipped from the factory, ready for installation.

20B050S-TA 20B075S-TA

25B050S-TA 25B075S-TA

20BU-TA

25BU-TA 20BF-TA

30B-TA

50B-TA 70B-TA

20B050S-T 20B075S-T 25B050S-T

25B075S-T 20BU-T

25BU-T

20BF-T 30B-T

50B-T

70B-T 20B050S-LC

20B075S-LC 25B050S-LC 25B075S-LC

20BU-LC 25BU-LC

20BF-LC

30B-LC 50B-LC

70B-LC

Flow Factor also has hot water heaters, pressure switches, temperature switches, jet pumps, flow sites and electric heaters.

Explosion Proof Barksdale Switches

2011-11-26T04:07:00.000-08:00

Barksdale Explosion Proof Diaphragm switches

D1X-A3SS-UL This Explosion-Proof Barksdale Pressure Switch p/n D1X-A3SS-UL is a weld-sealed metal diaphragm, SINGLE setting, SPDT local mount 1/4 inch NPT Pressure Switch. This Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The D1XA3SS-UL has covered terminal strip and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. Barksdale D1X-A3SS-UL SINGLE setting diaphragm explosion proof pressure switch. UL and CSA rated.

D1X-H18SS-UL This Explosion-proof Barksdale Pressure Switch p/n D1X-H18SS-UL is a weld-sealed metal diaphragm, SINGLE setting, SPDT local mount 1/4 inch NPT Pressure Switch. This Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The D1XH18SS-UL has covered terminal strip and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. Barksdale D1X-H18SS-UL SINGLE setting diaphragm explosion proof pressure switch. UL and CSA rated.

D1X-A80SS-UL This Explosion-Proof Barksdale Pressure Switch p/n D1X-A80SS-UL is a weld-sealed metal diaphragm, SINGLE setting, SPDT local mount 1/4 inch NPT Pressure Switch. This Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The D1XA80SS-UL has covered terminal strip and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. Barksdale D1X-A80SS-UL SINGLE setting diaphragm explosion proof pressure switch. UL and CSA rated.

D1X-H150SS-UL This Explosion-proof Barksdale Pressure Switch p/n D1X-H150SS-UL is a weld-sealed metal diaphragm, SINGLE setting, SPDT local mount 1/4 inch NPT Pressure Switch. This Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The D1XH150SS-UL has covered terminal strip and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. Barksdale D1X-H150SS-UL SINGLE setting diaphragm explosion proof pressure switch. UL and CSA rated.

D2X-A3SS-UL This Explosion-Proof Barksdale Pressure Switch p/n D2X-A3SS-UL is a weld-sealed metal diaphragm, DUAL setting, SPDT local mount 1/4 inch NPT Pressure Switch. This Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The D2XA3SS-UL has covered terminal strip and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. Barksdale D2X-A3SS-UL DUAL setting diaphragm explosion proof pressure switch. UL and CSA rated.

D2X-H18SS-UL This Explosion-proof Barksdale Pressure Switch p/n D2X-H18SS-UL is a weld-sealed metal diaphragm, DUAL setting, SPDT local mount 1/4 inch NPT Pressure Switch. This Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The D2XH18SS-UL has covered terminal strip and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. Barksdale D2X-H18SS-UL DUAL setting diaphragm explosion proof pressure switch. UL and CSA rated.

D2X-A80SS-UL This Explosion-Proof Barksdale Pressure Switch p/n D2X-A80SS-UL is a weld-sealed metal diaphragm, DUAL setting, SPDT local mount 1/4 inch NPT Pressure Switch. This Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The D2XA80SS-UL has covered terminal strip and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. Barksdale D2X-A80SS-UL DUAL setting diaphragm explosion proof pressure switch. UL and CSA rated.

D2X-H150SS-UL This Explosion-proof Barksdale Pressure Switch p/n D2X-H150SS-UL is a weld-sealed metal diaphragm, DUAL setting, SPDT local mount 1/4 inch NPT Pressure Switch. This Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The D2XH150SS-UL has covered terminal strip and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. Barksdale D2X-H150SS-UL DUAL setting diaphragm explosion proof pressure switch. UL and CSA rated.

P1X-H30 This Explosion-proof BARKSDALE Pressure Switch p/n P1X-H30 is a Dia-Seal Piston pressure switch with BUNA-N diaphragm, SINGLE setting, SPDT local mount 1/4 inch Aluminum NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is .5 - 30 PSI with differential reset point .1 - 1.5 psi. The P1XH30 has screw terminals on snap action switch and has a tamperproof external adjustment. Snap Action switch is rated 10 amps 120 or 240 VAC. BARKSDALE P1X-H30 SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

P1X-J30 This Explosion-proof BARKSDALE Pressure Switch p/n P1X-J30 is a Dia-Seal Piston pressure switch with BUNA-N diaphragm, SINGLE setting, SPDT local mount 1/4 inch Aluminum NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is .5 - 30 PSI with differential reset point .1 - 1.0 psi. The P1XJ30 has screw terminals on snap action switch and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. BARKSDALE P1X-J30 SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

P1X-M30 This Explosion-proof BARKSDALE Pressure Switch p/n P1X-M30 is a Dia-Seal Piston pressure switch with BUNA-N diaphragm, SINGLE setting, SPDT local mount 1/4 inch Aluminum NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is .5 - 30 PSI with differential reset point .1 - 1.0 psi. The P1XM30 has screw terminals on snap action switch and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC and .5 amps at 125 VDC. BARKSDALE P1X-M30 SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

P1X-J30SS-V This Explosion-proof BARKSDALE Pressure Switch p/n P1X-J30SS-V is a Dia-Seal Piston pressure switch with VITON diaphragm, SINGLE setting, SPDT local mount 1/4 inch Stainless Steel NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is .5 - 30 PSI with differential reset point .1 - 1.5 psi. The P1XJ30SS-V has screw terminals on snap action switch and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. BARKSDALE P1X-J30SS-V SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

P1X-J85 This Explosion-proof BARKSDALE Pressure Switch p/n P1X-J85 is a Dia-Seal Piston pressure switch with BUNA-N diaphragm, SINGLE setting, SPDT local mount 1/4 inch Aluminum NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is 3-85 PSI with differential reset point .25 - 3.5 psi. The P1XJ85 has screw terminals on snap action switch and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. BARKSDALE P1X-J85 SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

P1X-M85 This Explosion-proof BARKSDALE Pressure Switch p/n P1X-M85 is a Dia-Seal Piston pressure switch with BUNA-N diaphragm, SINGLE setting, SPDT local mount 1/4 inch Aluminum NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is 3-85 PSI with differential reset point .25 - 3.5 psi. The P1XM85 has screw terminals on snap action switch and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC and .5 amps at 125 VDC.BARKSDALE P1X-M85 SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

P1X-J85SS-V This Explosion-proof BARKSDALE Pressure Switch p/n P1X-J85SS-V is a Dia-Seal Piston pressure switch with VITON diaphragm, SINGLE setting, SPDT local mount 1/4 inch Stainless Steel NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is 3-85 PSI with differential reset point .25 - 3.5 psi. The P1XJ85SS-V has screw terminals on snap action switch and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. BARKSDALE P1X-J85SS-V SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

P1X-J340 This Explosion-proof BARKSDALE Pressure Switch p/n P1X-J340 is a Dia-Seal Piston pressure switch with BUNA-N diaphragm, SINGLE setting, SPDT local mount 1/4 inch Aluminum NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is 6-340 PSI with differential reset point 1 - 8.5 psi. The P1XJ340 has screw terminals on snap action switch and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. BARKSDALE P1X-J340 SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

P1X-M340 This Explosion-proof BARKSDALE Pressure Switch p/n P1X-M340 is a Dia-Seal Piston pressure switch with BUNA-N diaphragm, SINGLE setting, SPDT local mount 1/4 inch Aluminum NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is 6-340 PSI with differential reset point 1 - 8.5 psi. The P1XM340 has screw terminals on snap action switch and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC or .5 amps @ 125VDC. BARKSDALE P1X-M340 SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

P1X-J340SS-V This Explosion-proof BARKSDALE Pressure Switch p/n P1X-J340SS-V is a Dia-Seal Piston pressure switch with VITON diaphragm, SINGLE setting, SPDT local mount 1/4 inch Stainless Steel NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is 6-340 PSI with differential reset point 1 - 8.5 psi. The P1XJ340SS-V has screw terminals on snap action switch and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. BARKSDALE P1X-J340SS-V SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

P1X-J600 This Explosion-proof BARKSDALE Pressure Switch p/n P1X-J600 is a Dia-Seal Piston pressure switch with BUNA-N diaphragm, SINGLE setting, SPDT local mount 1/4 inch Aluminum NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is 25-600 PSI with differential reset point 2.0 - 19 psi. The P1XJ600 has screw terminals on snap action switch and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. BARKSDALE P1X-J600 SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

P1X-M600 This Explosion-proof BARKSDALE Pressure Switch p/n P1X-M600 is a Dia-Seal Piston pressure switch with BUNA-N diaphragm, SINGLE setting, SPDT local mount 1/4 inch Aluminum NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is 25-600 PSI with differential reset point 2.0 - 19 psi. The P1XM600 has screw terminals on snap action switch and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC or .5 amps @ 125 VDC. BARKSDALE P1X-M600 SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

P1X-J600SS-V This Explosion-proof BARKSDALE Pressure Switch p/n P1X-J600SS-V is a Dia-Seal Piston pressure switch with VITON diaphragm, SINGLE setting, SPDT local mount 1/4 inch Stainless Steel NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is 25-600 PSI with differential reset point 2.0 - 19 psi. The P1XJ600SS-V has screw terminals on snap action switch and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. BARKSDALE P1X-J600SS-V SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

P1X-J1600 This Explosion-proof BARKSDALE Pressure Switch p/n P1X-J1600 is a Dia-Seal Piston pressure switch with BUNA-N diaphragm, SINGLE setting, SPDT local mount 1/4 inch Aluminum NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is 400-1600 PSI with differential reset point 20 - 80 psi. The P1XJ1600 has screw terminals on snap action switch and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. BARKSDALE P1X-J1600 SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

P1X-J1600SS-V This Explosion-proof BARKSDALE Pressure Switch p/n P1X-J1600SS-V is a Dia-Seal Piston pressure switch with VITON diaphragm, SINGLE setting, SPDT local mount 1/4 inch Stainless Steel NPT Pressure Switch. This BARKSDALE Pressure switch is rated for indoor or outdoor NEMA 4, 7 and 9 Explosion-Proof service. The pressure range is 400-1600 PSI with differential reset point 20 - 80 psi. The P1XJ1600SS-V has screw terminals on snap action switch and has a tamperproof external adjustment. Switch is rated 10 amps 120 or 240 VAC. BARKSDALE P1X-J1600SS-V SINGLE setting dia-seal piston explosion proof pressure switch. UL and CSA rated.

Other products by Flow Factor:

Penberthy Jet Pumps

Penberthy Flow Sites

Armstrong Pumps

Fenwal Switches

Solenoid Valves

Immersion Heaters

Gas Meters

Level controls

Barksdale Pressure Switches ~ Sealed Piston

2011-11-02T15:19:00.000-07:00

Barksdale Pressure Swtiches ~ Sealed Piston Switches

Throughout the world, Barksdale components can be found in steel mills, on machine tools, in auto plants, in power generation and distribution facilities, in chemical processing plants, in pulp and paper mills, textile mills, amusement parks, and food processing plants, on offshore drilling rigs, in oil and natural gas fields, rescue equipment, and on many forms of transportation equipment, both on- and off-road. Many industries use a variety of Barksdale's product lines. E.g. in mobile- and stationary hydraulic systems: from hydraulic clamping in machine tooling, hydraulic steering systems off highway loaders or load monitoring on crane support struts to vertical cargo lifts and elevators. In almost every industry, Barksdale products are at work, helping to build a better tomorrow.

Series 9617

Sealed Piston

Rapid cycling at high pressure up to 7,500 psi

Applications

Factory automation
Hydraulic presses
Compactors and balers
Hydraulic controllers
Machine tools

Barksdale's 9617 Series Sealed Piston Pressure Switches offer extremely long life in a robust package, making them the ideal solution to your industrial pressure control needs. Sealed Piston Pressure Switches are ideal for applications demanding rapid cycling at high pressure. Available in various pressure ranges up to 7500 psi, sealed piston switches are suitable for use in industrial applications such as hydraulic presses, compactors, and machine tools. All models feature a durable, anodized aluminum enclosure with a tamper proof adjustment screw cover and an integrated 1/2" NPT conduit connector, and are rated to NEMA 4 as a standard. A clear cover allows easy viewing of the calibrated adjustment scale. For applications requiring a highly accurate switch in a durable package, Barksdale's 9617 Series Sealed Piston Pressure Switches are the ideal choice.

Series 9675, A9675

Sealed Piston, Double Make, Double Break

Durable, long life, rapid cycling at high pressure up to 6,000 psi

Applications

Hydraulic applications
Machine tools
Compressors
Mining
Specialty vehicles
Lubrication equipment
Metal working

Barksdale's Series 9675 & A9675 Sealed Piston Pressure Switches offer extremely long life in a robust package, making them the ideal solution to your industrial pressure control needs. Sealed Piston switches are ideal for applications demanding rapid cycling at high pressure. Available in various pressure ranges up to 6000 psi, sealed piston switches are suitable for use in industrial applications such as hydraulic presses, compactors, and machine tools. All models feature a durable, anodized aluminum enclosure with a tamper proof adjustment screw cover and an integrated 1/2" NPT conduit connector, and are rated to NEMA 13 as a standard. For applications requiring a highly accurate switch in a durable package, Barksdale's Series 9675 & A9675 Sealed Piston Pressure Switches are the ideal choice.

C9612, C9622 Series

Visual Indicating Sealed Piston Switch

Long life, high cycling, single & dual switches, pressure from 15 - 3,000 psi

Applications

Compactors & balers
Machine tools
Lubrication equipment
Hydraulic presses
Railroad
Hydraulic power units
Compressors
Utility & power generation
Metal working application

Barksdale's Series C9612 and C9622 Sealed Piston Pressure Switches offer extremely long life in a robust package, making them the ideal solution to your industrial pressure control needs. Sealed Piston switches are ideal for applications demanding rapid cycling. Available in various pressure ranges from 15 to 3000 psi, sealed piston switches are suitable for use in industrial applications such as hydraulic presses, compactors, and machine tools. All models feature a durable, anodized aluminum enclosure with a tamper proof adjustment screw cover and an integrated 27/32" hole for 1/2" NPT conduit connector, and are rated to NEMA 3 as a standard. Optional terminal boxes allow for ease of electrical connection, and switches are available in both single and dual circuit configurations. For applications requiring a highly accurate switch in a durable package, Barksdale's Series C9612 and C9622 Sealed Piston Pressure Switches are the ideal choice.

Series 9048

Sealed Piston

Rapid cycling at high pressure up to 12,000 psi

Applications

Machine tools
Hydraulic presses
Compactors
Hydraulic power units
Compressors

Barksdale's Series 9048 Sealed Piston Pressure Switches offer extremely long life in a robust package, making them the ideal solution to your industrial pressure control needs. Sealed Piston switches are ideal for applications demanding rapid cycling at high pressure. Available in various pressure ranges up to 12,000 psi, piston switches are suitable for use in industrial applications such as hydraulic presses, compactors, and machine tools. All models feature a durable, anodized aluminum enclosure with an integrated ½" NPS conduit connector, a tamper-resistant setpoint adjustment screw, and are rated to NEMA 13 as a standard. An optional terminal box with built-in conduit connector simplifies wiring connections. For applications requiring a highly accurate switch in a durable package, Barksdale's Series 9048 Sealed Piston Pressure Switches are the ideal choice.

Visit Flow Factor At:

www.flowfactor.com

216-765-4231

Pressure Switches - Diaphragm - Barksdale

2011-10-30T13:34:00.000-07:00

Barksdale is the World's leader in Pressure Switches, Sensors and Tranducers. Barksdale Electro-Mechanical pressure switches are industry standards. The diaphragm ( D1H, D1T, D2T, D2H ) and Bourdon tube ( B1T, B1H, B2H, B2H ) switches offer industry leading accuracy. For Long life and /or fast switching choose Barksdale's piston ( C96, 9600 ) or dia-seal piston ( P1H, MSPS, E1H, E1S ) switches.

Barksdale Diaphragm Pressure Switches

D1S, D2S, D1H, D2H Series

Barksdale's Diaphragm Pressure Switches offer superior accuracy in a robust package, making them the ideal solution to your industrial pressure

control needs. Diaphragm switches are ideal for applications demanding instrument class accuracy and where pressure pulsations are less than 25 cycles per minute. Available in various pressure ranges up to 150 psi, diaphragm switches are suitable for use in either positive pressure or vacuum applications. Single, and dual, and triple circuit models are available.

Housed models (D1H & D2H) feature a durable, anodized aluminum enclosure with an integrated 1/2" NPT conduit connector,a tamper-resistant cover for the setpoint adjustment screws, and are rated to NEMA 4 as a standard. For applications requiring a highly accurate switch in a durable package, Barksdale's Diaphragm Pressure Switches are the ideal choice.

Stripped and housed versions available
High accuracy
Ideal for pressure or vacuum
Easy setpoint adjustment
NEMA 4 (Housed Models)
Up to 3 setpoints available in one switch
Diaphragm SealOption Available

Barksdale's D1T & D2T Terminal Block Diaphragm Pressure Switches offer superior accuracy in a robust package, making them the ideal solution to your industrial pressure control needs. These switches are ideal for applications requiring water-tight, NEMA 4 housings a covered terminal strip and tamper-proof external adjustment. (Factory set models are also available.) With pressure ranges up to 150 psi, these housed diaphragm pressure switches are suitable for use in either positive pressure or vacuum applications. Sin

gle- and dual-circuit models are available. Housed models feature a durable, anodized aluminum enclosure. For applications requiring a highly accurate switch in a durable package, Barksdale's D1T & D2T Terminal Block Diaphragm Pressure Switches are the ideal choice.

High reliability
High accuracy
NEMA 4
Ideal for pressure and vacuum applications
Single and dual switching capability
Tamper-proof external adjustment
Diaphragm Seal Option Available

Barksdale's D1X and D2X Explosion Proof Diaphragm Pressure Switches offer high accuracy and reliability, providing an ideal solution for your hazardous locations pressure control requirements. With vacuum and positive pressure ranges to 150 psi, NEMA 4,7,& 9 enclosures, a covered terminal strip and tamper-proof external adjustment, Barksdale D1X and D2X Explosion Proof Diaphragm Pressure Switches meet your needs in a wide variety of applications. These switches are available in single setting or dual control. An internal set screw allows for easy internal adjustment of setpoints. For applications requiring a highly accurate switch in a durable packag

e, Barksdale's Explosion Proof Diaphragm Pressure Switches are the ideal choice.

Hermetically sealed
Explosion proof housing for hazardous location
Tamper proof setpoint adjustment
Ideal for pressure or vacuum
Diaphragm Seal Option Available
High Accuracy and Reliability

Barksdale's CD1H and CD2H Housed Diaphragm Pressure Switches provide an ideal solution for pressure control applications requiring tamper proof external adjustment and environments which require water-tight NEMA 4 housings. These pressure switches are available in single or dual control settings for both positive pressure and vacuum models, to 150 psi. These snap-action switches may be wired normally open or normally closed through a 3/4"-14 NPT conduit connector to free leads to 18". All models feature self-locking set screw adjustment and dials which are calibrated for increasing setting. For applications requiring a highly accurate switch in a durable package, Barksdale's CD1H and CD2H Housed Diaphragm Pressure Switches are the ideal choice. Stripped models are also available.

High reliability
Extremely versatile
Calibrated dial for easy setpoint adjustment
Ideal for pressure or vacuum
Diaphragm Seal Option Available

For all your Flow needs, visit our web site, www.flowfactor.com

Flow Control Products from Flow Factor

2011-10-28T13:28:00.000-07:00

Flow Factor provides Industry with Flow Control Products for Process and Liquid control.

Some of our products include Solenoid Valves, Pumps, Flow Sites, Level Controls, Eductors,Temperature Switches, Pressure switches, Meters, Gas Meters, Flow Meters, Floats and hot water heaters.

Some of our Brands include ASCO, Barksdale, Parker, Penberthy, Fenwal, SSAC, Carlo Gavazzi, Armstrong, MDI, American Meter, Dwyer, Ametek, Robertshaw, Process Technology and Princo.

Please call or email with your application. We can Help.

www.flowfactor.com

Contact Flow Factor

American Meter Regulators for Natural Gas

2010-11-27T14:32:00.000-08:00

Elster American Meter gas pressure governors and regulators meet the highest demands concerning quality and capacity. The products range reaches from small low pressure domestic, medium and high pressure regulators, spring or pilot-operated, through the full field of application also to LPG equipment and purpose built regulator/metering units.

Low Pressure Delivery Regulators

(5 psig or less)

Once the decision has been made that a low-pressure regulator is needed, there are various options available in regulators that should be considered. Elster American Meter offers different regulator models that include options for protection against abnormal operating conditions. The most common options being:

Internal relief (partial or full)
Overpressure Shut-Off (OPSO)
Underpressure Shut-Off (UPSO)
Remote Sensing

Each series of low-pressure regulators offer various combinations of inlet/outlet pressure ranges and maximum capacities. Elster American Meter has various low-pressure regulators to fit your need.

Medium Pressure Delivery Regulators

(6 to 60 psig)

Once the decision has been made that a medium-pressure regulator is needed, there are various options available in regulators that should be considered. Elster American Meter offers different regulator models that include options for protection against abnormal operating conditions. The most common options being:

Internal relief (partial or full)
Overpressure Shut-Off (OPSO)
Underpressure Shut-Off (UPSO)
Remote Sensing

Each series of medium-pressure regulators offer various combinations of inlet/outlet pressure ranges and maximum capacities. Elster American Meter has various medium-pressure regulators to fit your need.

High Pressure Delivery Regulators

(Over 60 psig)

Once the decision has been made that a high-pressure regulator is needed, there are various options available in regulators that should be considered. Elster American Meter offers the Axial Flow Valve.

The Axial flow valve can be used for pressure regulation, over pressure relief, flow control or act as an on/off valve. This unique design provides a valve that is extremely compact and lightweight.

Penberthy Jet Pumps / Eductors

2010-11-15T06:23:00.000-08:00

Simple Jet Pump Design Offers Economical Solutions for Many Complex Process Operations!

Providing a practical alternative to more complicated and expensive methods, Penberthy jet pumps offer simple, more cost-effective ways to pump, mix or heat a wide range of liquids and gases used in the process industry. Jet pumps can operate with a wide variety of motive liquids and gases. If you recognize any of the following, you can probably use a Penberthy jet pump.

•	Injector	•	Eductors
•	Exhausters	•	Boosters
•	Ejectors	•	Kinematic Pumps
•	Siphons

Penberthy jet pumps have a myriad of uses. Jet pumps not only pump liquids, they can also heat, mix and blend either in-line or in-tank. Jet pumps can evacuate gases, create a vacuum, boost suction pressures, mix granular solids with liquids and move granular solids with compressed air. In fact, you will be suprised at what a jet pump can do to solve your problem.

The purpose of this section and its associated pages is to identify the many uses for jet pumps, to identify pumps for specific processing operations and perhaps recognize new ways to use jet pumps to reduct costs and optimize your plant's efficiency. Penberthy invites you to explore the possibilities of jet pump use in your operation. You might be surprised at the many ways jet pumps can help improve your company's profitability!

Penberthy jet pumps can provide a practical alternative to more complex - and costly - process components when a simple, cost-effective way to pump, mix or heat is the answer to your process need. Reliable operation from a variety of power sources allow jet pumps to perform effectively on a wide array of process applications.

Not only can jet pumps be used to perform singular duties such as pumping liquids to drain sumps and tanks, or heating liquids in-tank for cooking or circulating, but they can also be used to achieve these functions simultaneously. For example, you can heat liquids as they are pumped for producing scalding sprays, or mix liquids in-tank while adding a second liquid at the same time.

Simple operation
While Penberthy jet pumps differ in appearance, all operate basically the same way. An operating fluid under pressure enters through the inlet and travels through the nozzle -- where it is converted to a high-velocity stream which decreases the air pressure in the suction chamber, creating a partial vacuum that draws material to that area where it is entrained by the operating medium. The entrained material is then carried through to the discharge outlet and dispelled at a pressure greater than that of the suction stream but lower than that of the operating medium.

Inherent reliability
The reliability of Penberthy jet pumps is inherent in their simple design: no moving parts, no required lubrication, little maintenance, easy installation without special structures or foundations. All are self-priming. And all Penberthy models are available in a variety of materials to maximize worry-free service life.

A choice of operating sources
Penberthy jet pumps let you choose the operating source that's most convenient for your application. These include aqueous and non-aqueous liquids, steam or even compressed gas. Economical sources which may already be available at your existing facility. And possibly more accessible than another power source such as electricity.

General Listing of Applications

Terms

Motive - the fluid used to "power" the eductor
Suction - the secondary fluid being educted
Discharge - the combined motive/suction fluid stream exiting the eductor

Standard Cast Materials of Construction

Low Lead Bronze
Iron
Carbon Steel
316 STS

Purchase Penberthy Jet Pumps at Flow Factor or call 866-360-9830

Parker Solenoid Valves ~ Fluid Control

2010-11-14T14:59:00.000-08:00

Parker Fluid Control Division is a world-wide market leader of solenoid valves that control motion, flow and pressure.

With manufacturing facilities strategically placed around the world we are prepared to meet your needs wherever they may be. Our facilities located in U.S.A, Brazil, Italy, Switzerland and South Korea are equipped with a complete staff of experienced design engineers permitting rapid completion of customized valve designs for specific user requirements. Also, each facility has well equipped evaluation and testing laboratories to ensure proper valve operation, long cycle life, and optimum reliability of the product for the application.

With sales affiliates worldwide, an extensive distribution network, and broad product breadth, Parker Fluid Control Division is in a unique position to service the world’s requirements for solenoid valves.

Parker Fluid Control product line consists of; Gold Ring™, Skinner Valve™, Sinclair Collins®, Lucifer™ and Jackes Evans™. These product lines make Parker Fluid Control Division, the leading supplier of products controlling motion, flow and pressure.

Parker Fluid Control products have been designed to offer customers the ultimate in performance, versatility and quality. Every valve is engineered for optimal operation, is constructed with modern machinery that uses stringent processes to provide our customer with a quality driven product. Parker Fluid Control truly has a world class product offering.

Compatible Fluids
Lubricated Air, Non-Lubricated Air, Inert Gases, Water, Hydraulic Fluids, Petroleum Products and additional fluids compatible with materials of construction. Use of non-lubricated gaseous media will substantially limit valve life.

2 WAY Valves have two ports, an inlet and outlet. The media is turned off and on but the solenoid, in either a normally open or normally closed configuration.

2 WAY ANTIWATER HAMMER VALVES

2 WAY DIRECT ACTING VALVES

2 WAY DIRECT LIFT VALVES

Parker Fluid Control's Direct Lift valves are designed to have the plunger directly open or close the valve as the seating disc is attached to the plunger. These valves are used in a variety of applications including: Material Transfer, Molding, Vending Machines, Instrumentation, Welding Equipment, Water Treatment Systems, Spray Equipment, Dental Equipment, Laundry Equipment, Food Processing Machinery.

2 WAY HIGH PRESSURE VALVES

Parker Fluid Control High pressure line is designed to meet ratings as high as 3000 psi. The High pressure line is used in a variety of applications including: Blow Molding, Compressors, Car Washer Equipment and Pumps.

2 WAY INTRINSICALLY SAFE

Parker Fluid Control's intrinsically safe valve offering provide a number of significant performance advantages: Low-PowerConsumption; Low Temperature Rise; a Wide Range of Sizes; a Variety of Mounting Possibilities; Media Compatibility; a Wide Selection of Options; and Watertight Construction. The intrinsically safe solenoid valves have approvals for use in the United States and Canada in hazardous classifications for Classes I, II, III, Division 1 and 2, and in the United Kingdom for Division 0, 1 and 2. In Europe our valves are approved according to CENELEC standards.

2 WAY PILOT OPERATED VALVES

Parker Fluid Control's pilot operated valves are used in a variety of applications including: Automated Systems, Dispensing Systems, Instrumentation, Welding Equipment, Restaurant Equipment, Food Processing Machinery, Water Treatment Systems and Laundry Equipment.

2 WAY REMOTE PRESSURE OPERATED VALVES

2 WAY STEAM VALVES

Parker Fluid Control's steam valves are used in a variety of applications including: Dry Cleaning, Steam Irons, Steam Baths,Autoclaves, Molding, Steam Atomization,Sterilizers and Laundry Equipment.

3 WAY SOLENOID VALVES can come in three configurations, normally open, normally closed and universal. Int he universal configuration, the valve can be used for directional control. Usually the NO or NC valves are used to operate cylinders or other air actuated devices. The valves can have voltages of 120/60, 24/60, 240/60, 480/60, 12vdc, 24vdc, 120vdc, 240vdc. Pressure ratings from 0 to 3000 psi.

3 WAY ACTUATION VALVE

Parker Fluid Control's valve actuation product offering includes a variety of three- and four-way valves designed with unique features and options enhancing their performance, operational reliability anda pplication versatility. The Series includes All-Ports-In-Body valves, Intrinsically Safevalves, Quick Exhaust valves, Direct Mount valves with NAMUR interface, Ultra Low-Power valves, along with a host ofaccessories and options. In addition, to satisfy the most stringent environmental demands, most valves are available in a choice of body materials including brass, stainless steel, and aluminum, as well as avariety of elastomeric seals.

3 WAY DIRECT ACTING VALVES

3 WAY INTRINSICALLY SAFE

3 WAY MANUAL RESET VALVES

Parker Fluid Control's manual reset solenoid valves are designed for use in emergency. These valves are designed so that once they are actuated, the valve will not change its operating position, unless it is manually reset.

3 WAY PILOT OPERATED VALVES

3 WAY QUICK EXHAUST VALVES

Parker Fluid Control's quick exhaust valves are designed to provide large exhaust orifice for quick exhaust. Increased exhaust capacity significantly reduces cycle time for single acting spring return actuators.

3 WAY REMOTE PRESSURE OPERATED VALVES

4 WAY SOLENOID VALVES are used to operate cylinders and double acting cylinders. 4-way valves can have 4 or 5 ports. One is the pressure inlet port and the remainder are the cylinder and exhaust ports.

4 WAY ACTUATION VALVES

Parker Fluid Control's valve actuation product offering includes a variety of three- and four-way valves designed with unique features and options enhancing their performance, operational reliability and application versatility. The Series includes All-Ports-In-Body valves, Intrinsically Safevalves, Quick Exhaust valves, Direct Mount valves with NAMUR interface, Ultra Low-Power valves, along with a host ofaccessories and options. In addition, to satisfy the most stringent environmental demands, most valves are available in a choice of body materials including brass, stainless steel, and aluminum, as well as avariety of elastomeric seals.

4 WAY DIRECT ACTING VALVES

4 WAY INTRINSICALLY SAFE

4 WAY PILOT OPERATED VALVES

Purchase valves at Flow Factor.

866-360-9830

American Meter Regulators

2010-08-29T05:40:00.000-07:00

Elster American Meter provides Gas regulators as well as Gas Meters.

Gas Regulation Products
Elster American Meter gas pressure governors and regulators meet the highest demands concerning quality and capacity. The products range reaches from small low pressure domestic, medium and high pressure regulators, spring or pilot-operated, through the full field of application also to LPG equipment and purpose built regulator/metering units.

Low Pressure Delivery Regulators(5 psig or less)
Once the decision has been made that a low-pressure regulator is needed, there are various options available in regulators that should be considered. Elster American Meter offers different regulator models that include options for protection against abnormal operating conditions. The most common options being:
Internal relief (partial or full)
Overpressure Shut-Off (OPSO)
Underpressure Shut-Off (UPSO)
Remote Sensing

Each series of low-pressure Elster American Meter regulators offer various combinations of inlet/outlet pressure ranges and maximum capacities. Elster American Meter has various low-pressure regulators to fit your need.

Elster American Meter SR100 Series Service Regulator
The compact, high capacity SR113 service regulator is designed for residential or light commercial/industrial applications using various hydrocarbon or other non-corrosive gases.

Elster American Meter J48 (up to 2 inch size)
Outlet pressures from 2" W.C. up to 64" W.C. Operating temperature range is -4°F to +158°F (-20°C to + 70°C) with a maximum allowable pressure of 5 PSIG (350 mbar). Flow rates up to 28040 SCFH (800 SCMH).

Elster American Meter J78Gas regulator 1/2'', 3/4'', 1''. Inlet pressure up to 350 mbar

Elster American Meter 1200B series pressure regulators are designed for natural gas residential applications.

Elster American Meter 1200B2 series pressure regulators for natural gas residential applications

The Elster American Meter 1800B2 Series pressure regulators are designed for natural gas applications. This series is ideal for light commercial and industrial use.

The Elster American Meter 1800C pressure regulators are designed for natural gas applications. Within this series, the models are designed to assure the fast release of gas.

Elster American Meter 1800CPB2 series pressure regulators for natural gas applications

Elster American Meter 3000 industrial regulator for distribution, commercial and industrial applications

Elster American Meter CR4000 is a standard service regulator. With easy installation, CR4000 offers excellent relief performance.

Medium Pressure Delivery Regulators(6 to 60 psig)
Once the decision has been made that a medium-pressure regulator is needed, there are various options available in regulators that should be considered. Elster American Meter offers different regulator models that include options for protection against abnormal operating conditions. The most common options being:
Internal relief (partial or full)
Overpressure Shut-Off (OPSO)
Underpressure Shut-Off (UPSO)
Remote Sensing
Each series of medium-pressure regulators offer various combinations of inlet/outlet pressure ranges and maximum capacities. Elster American Meter has various medium-pressure regulators to fit your need.

The 1800/2000 Industrial Regulator Series is offered as the most ruggedly built industrial regulators on the market today. Design improvements now enable all models to be configured as Monitor Regulators.

High Pressure Delivery Regulators(Over 60 psig)Once the decision has been made that a high-pressure regulator is needed, there are various options available in regulators that should be considered. Elster American Meter offers the Axial Flow Valve.

The Axial flow valve can be used for pressure regulation, over pressure relief, flow control or act as an on/off valve. This unique design provides a valve that is extremely compact and lightweight

http://www.flowfactor.com/

Parker 204/209/304/309 Valves

2010-07-15T13:39:00.000-07:00

Parker Miniature Solenoid Valves

Parker Fluid Control Division, manufacturers of the Skinner and Gold Ring lines of solenoid valves and the Sinclair Collins line of process control valves, has introduced an integrated coil for its Series 204 and 304 solenoid valves. Featuring easy installation, the integrated coil is the latest in the division's list of flexible production options for these small yet powerful solenoid valves. The patent-pending NEMA 4X coil with rotating conduit hub permits easy installation. The valve lines also include interchangeable AC and DC coils as well as a tab coil for flexible production possibilities. Both the Series 204 and 304 also feature a complete line of high-temperature watertight coil designs to meet the most demanding environmental conditions. The Series 204 (two-way) and the Series 304 (three-way) are available as normally closed and normally open valves. Maximized flow rates are delivered through orifice sizes ranging from 1/32" to 5/32". Additionally, the valve line is manufactured with 1/8" port size (NPT) connections. The new product lines offer a family of direct-acting solenoid valves for air and liquid (including light oil) applications. These valves meet virtually all of today's commercial, industrial, mobile, instrumentation and medical market needs. State-of-the-art performance characteristics ensure a long life and maximized pressure ratings. Economy models are available for less demanding applications.The integrated coil has been evaluated by Underwriters Laboratories and complies with the RoHS (Restrictions of Hazardous Substances) standard under the European Directive 2002/95/EC.

Parker Valves can be Purchased on Flow Factor.

American Meter Gas Products ~ Rotary Meters

2010-05-10T05:43:00.000-07:00

Rotary Meters by Elster American Meter at Flow Factor.

Elster American Meters offers rotary meters as the RPM Series. These new rotary meters provide accurate flow measurement and outstanding performance in the most adverse conditions.

RPM-CMTC

Meter with Continuous Mechanical Temperature Compensator

RPM-STD

STANDARD meter with uncorrected mechanical register.

RPM-ID

Meter with uncorrected mechanical register and instrument drive platform.

RPM-CMTC-ID

Meter with Continuous Mechanical Temperature Compensator and instrument drive for mounting a pressure-compensating index or pressure corrector.

RPM-CMTC with Direct-Mount ERT

Meter with Continuous Mechanical Temperature Compensation. No more instrument drive accessory and sandwich pulsers are needed. The ERT can be programmed at our factory, in your meter shop or in the field.

www.flowfactor.com

American Meter Gas Products ~ Diaphragm Meters

2010-05-09T15:01:00.000-07:00

AC-250 Diaphragm Meter

The aluminum class Elster American Meter AC-250 is the industry's most cost-effective gas meter for residential applications. It is unequaled for accuracy retention and for life cycle maintenance economies.

AM-250 Diaphragm Meter

Elster American Meter Special application, residential gas meter available in either 5 PSIG or 10 PSIG Maximum Allowable Operating Pressure with a badge rate of 250 cfh (.60 gravity gas) at 1/2-inch W.C. differential

AT-210 Diaphragm Meter

The Elster American Meter AT-210 and AT-250 meters have a 5 PSIG Maximum Allowable Operating Pressure and can flow either 210 or 250 cubic feet per hour at 1/2” W.C. differential pressure.

AL-425 Diaphragm Meter

The Elster American Meter AL-425 diaphragm meter is ideally suited for larger residential or small commercial/industrial installations. Compatible with automatic meter reading technology.

AC-630 Diaphragm Meter

The AC-630, another of the diaphragm meters in the Elster American Meter product line, provides the customer with rugged durability and accurate long-term performance. Compatible with automatic meter reading technology.

BK-G4 Meter

The Elster American Meter BK-G4 is a synthetic diaphragm meter with the latest technology and injection-molded aluminum body.

AL-800 AL-1000

The Elster American Meter AL-800/AL-1000 diaphragm meters are for usage in commercial/industrial applications. These meters are compact and lightweight, but are designed for positive displacement accuracy for industrial/commercial loads.

AL-1400/AL-2300/AL-5000

The Elster Meter Services Refurbish program applies to AL-1400/AL-2300/AL-5000 series Elster American or Elster Canadian meters, suggested for fifteen (15) years old and newer.

www.flowfactor.com

Buy Elster American Meter Products Online

American Meter Gas Products

2010-05-09T12:41:00.000-07:00

Elster American Meter

Elster American Meter has been a leader in the measurement and control of natural gas since the very beginnings of the industry. Today, we continue to fulfill that role as part of Elster Gas North America. This global organization brings the latest technology and best practices from leading European and American manufactures of gas measurement and control equipment to markets around the world.

At Elster American Meter, we have a history of design innovations that have consistently improved the accuracy and the service life of gas meters. We pioneered the shift to aluminum-case meters as a replacement for cast iron and introduced the molded convoluted diaphragm that established new standards for long-term accuracy and reliability. For over 160 years, Elster American Meter continues to pave the way for advancement in the gas industry.

Whether it’s regulation, metering, data collection, data transfer or evaluation, Elster American Meter offers solutions for every application – customized to the specific needs of each individual customer – either as single components or complete systems.

The metering and regulation product range covers devices for measuring consumption which can be used both for custody and non-custody transfer as well as traditional gas regulators for low, medium and high pressures.

For the field of gas metering, Elster American Meter has also developed volume correctors and flow computers. These range from temperature volume correctors for commercial customers to flow computers for stations in the fields of gas distribution and transportation.

Elster American Meter is the industry’s leading supplier of diaphragm meters. With models to meet your applications from domestic service to large industrial uses, Elster American Meter diaphragm meters have an outstanding record for durability and reliability.

buy at www.flowfactor.com

Penberthy Magnetic Level Gages

2010-02-21T06:28:00.000-08:00

Penberthy's MULTIVIEW™ Magnetic Liquid Level Gages can be built to serve practically any process industry situation. From the simplest operation to the most severe, corrosive environment, Penberthy can construct a system to best suit your company’s requirements. As pioneers in magnetic gage level indication and as creators of the unique concentric magnet design, Penberthy has the expertise to know what design, specifications and options best fit any given application. Contact a Penberthy representative to discuss specific duty requirements in your operation.

MULTIVIEW™ Magnetic Liquid Level Gages utilize a communicating chamber constructed of 2-1/2" pipe which is connected to the process tank with either side or end connections. A float with a self-enclosed magnet is custom sized and weighted to float at the surface of the process liquid to be monitored. The float is then installed in the communicating chamber.

The industry-unique concentric magnet in MULTIVIEW™ gages provides a more consistent magnetic field than conventional magnet designs.

Construction Materials AvailablePenberthy offers a wide range of materials, including:

304/304L STS
316/316L STS
Alloy-20
Monel
Titanium
Hastelloy-C
PVC
CPVC
PVDF
Tefzel® Lined
Halar® Lined

Typical Process Applications
Sodium Hypochlorite
Boiler Feedwater Tank
Hydrochloric Acid
Stop Oil
LPG
Interface
Dowtherm®
Sulfuric Acid
Hydrogen Sulfide
Oil/Water Separator
Sodium Hydroxide
Liquid Nitrogen
Flare Drums
Phosgene
Jet Fuel
Molten Sulfur
Sour Oil
Diesel Fuel
Deionized Water
Sumps
Freon
Liquid Ethylene
Water
Underground Storage
Benzene
Asphalt Settler
Acetic Acid
Liquids & Slurries

Follower Style Indicator

In MG Follower-Type models, the unit consists of a hermetically-sealed tube in a protective view housing. Within this tube is a gold anodized aluminum follower which will mirror level changes in the process tank. This entire assembly is attached to the communicating chamber where the follower is magnetically coupled with the float. Because the follower and float are magnetically linked, liquid level changes in the process tank will cause both float and follower to rise and fall in unison. The result is a precise indication of the liquid level within the vessel.

Flag Style Indicator

MG Flag-Type monitors provide a more secure link between the indicator and float. The view housing is sealed and consists of a single column assembly of aluminum flags within an extruded aluminum channel. These flags are anodized with black on one side and gold on the other. Each flag houses a small magnet and is assembled on a single, individual axle. As the float in the communicating chamber rises and falls, the magnetic interaction between float and flag magnets cause the flags to rotate 180°. These changes are shown through contrasting colors – black above and gold below the liquid level.

To insure trouble-free operation, Penberthy's flags are magnetically interlocked and utilize mechanical stops. This prevents over-rotation. Penberthy's redundant axle system prevents binding, with each flag allowed to rotate on the axle and each axle free to rotate in the channel. This method of indication is always accurate, regardless of the speed of process level change or vibration.

Switches can be added to the level gage for point level control.

MGS Switches provide non-intrusive point-level control and contain no mercury. They allow you to be environmentally safe without sacrificing accuracy.

MGS-314: SPDT 5A service

MGS-314D: DPDT 10A service

MGS-314L: SPDT 1A service used with standard MULTIVIEW?

MGS-314M: SPDT 1A service used with either TMMG (Top Mount Magnetic Gage) or MMG (Mini Magnetic Gage)

Transmitters can be added for continuous level control.

MGT Transmitters provide continuous level indication to remote locations via 4 to 20 mA loop-powered operation.

MGT-362: A reed switch based unit available in integral and remote mounting styles

MGT-362B or C: An in-tank reed switch based unit. The MGT-362B is an NPT-mounted assembly. The MGT-362C is a flange-mounted assembly. Both are available in integral or remote mounting styles.

MGT-367: A magnetostrictive transmitter available with or without Hart protocol.

Please visit our web site and fill our our Penberthy form for more information.

Flow Factor and Industrial Flow Products

2010-02-20T11:22:00.000-08:00

Flow Factor sells products to control media in flow situations, tanks and pipes.

These products include solenoid valves, pressure switches, temperature switches, level control and switches, gauge, jet pumps and flow switches and monitoring.

Some of the products sold are ASCO, Parker, Ametek, Erdco, Penberthy, Process Technology, US Gauge, King and Robertshaw.

Rating the valve capacity in terms which apply to all operating conditions is accomplished by determining the "Flow Factor" (Cv) of the valve.
The Cv value is the number of U.S. gallons of water at 16°C (60°F) per minute that, when flowing through the valve, causes a pressure drop of 1 PSI.
There are five main parameters to consider when selecting a valve: Cv, media compatibility, pressure, temperature, and process fitting.

The flow factor or Cv can be very important in valve selection. The Cv can be used to compare valves to insure similar flow capacities.

Our Jet pumps or Eductors can be used to mix, heat, and pump medias without electrical power.
Site flows are used to give a visual indication of process flow.
Gauges are used to measure and give visual indication of temperatures, flows, and pressures.
Level control is used to monitor and measure levels in tanks and vessals.

Ametek-U.S. Gauge - U.S. Gauge is one of the world's leading suppliers of high quality, competitively priced pressure and temperature measurement products. Founded in 1904, USG's product offering includes bourdon tube and diaphragm capsule pressure gauges ranging in size from 1-1/2 inches to 6 inches; with brass, stainless steel, alloy steel or Monel internals.

ERDCO - ERDCO® offers a complete line of flowmeters, sight flow indicators, flow transmitters and flow indicating switches. We employ elegantly simple measuring technologies with proven reliability in utility fluid applications.

King Instruments - King Flowmeters provide exceptional performance in a wide range of industrial, commercial and specialty applications. King offers more styles, sizes, features and options to satisfy all your rotameter requirements.

ASCO General Controls - Solenoid Gas Valves, including Pilot Gas Shutoff Valves and Main Gas Shutoff Valves; Solenoid Oil Shutoff Valves; Hydramotor Oil Valves and Hydramotor Gas Valves.

Penberthy/Tyco Flow control - EDUCTORS / EJECTORS / JET PUMPS, LIQUID LEVEL GAGES & GAGECOCKS, MAGNETIC LIQUID LEVEL GAGES, SIGHT FLOW INDICATORS & SIGHT WINDOWS, ULTRASONIC LEVEL INSTRUMENTATION, BOILER TRIM / CONDUCTIVITY PROBES AND HIGH PRESSURE GLASS GAGES

Barksdale - Barksdale offers both mechanical and electronic pressure, temperature and level instrumentation solutions for all industrial applications.

Process Technology - Manufactured in an ISO 5 (class 100) cleanroom, these products include: UPDI water heaters, inline fluoropolymer and quartz chemical heaters, a large selection of fluoropolymer chemical bath systems, solvent heaters and nitrogen heaters. Semi S2/S3 and CE compliant; ETL/UL certified.

Robertshaw - Robertshaw offers RF capacitance level control technology for virtually any substance in any type of vessel. Solid state, digital designs offer on/off and continuous level measurement in all types of vessels. Using the power generated from the process, Robertshaw self-actuated regulators are simple, complete control units built to the highest quality specifications to assure satisfactory service for many years.

Please visit us at www.flowfactor.com